component

9774015243R

Public Made by Adom

by adom

Wurth Elektronik SMT steel spacer / nut, M2 (WA-SMSI), WA-SMSI_9774015243. KiCad symbol, footprint and 3D as used on Adom boards.

componentmechanical9774015243rboard-derived

Verified 9774015243R

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Wurth Elektronik's 9774015243R datasheet (revision 001.003, 2025-12-31)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries Wurth's current edition (revision 001.003, 2025-12-31, 6 pages; sha256 matches we-online.com/components/products/datasheet/9774015243R.pdf fetched 2026-10-27). The page's old URL (/catalog/datasheet/) is replaced with the one that serves the file
  • ✓Single terminal: pin 1 'passive' is the soldered spacer (mechanical part, no pin table in the datasheet); description rewritten from the drawing and land pattern (p.1)
  • ✓Footprint vs recommended land pattern (p.1): 5.3 mm round copper pad (pad 1, F.Cu) around a 3.0 mm non-plated hole, centred; the 2.8 mm locating collar fits the 3.0 mm hole
  • •Paste vs stencil suggestion (p.1): the footprint draws the paste as four filled quarter-ring polygons on F.Paste (pad 1 itself has no paste layer): inner diameter 3.10, outer 5.12, webs 0.6 mm, vs Wurth's 3.1 / 5.2 / 0.6; outer ring 0.04 mm per side smaller than suggested
  • ✓3D vs drawing (p.1): body 4.35 mm diameter, z 0..1.50 vs L = 1.5 +/-0.1; locating collar 2.80 mm diameter, z -1.40..0 vs 2.8 x 1.4; shoulder seated on z = 0 with the collar in the board hole (z min -1.4 is real geometry); centred on the pad; Z-up
  • ✓DigiKey 732-7069-2-ND and Mouser 710-9774015243R kept (Wurth Elektronik, 9774015243R)
  • ✓Footprint: removed the extra pad 1 copy on B.Cu (Wurth's land pattern has the top pad only) and corrected the description to Height = 1.5mm (L = 1.5 mm, p.1)
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify 0.2.0: all checks pass
Evidencedatasheet (Wurth Elektronik, rev 001.003)
Verified files✓ 9774015243r.kicad_sym✓ 9774015243r.kicad_mod✓ 9774015243r.step
9 Oct 2026Claude (AI build)3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, ...superseded
reviewfor all variants
  • •3D pose (component-page-verify): SMT nut: the 1.5 mm locating pin goes into a board hole, so z min is -1.4 mm while the flange sits on z = 0. This is the real part geometry from the source board, kept deliberately; a person should confirm against the drawing.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓1 of 1 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 9774015243r.kicad_sym! 9774015243r.kicad_mod✓ 9774015243r.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
9774015243r / 9774015243r.lbr
HistoryDownload
Caleb Publish 0.1.1 d8d0be0 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.6.2">
<drawing>
<settings><setting alwaysvectorfont="no"/></settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<description>- Patch round nut ROHS</description>
<packages>
<package name="9774015243R">
  <description>1 pads, 5.3 x 5.3 mm. &lt;B&gt;WA-SMSI SMT Steel Spacer, M2 Thread Internal&lt;BR&gt;&lt;/B&gt;Thread Internal M2&lt;BR&gt;Height = 1.5mm</description>
  <smd name="1" x="0.0000" y="-0.0000" dx="5.3000" dy="5.3000" layer="1" roundness="100" cream="no"/>
  <wire x1="-5.3000" y1="-5.3000" x2="5.3000" y2="-5.3000" width="0.127" layer="21"/>
  <wire x1="5.3000" y1="-5.3000" x2="5.3000" y2="5.3000" width="0.127" layer="21"/>
  <wire x1="5.3000" y1="5.3000" x2="-5.3000" y2="5.3000" width="0.127" layer="21"/>
  <wire x1="-5.3000" y1="5.3000" x2="-5.3000" y2="-5.3000" width="0.127" layer="21"/>
  <text x="0" y="5.900" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
  <text x="0" y="-5.900" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
  <hole x="0.0000" y="-0.0000" drill="3"/>
</package>
</packages>
<symbols>
<symbol name="9774015243R">
  <description>- Patch round nut ROHS</description>
  <circle x="0.0000" y="0.0000" radius="2.5400" width="0.1524" layer="94"/>
  <text x="0.0000" y="3.5560" size="1.27" layer="95" align="center">&gt;NAME</text>
  <text x="0.0000" y="0.0000" size="1.27" layer="96" align="center">&gt;VALUE</text>
  <pin name="1" x="-5.08" y="0" length="short" direction="pas" visible="pad"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="9774015243R" prefix="MP">
  <description>- Patch round nut ROHS</description>
  <gates>
    <gate name="G$1" symbol="9774015243R" x="0" y="0"/>
  </gates>
  <devices>
    <device name="" package="9774015243R">
      <connects>
        <connect gate="G$1" pin="1" pad="1"/>
      </connects>
      <technologies>
        <technology name="">
          <attribute name="MPN" value="9774015243R" constant="no"/>
          <attribute name="MANUFACTURER" value="Wurth Elektronik" constant="no"/>
          <attribute name="DATASHEET" value="https://www.we-online.com/components/products/datasheet/9774015243R.pdf" constant="no"/>
          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/9774015243r" constant="no"/>
          <attribute name="MOUSER_PN" value="710-9774015243R" constant="no"/>
          <attribute name="DIGIKEY_PN" value="732-7069-2-ND" constant="no"/>
          <attribute name="LCSC_PN" value="C22431324" constant="no"/>
        </technology>
      </technologies>
    </device>
  </devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>