9774015243R

{
 "schema": "adom/verification@1",
 "part": "9774015243R",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "1 of 1 pins described",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/9774015243r-datasheet.pdf"
    }
   ],
   "files": {
    "9774015243r.kicad_sym": "c74d104b79e0621f6577e9a00bb2fee26324c43d643821a0ee98a97c0b4b8fde",
    "9774015243r.kicad_mod": "ec8b8570276f491f1c22260bd7d1dff66f50d287606b09585d086db0101fbc9d",
    "9774015243r.step": "84ba063f7f0ff1163b34b1ade3b0463080d551a9dd28d5cd431dc27bf5c8e176"
   }
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, ...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, so z min is -1.4 mm while the flange sits on z = 0. This is the real part geometry from the source board, kept deliberately; a person should confirm against the drawing.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against Wurth Elektronik's 9774015243R datasheet (revision 001.003, 2025-12-31)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: the page already carries Wurth's current edition (revision 001.003, 2025-12-31, 6 pages; sha256 matches we-online.com/components/products/datasheet/9774015243R.pdf fetched 2026-10-27). The page's old URL (/catalog/datasheet/) is replaced with the one that serves the file",
     "result": "pass"
    },
    {
     "text": "Single terminal: pin 1 'passive' is the soldered spacer (mechanical part, no pin table in the datasheet); description rewritten from the drawing and land pattern (p.1)",
     "result": "pass"
    },
    {
     "text": "Footprint vs recommended land pattern (p.1): 5.3 mm round copper pad (pad 1, F.Cu) around a 3.0 mm non-plated hole, centred; the 2.8 mm locating collar fits the 3.0 mm hole",
     "result": "pass"
    },
    {
     "text": "Paste vs stencil suggestion (p.1): the footprint draws the paste as four filled quarter-ring polygons on F.Paste (pad 1 itself has no paste layer): inner diameter 3.10, outer 5.12, webs 0.6 mm, vs Wurth's 3.1 / 5.2 / 0.6; outer ring 0.04 mm per side smaller than suggested",
     "result": "note"
    },
    {
     "text": "3D vs drawing (p.1): body 4.35 mm diameter, z 0..1.50 vs L = 1.5 +/-0.1; locating collar 2.80 mm diameter, z -1.40..0 vs 2.8 x 1.4; shoulder seated on z = 0 with the collar in the board hole (z min -1.4 is real geometry); centred on the pad; Z-up",
     "result": "pass"
    },
    {
     "text": "DigiKey 732-7069-2-ND and Mouser 710-9774015243R kept (Wurth Elektronik, 9774015243R)",
     "result": "pass"
    },
    {
     "text": "Footprint: removed the extra pad 1 copy on B.Cu (Wurth's land pattern has the top pad only) and corrected the description to Height = 1.5mm (L = 1.5 mm, p.1)",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify 0.2.0: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Wurth Elektronik, rev 001.003)",
     "href": "https://www.we-online.com/components/products/datasheet/9774015243R.pdf"
    }
   ],
   "files": {
    "9774015243r.kicad_sym": "f8c3933ba4f51bd48bbafc3c64df87f3ac20b1ce3699d24585ea05ae21990e98",
    "9774015243r.kicad_mod": "4174cb98c100ab8ef23fb5ccfc46425be757995249003cd6f49a343891481b1f",
    "9774015243r.step": "84ba063f7f0ff1163b34b1ade3b0463080d551a9dd28d5cd431dc27bf5c8e176"
   }
  }
 ]
}