3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownA-SC5050ARGBC-B01-03-1T
Amicc · RGB LEDs · SMD5050-6P
A-SC5050ARGBC-B01-03-1T from Amicc, in a SMD5050-6P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; the datasheet lists NC with no function stated. |
| 2 | BIN | input | Backup signal input pin used for the breakpoint-resume function, so a damaged upstream pixel does not stop following data. |
| 3 | VDD | power_in | Chip supply voltage, 5V±10% (operating range 3.7V to 5.3V, absolute maximum 6.0V), with a 0.1uF bypass capacitor recommended at each LED. |
| 4 | GND | power_in | Ground. |
| 5 | DO | output | Data output that forwards the remaining reshaped data, 24 bits fewer per pixel, to the next cascaded pixel. |
| 6 | DIN | input | Data input for the single-wire signal, with VIH of VDD0.7 minimum and VIL of VDD0.3 maximum; a 33R damping resistor is recommended in series. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Amicc |
| Package | SMD5050-6P |
| Category | Optoelectronics |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (Supply voltage) | VDD | -0.5 | 6 | V | 8 | ||
| 输入电压 (Input voltage) | Vin | -0.5 | V | 8 | |||
| G、R、B 输出驱动电流 (G, R, B output drive current) | Io | 25 | mA | 8 | |||
| 功率 (Power dissipation) | PD | 400 | mW | 8 | |||
| 工作温度 (Operating temperature) | Topt | -40 | 85 | oC | 8 | ||
| 储存温度 (Storage temperature) | Tstg | -40 | 150 | oC | 8 | ||
| 工作电压 (Operating voltage) | VDD | 3.7 | 5 | 5.3 | V | 8 | |
| G、R、B 最大 Sink 电流 (G, R, B maximum sink current) | Isink | 11.4 | 12 | 12.6 | mA | VDD-VfLED ≧1.2V | 8 |
| 高电平输入电压 low-side (Low-level input voltage) | VIL | 0 | V | Din | 8 | ||
| 红光主波长 (Red dominant wavelength) | 620 | 625 | nm | 6 | |||
| 绿光主波长 (Green dominant wavelength) | 520 | 525 | nm | 6 | |||
| 蓝光主波长 (Blue dominant wavelength) | 465 | 470 | nm | 6 | |||
| 红光光通量 (Red luminous flux) | 1 | 2 | lm | 6 | |||
| 绿光光通量 (Green luminous flux) | 2.5 | 3.5 | lm | 6 | |||
| 蓝光光通量 (Blue luminous flux) | 0.5 | 1.5 | lm | 6 | |||
| T0H 0 码高电平时间容许误差 (T0H 0-code high-time tolerance, nominal 0.3 us) | T0H | -0.1 | 0.1 | us | 9 | ||
| T1L 1 码低电平时间容许误差 (T1L 1-code low-time tolerance, nominal 0.3 us) | T1L | -0.1 | 0.1 | us | 9 |
CAD (KiCad official)
- Symbol:
A-SC5050ARGBC-B01-03-1T - Footprint:
LED_SMD:LED_RGB_5050-6 - 3D model: SMD5050-6P (KiCad packages3D, STEP)
- 3D model files:
a-sc5050argbc-b01-03-1t-etched.step/a-sc5050argbc-b01-03-1t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);a-sc5050argbc-b01-03-1t.step/a-sc5050argbc-b01-03-1t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Amicc datasheet (12 pp, sha256
6b9f622f5e279be3, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).