main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
states a-sc5050argbc-b01-03-1t: factory component page (tier=lcsc) · Ray
viewers a-sc5050argbc-b01-03-1t: viewers · Ray
a-sc5050argbc-b01-03-1t-etched.glb Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t-etched.step a-sc5050argbc-b01-03-1t: factory component page (tier=lcsc) · Ray
a-sc5050argbc-b01-03-1t-hero.glb a-sc5050argbc-b01-03-1t: hero GLB from the etched model (keeps the MPN mark) · Ray
a-sc5050argbc-b01-03-1t-hero.overlay.json Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t.glb Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t.kicad_mod Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t.kicad_sym Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t.lbr Publish 0.1.0 · Ray
a-sc5050argbc-b01-03-1t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
states.json a-sc5050argbc-b01-03-1t: factory component page (tier=lcsc) · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

A-SC5050ARGBC-B01-03-1T

Amicc · RGB LEDs · SMD5050-6P

A-SC5050ARGBC-B01-03-1T from Amicc, in a SMD5050-6P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connection; the datasheet lists NC with no function stated.
2 BIN input Backup signal input pin used for the breakpoint-resume function, so a damaged upstream pixel does not stop following data.
3 VDD power_in Chip supply voltage, 5V±10% (operating range 3.7V to 5.3V, absolute maximum 6.0V), with a 0.1uF bypass capacitor recommended at each LED.
4 GND power_in Ground.
5 DO output Data output that forwards the remaining reshaped data, 24 bits fewer per pixel, to the next cascaded pixel.
6 DIN input Data input for the single-wire signal, with VIH of VDD0.7 minimum and VIL of VDD0.3 maximum; a 33R damping resistor is recommended in series.

Key specifications

Parameter Value
Manufacturer Amicc
Package SMD5050-6P
Category Optoelectronics
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
电源电压 (Supply voltage) VDD -0.5 6 V 8
输入电压 (Input voltage) Vin -0.5 V 8
G、R、B 输出驱动电流 (G, R, B output drive current) Io 25 mA 8
功率 (Power dissipation) PD 400 mW 8
工作温度 (Operating temperature) Topt -40 85 oC 8
储存温度 (Storage temperature) Tstg -40 150 oC 8
工作电压 (Operating voltage) VDD 3.7 5 5.3 V 8
G、R、B 最大 Sink 电流 (G, R, B maximum sink current) Isink 11.4 12 12.6 mA VDD-VfLED ≧1.2V 8
高电平输入电压 low-side (Low-level input voltage) VIL 0 V Din 8
红光主波长 (Red dominant wavelength) 620 625 nm 6
绿光主波长 (Green dominant wavelength) 520 525 nm 6
蓝光主波长 (Blue dominant wavelength) 465 470 nm 6
红光光通量 (Red luminous flux) 1 2 lm 6
绿光光通量 (Green luminous flux) 2.5 3.5 lm 6
蓝光光通量 (Blue luminous flux) 0.5 1.5 lm 6
T0H 0 码高电平时间容许误差 (T0H 0-code high-time tolerance, nominal 0.3 us) T0H -0.1 0.1 us 9
T1L 1 码低电平时间容许误差 (T1L 1-code low-time tolerance, nominal 0.3 us) T1L -0.1 0.1 us 9

CAD (KiCad official)

  • Symbol: A-SC5050ARGBC-B01-03-1T
  • Footprint: LED_SMD:LED_RGB_5050-6
  • 3D model: SMD5050-6P (KiCad packages3D, STEP)
  • 3D model files: a-sc5050argbc-b01-03-1t-etched.step / a-sc5050argbc-b01-03-1t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a-sc5050argbc-b01-03-1t.step / a-sc5050argbc-b01-03-1t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Amicc datasheet (12 pp, sha256 6b9f622f5e279be3, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF