component

9774015243R

Public Made by Adom

Wurth Elektronik SMT steel spacer / nut, M2 (WA-SMSI), WA-SMSI_9774015243. KiCad symbol, footprint and 3D as used on Adom boards.

Verified 9774015243R

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match

SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Wurth Elektronik's 9774015243R datasheet (revision 001.003, 2025-12-31)files match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: the page already carries Wurth's current edition (revision 001.003, 2025-12-31, 6 pages; sha256 matches we-online.com/components/products/datasheet/9774015243R.pdf fetched 2026-10-27). The page's old URL (/catalog/datasheet/) is replaced with the one that serves the file
✓Single terminal: pin 1 'passive' is the soldered spacer (mechanical part, no pin table in the datasheet); description rewritten from the drawing and land pattern (p.1)
✓Footprint vs recommended land pattern (p.1): 5.3 mm round copper pad (pad 1, F.Cu) around a 3.0 mm non-plated hole, centred; the 2.8 mm locating collar fits the 3.0 mm hole
•Paste vs stencil suggestion (p.1): the footprint draws the paste as four filled quarter-ring polygons on F.Paste (pad 1 itself has no paste layer): inner diameter 3.10, outer 5.12, webs 0.6 mm, vs Wurth's 3.1 / 5.2 / 0.6; outer ring 0.04 mm per side smaller than suggested
✓3D vs drawing (p.1): body 4.35 mm diameter, z 0..1.50 vs L = 1.5 +/-0.1; locating collar 2.80 mm diameter, z -1.40..0 vs 2.8 x 1.4; shoulder seated on z = 0 with the collar in the board hole (z min -1.4 is real geometry); centred on the pad; Z-up
✓DigiKey 732-7069-2-ND and Mouser 710-9774015243R kept (Wurth Elektronik, 9774015243R)
✓Footprint: removed the extra pad 1 copy on B.Cu (Wurth's land pattern has the top pad only) and corrected the description to Height = 1.5mm (L = 1.5 mm, p.1)
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify 0.2.0: all checks pass

Evidencedatasheet (Wurth Elektronik, rev 001.003)

Verified files✓ 9774015243r.kicad_sym✓ 9774015243r.kicad_mod✓ 9774015243r.step

9 Oct 2026Claude (AI build)3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, ...superseded

reviewfor all variants

•3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, so z min is -1.4 mm while the flange sits on z = 0. This is the real part geometry from the source board, kept deliberately; a person should confirm against the drawing.

9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓1 of 1 pins described
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! 9774015243r.kicad_sym! 9774015243r.kicad_mod✓ 9774015243r.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.