main
History Download
Ray Publish 0.1.0 f468444

A5988GJPTR-T

Allegro MicroSystems, LLC · Motor Driver ICs · LQFP-48-EP(7x7)

A5988GJPTR-T from Allegro MicroSystems, LLC, in a LQFP-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
2 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
3 OUT1A output DMOS Full-Bridge 1 Output A, rated up to 1.6 A and 40 V per bridge output.
4 SENSE1 passive Sense resistor terminal for Bridge 1; SENSEx pin voltage must not exceed the 500 mV maximum.
5 OUT1B output DMOS Full-Bridge 1 Output B, rated up to 1.6 A and 40 V per bridge output.
6 VBB1 power_in Load supply voltage for bridges 1 and 2, operating range 8 to 40 V.
7 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
8 OUT2B output DMOS Full-Bridge 2 Output B, rated up to 1.6 A and 40 V per bridge output.
9 SENSE2 passive Sense resistor terminal for Bridge 2; SENSEx pin voltage must not exceed the 500 mV maximum.
10 OUT2A output DMOS Full-Bridge 2 Output A, rated up to 1.6 A and 40 V per bridge output.
11 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
12 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
13 PHASE4 input Control input for Bridge 4 direction, used with the industry standard I1, I0 and PHASE interface.
14 PHASE3 input Control input for Bridge 3 direction, used with the industry standard I1, I0 and PHASE interface.
15 SLEEPn input Active low sleep mode input; bringing it low puts the device into Sleep Mode and disables the charge pump.
16 VREF1 input Analog input setting the current reference for Bridge 1, input range 0.0 to 1.5 V.
17 VREF2 input Analog input setting the current reference for Bridge 2, input range 0.0 to 1.5 V.
18 VREF3 input Analog input setting the current reference for Bridge 3, input range 0.0 to 1.5 V.
19 VREF4 input Analog input setting the current reference for Bridge 4, input range 0.0 to 1.5 V.
20 GND power_in Analog and digital ground; must be connected together with PGND and the thermal pad externally under the device.
21 PHASE2 input Control input for Bridge 2 direction, used with the industry standard I1, I0 and PHASE interface.
22 PHASE1 input Control input for Bridge 1 direction, used with the industry standard I1, I0 and PHASE interface.
23 FAULTn output Open drain fault output, pulled low when an overcurrent protection event latches the outputs off (JP package only).
24 I14 input Control input I14 for Bridge 4 current step selection, used with the I1, I0 and PHASE interface.
25 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
26 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
27 OUT4A output DMOS Full-Bridge 4 Output A, rated up to 1.6 A and 40 V per bridge output.
28 SENSE4 passive Sense resistor terminal for Bridge 4; SENSEx pin voltage must not exceed the 500 mV maximum.
29 OUT4B output DMOS Full-Bridge 4 Output B, rated up to 1.6 A and 40 V per bridge output.
30 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
31 VBB2 power_in Load supply voltage for bridges 3 and 4, operating range 8 to 40 V.
32 OUT3B output DMOS Full-Bridge 3 Output B, rated up to 1.6 A and 40 V per bridge output.
33 SENSE3 passive Sense resistor terminal for Bridge 3; SENSEx pin voltage must not exceed the 500 mV maximum.
34 OUT3A output DMOS Full-Bridge 3 Output A, rated up to 1.6 A and 40 V per bridge output.
35 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
36 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
37 I13 input Control input I13 for Bridge 3 current step selection, used with the I1, I0 and PHASE interface.
38 I12 input Control input I12 for Bridge 2 current step selection, used with the I1, I0 and PHASE interface.
39 I11 input Control input I11 for Bridge 1 current step selection, used with the I1, I0 and PHASE interface.
40 PGND power_in Power ground; must be connected together with GND and the thermal pad externally under the device.
41 NC unconnected No Connect terminal, listed as not connected in the JP terminal list.
42 VCP passive Reservoir capacitor terminal; a 0.1 uF ceramic capacitor is required between VCP and VBBx.
43 CP1 passive Charge pump capacitor terminal; a 0.1 uF ceramic capacitor is connected between CP1 and CP2.
44 CP2 passive Charge pump capacitor terminal; a 0.1 uF ceramic capacitor is connected between CP1 and CP2.
45 I01 input Control input I01 for Bridge 1 current step selection, used with the I1, I0 and PHASE interface.
46 I02 input Control input I02 for Bridge 2 current step selection, used with the I1, I0 and PHASE interface.
47 I03 input Control input I03 for Bridge 3 current step selection, used with the I1, I0 and PHASE interface.
48 I04 input Control input I04 for Bridge 4 current step selection, used with the I1, I0 and PHASE interface.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package LQFP-48-EP(7x7)
Category Power Management ICs
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Load Supply Voltage Range VBB 8 40 V Operating 4
Source driver on resistance RDS(on) 500 600 mΩ Source driver, IOUT = -1.2 A, TJ = 25°C 4
Sink driver on resistance RDS(on) 500 600 mΩ Sink driver, IOUT = 1.2 A, TJ = 25°C 4
Output diode forward voltage Vf 1.2 V IOUT = 1.2 A 4
Output Leakage IDSS -20 20 µA Outputs, VOUT = 0 to VBB 4
VBB Supply Current, outputs on IBB 23 mA IOUT = 0 mA, outputs on, PWM = 50 kHz, DC = 50% 4
VBB Supply Current, outputs off IBB 13.7 16 mA Outputs off 4
VBB Supply Current, sleep mode IBB -10 1 10 µA Sleep mode (typ printed as <1) 4
Output Driver Slew Rate SROUT 50 100 150 ns 10% to 90% 4
Logic Input Voltage high VIN(1) 2 V 4
Logic Input Voltage low VIN(0) 0.8 V 4
Logic Input Current IIN -20 1 20 µA VIN = 0 to 5 V (typ printed as <1) 4
Logic Input Hysteresis Vhys 150 300 500 mV 4
Sleep Rising Threshold 2.5 2.7 2.95 V 4
Sleep Falling Threshold 2.4 V 4
Sleep Hysteresis 250 325 450 mV 4
Sleep Input Current 100 150 µA 4
Crossover Delay tCOD 250 425 1000 ns 4
Blank Time tBLANK 0.7 1 1.3 µs 4
VREFx Pin Input Voltage Range VREFx 0 1.5 V Operating 4
VREFx Pin Reference Input Current IREF 1 μA VREF = 1.5 (printed ±1) 4
Current Trip-Level Error, 100% VERR -5 5 % VREF = 1.5, phase current = 100% 4
Current Trip-Level Error, 67% VERR -5 5 % VREF = 1.5, phase current = 67% 4
Current Trip-Level Error, 33% VERR -15 15 % VREF = 1.5, phase current = 33% 4
VBB UVLO Threshold VUV(VBB) 7.3 7.6 7.9 V VBB rising 4
VBB Hysteresis VUV(VBB)hys 400 500 600 mV 4
Overcurrent Protection Threshold 1.6 A 4
Fault Output Voltage 0.5 V IOUT = 1 mA 4
Fault Output Leakage Current 1 µA No fault, VOUT = 5 V 4
Thermal Shutdown Temperature TJTSD 155 165 175 °C 4
Thermal Shutdown Hysteresis TJTSDhys 15 °C 4
Load Supply Voltage VBB -0.5 40 V 2
Output Current IOUT 1.6 A May be limited by duty cycle, ambient temperature, and heat sinking; do not exceed TJ 150°C 2
Logic Input Voltage Range VIN -0.3 7 V 2
SENSEx Pin Voltage VSENSEx 0.5 V 2
SENSEx Pin Voltage, pulsed VSENSEx 2.5 V Pulsed tw < 1 µs 2
VREFx Pin Voltage VREFx 2.5 V 2
Operating Temperature Range TA -40 105 ºC Range G 2
Junction Temperature TJ(max) 150 ºC 2
Storage Temperature Range Tstg -40 125 ºC 2
Package Thermal Resistance RθJA 23 ºC/W JP package, 4-layer PCB based on JEDEC standard 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin package height of 0.90 mm. The JP is a 7 mm × 7 mm 48-pin LQFP. Both packages are lead (Pb) free, with 100% matte-tin 1

CAD (KiCad official)

  • Symbol: A5988GJPTR-T
  • Footprint: Package_QFP:LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm
  • 3D model: LQFP-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: a5988gjptr-t-etched.step / a5988gjptr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a5988gjptr-t.step / a5988gjptr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (14 pp, sha256 235b3dadc51d1813, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF