93LC56C-I

{
  "slug": "93lc56c-i",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech EEPROM, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "93lc56c-i",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "93lc56c-i.kicad_sym",
    "93lc56c-i.kicad_mod",
    "93lc56c-i.glb",
    "93lc56c-i.step",
    "93lc56c-i.lbr",
    "docs/hero.png",
    "docs/93lc56c-i-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "93lc56c-i-hero.glb",
    "93lc56c-i-hero.overlay.json",
    "93lc56c-i-etched.glb"
  ],
  "component": {
    "mpn": "93LC56C-I",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590218426976673792",
    "parts": {
      "symbol": "93lc56c-i.kicad_sym",
      "footprint": "93lc56c-i.kicad_mod",
      "model_3d": "93lc56c-i-hero.glb",
      "model_3d_plain": "93lc56c-i-etched.glb",
      "model_3d_step": "93lc56c-i-etched.step",
      "model_3d_step_plain": "93lc56c-i.step",
      "lbr": "93lc56c-i.lbr"
    },
    "distributor_links": {
      "lcsc": "C615409"
    },
    "distributor_check": {
      "checked_at": "2026-10-20T09:40:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "A high level selects the device and a low level deselects it and forces it into Standby mode; CS must be low for 250 ns minimum (TCSL) between consecutive instructions."
      },
      {
        "number": "2",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock: opcodes, address and data bits are clocked in on the positive edge of CLK, and data bits are clocked out on its positive edge; CLK is a don't care while CS is low."
      },
      {
        "number": "3",
        "name": "DI",
        "type": "input",
        "description": "Data In: clocks in the Start bit, opcode, address and data synchronously with the CLK input."
      },
      {
        "number": "4",
        "name": "DO",
        "type": "output",
        "description": "Data Out: outputs read data synchronously with CLK (TPD after the positive CLK edge) and provides Ready/Busy status during erase and write cycles when CS is brought high after being low for TCSL; it is High-Z when CS is held low through the cycle."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "ORG",
        "type": "input",
        "description": "Memory organization select on the 93XX56C: tied to VCC or logic HI selects x16 organization, tied to VSS or logic LO selects x8, and it must be tied to a valid logic level for proper operation (this pin is NC on A/B devices)."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on this package for the 93LC56C."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply; the 93LC56C operates from 2.5 V to 5.5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN 93LC56C-I has no package code. The SOIC-8 package was taken from the hint and matched to the; The pin table on page 12 lists pin 6 as 'ORG/NC' and pin 7 as 'NC' for the SOIC column. Pin 6 is ORG; Pin 4 (DO) is typed as 'output' because the datasheet describes it as Data Out with a High-Z state, "
        ],
        "pages_sent": 16,
        "cost_usd": 0.0543,
        "at": "2026-10-20T09:39:45"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590218426976673792",
        "pages": 36,
        "sha256": "f9a7698e3531a357",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "93lc56c-i.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "93lc56c-i-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "137e0a1f22e002a4b4096fc89a0c094f9d66c33a8465c151432566df9a936e88",
        "checked": "2026-10-20",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}