main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers a3959slptr-t: viewers rendered from the public page · Ray
a3959slptr-t-etched.glb Publish 0.1.0 · Ray
a3959slptr-t-etched.step a3959slptr-t: factory component page (tier=lcsc) · Ray
a3959slptr-t-hero.glb a3959slptr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a3959slptr-t-hero.overlay.json Publish 0.1.0 · Ray
a3959slptr-t.glb Publish 0.1.0 · Ray
a3959slptr-t.kicad_mod Publish 0.1.0 · Ray
a3959slptr-t.kicad_sym Publish 0.1.0 · Ray
a3959slptr-t.lbr Publish 0.1.0 · Ray
a3959slptr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 29 pins · Ray

A3959SLPTR-T

Allegro MicroSystems, LLC · Brushed DC Motor Drivers · TSSOP-28-EP

A3959SLPTR-T from Allegro MicroSystems, LLC, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CP passive Reservoir capacitor terminal; a 0.22 µF ceramic capacitor connects CP to VBB to act as the reservoir for the high-side DMOS devices.
2 CP1 passive Charge-pump capacitor terminal; a 0.22 µF ceramic capacitor is connected between CP1 and CP2 for pumping.
3 CP2 passive Charge-pump capacitor terminal; a 0.22 µF ceramic capacitor is connected between CP1 and CP2 for pumping.
4 NC unconnected No (internal) connection.
5 PHASE input Logic input for direction control; PHASE 0 gives OUTA low and OUTB high, PHASE 1 gives OUTA high and OUTB low.
6 ROSC passive Oscillator resistor to VDD; typical 51 kΩ sets 4 MHz, with an allowable range of 20 kΩ to 100 kΩ (shorted to ground if not pulled up to VDD).
7 GROUND power_in Ground; for the LP package, terminals 7, 8 and 28 should be connected together at the exposed pad beneath the device.
8 GROUND power_in Ground; for the LP package, terminals 7, 8 and 28 should be connected together at the exposed pad beneath the device.
9 VDD power_in Logic supply, the low-voltage supply typically 5 V.
10 ENABLE input Logic input for enable control; ENABLE high turns on the selected sink-source pair and ENABLE low chops the outputs.
11 NC unconnected No (internal) connection.
12 PFD2 input Logic-level input for fast-decay selection; together with PFD1 it sets slow, mixed or fast current decay.
13 BLANK input Logic-level input for blanking control; BLANK 0 gives 6/fosc blanking time and BLANK 1 gives 12/fosc.
14 PFD1 input Logic-level input for fast-decay selection; together with PFD2 it sets slow, mixed or fast current decay.
15 REF input VREF load current reference input voltage; the trip current is ITRIP = VREF/10RS.
16 EXT MODE input Logic input for PWM mode control; EXT MODE low selects fast decay and EXT MODE high selects slow decay during external PWM.
17 NO CONNECT unconnected No (internal) connection.
18 OUTA output One of two DMOS bridge outputs to the motor; repetitive output current rating ±3.0 A, peak ±6.0 A for less than 3 µs.
19 NC unconnected No (internal) connection.
20 NC unconnected No (internal) connection.
21 SENSE input Sense resistor input; continuous sense voltage rating 0.5 V and 2.5 V for tw < 3 µs, with the sense resistor requiring an independent ground return.
22 NC unconnected No (internal) connection.
23 VBB power_in Load supply, the high-current motor supply rated 9.5 V to 50 V.
24 OUTB output One of two DMOS bridge outputs to the motor; repetitive output current rating ±3.0 A, peak ±6.0 A for less than 3 µs.
25 NO CONNECT unconnected No (internal) connection.
26 SLEEP input Logic-level input for sleep operation; logic low puts the device into sleep mode, and if sleep is unused a 5 kΩ pull-up to VDD is required.
27 VREG passive Regulator decoupling capacitor terminal; a 0.22 µF capacitor to ground is recommended.
28 GROUND power_in Ground; for the LP package, terminals 7, 8 and 28 should be connected together at the exposed pad beneath the device.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package TSSOP-28-EP
Category Motor Driver ICs
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Load Supply Voltage (absolute maximum) VBB 50 V 2
Logic Supply Voltage (absolute maximum) VDD 7 V 2
Input Voltage (absolute maximum) VIN -0.3 V Continuous; upper limit VDD + 0.3 V 2
Input Voltage (absolute maximum) VIN -1 V tw < 30 ns; upper limit VDD + 1.0 V 2
Sense Voltage (absolute maximum) VS 0.5 V Continuous 2
Sense Voltage (absolute maximum) VS 2.5 V tw < 3 µs 2
Output Current (absolute maximum) IOUT -3 3 A Repetitive 2
Output Current (absolute maximum) IOUT -6 6 A Peak, < 3 µs 2
Operating Ambient Temperature (absolute maximum) TA -20 85 °C Range S 2
Maximum Junction Temperature TJ(max) 150 °C 2
Storage Temperature Tstg -55 150 °C 2
Load Supply Voltage Range VBB 9.5 50 V Operating 4
Load Supply Voltage Range VBB 0 50 V During sleep mode 4
Logic Supply Voltage Range VDD 4.5 5 5.5 V Operating 4
Reference Input Voltage Range VREF 0 V Operating; upper limit VDD 4
Output Leakage Current IDSS 20 µA VOUT = VBB 4
Output Leakage Current IDSS -20 µA VOUT = 0 V 4
Output On Resistance rDS(on) 270 300 mΩ Source driver, IOUT = -3 A 4
Crossover Delay 300 600 1000 ns 4
Body Diode Forward Voltage VF 1.6 V Source diode, IF = -3 A 4
Load Supply Current IBB 4 7 mA fPWM < 50 kHz 4
Load Supply Current IBB 2 5 mA Charge pump on, outputs disabled 4
Load Supply Current IBB 20 µA Sleep mode 4
Logic Input Voltage VIN(1) 2 V 4
Logic Input Voltage VIN(0) 0.8 V 4
Logic Input Current (all inputs except ENABLE) IIN(1) 20 µA VIN = 2.0 V 4
Logic Input Current (all inputs except ENABLE) IIN(0) -20 µA VIN = 0.8 V 4
Logic Supply Current IDD 6 10 mA fPWM < 50 kHz 4
Logic Supply Current IDD 2 mA Sleep mode 4
ENABLE Input Current IIN(1) 40 100 µA VIN = 2.0 V 4
ENABLE Input Current IIN(0) 16 40 µA VIN = 0.8 V 4
Internal OSC Frequency fOSC 3.25 4.25 5.25 MHz ROSC shorted to GROUND 4
Internal OSC Frequency fOSC 3.65 4.25 4.85 MHz ROSC = 51 kΩ 4
Reference Input Current IREF -1 1 µA VREF = VDD 4
Comparator Input Offset Voltage VIO -5 5 mV VREF = 0 V 4
Gm Error EGm -4 4 % VREF = VDD 5
Gm Error EGm -14 14 % VREF = 0.5 V 5
Propagation Delay Time tpd 600 750 1200 ns 0.5 Ein to 0.9 Eout; PWM change to source on 5
Propagation Delay Time tpd 50 150 350 ns 0.5 Ein to 0.9 Eout; PWM change to source off 5
Propagation Delay Time tpd 50 100 150 ns 0.5 Ein to 0.9 Eout; PWM change to sink off 5
UVLO Enable Threshold VUVLO 3.9 4.2 4.45 V Increasing VDD 5
UVLO Hysteresis ΔVUVLO 0.05 0.1 V 5
Package Thermal Resistance, Junction to Ambient (LP, 1-layer PCB) RθJA 100 °C/W LP package; 1-layer PCB, minimal exposed copper area 3
Package Thermal Resistance, Junction to Ambient (LP, 2-layer PCB) RθJA 40 °C/W LP package; 2-layer PCB, 1-in.² 2-oz copper exposed area 3
Package Thermal Resistance, Junction to Ambient (LP, 4-layer PCB) RθJA 28 °C/W LP package; 4-layer PCB, based on JEDEC standard 3
Package Thermal Resistance, Junction to Pad RθJP 2 °C/W LP package 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin is lead (Pb) free, with 100% matte tin leadframes. 29319.37L, Rev. 14 1

CAD (KiCad official)

  • Symbol: A3959SLPTR-T
  • Footprint: Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm
  • 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
  • 3D model files: a3959slptr-t-etched.step / a3959slptr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a3959slptr-t.step / a3959slptr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (12 pp, sha256 a424976468934aa8, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF