main
History Download
Ray Publish 0.1.2 9c5402d

93LC56BT-I

Microchip Tech · EEPROM · SOT-23-6

93LC56BT-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 DO tri_state Data Out returns read data synchronously with CLK (TPD after the positive CLK edge) and shows Ready/Busy status during erase/write; it is High-Z when CS is low or idle.
2 VSS power_in Ground reference for the device; all inputs and outputs are specified with respect to VSS.
3 DI input Data In clocks in the Start bit, opcode, address and data synchronously with CLK on its rising edge.
4 CLK input Serial Clock synchronizes host communication, with opcode, address and data clocked in on its positive edge, and is a don't care while CS is low.
5 CS input Chip Select: a high level selects the device and a low level deselects it into Standby, with CS low for at least 250 ns (TCSL) between consecutive instructions.
6 VCC power_in Power supply for the 93LC56B, specified from 2.5V to 5.5V, with all modes inhibited below a typical VCC of 1.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Memory
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 3
All inputs and outputs w.r.t. VSS -0.6 V w.r.t. VSS; max printed as VCC +1.0V 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 125 °C 3
ESD protection on all pins 4 kV ESD protection on all pins 3
Supply voltage VCC 2.5 5.5 V 93LC56B device range (Device Selection Table) 1
Ambient temperature (Industrial) TA -40 85 °C Industrial (I) grade 3
High-level Input Voltage VIH1 2 V VCC 2.7V 3
Low-level Input Voltage VIL1 -0.3 0.8 V VCC 2.7V 3
Low-level Output Voltage Vol1 0.4 V IOL = 2.1 mA, VCC = 4.5V 3
Low-level Output Voltage Vol2 0.2 V IOL = 100 µA, VCC = 2.5V 3
High-level Output Voltage VOH1 2.4 V IOH = -400 µA, VCC = 4.5V 3
Input Leakage Current ILI -1 1 µA VIN = VSS or VCC 3
Output Leakage Current ILO -1 1 µA VOUT = VSS or VCC 3
Pin Capacitance (all inputs/outputs) CIN, COUT 7 pF VIN/VOUT = 0V (Note 1); TA = +25°C, FCLK = 1 MHz 3
Write Current ICC write 2 mA FCLK = 3 MHz, VCC = 5.5V 3
Read Current ICC read 1 mA FCLK = 3 MHz, VCC = 5.5V 3
Read Current ICC read 500 µA FCLK = 2 MHz, VCC = 3.0V 3
Standby Current (I-Temp.) ICCS 1 µA I-Temp.; CLK = CS = 0V; ORG = DI = VSS or VCC (Note 2 and Note 3) 3
Clock Frequency FCLK 2 MHz 2.5V VCC < 5.5V 4
Clock High Time TCKH 250 ns 2.5V VCC < 5.5V 4
Clock Low Time TCKL 200 ns 2.5V VCC < 5.5V 4
Chip Select Setup Time TCSS 100 ns 2.5V VCC < 4.5V 4
Chip Select Setup Time TCSS 50 ns 4.5V VCC < 5.5V 4
Chip Select Hold Time TCSH 0 ns 1.8V VCC < 5.5V 4
Chip Select Low Time TCSL 250 ns 1.8V VCC < 5.5V 4
Data Input Setup Time TDIS 100 ns 2.5V VCC < 5.5V 4
Data Input Hold Time TDIH 100 ns 2.5V VCC < 5.5V 4
Data Output Delay Time TPD 250 ns 2.5V VCC < 4.5V, CL = 100 pF 4
Data Output Delay Time TPD 200 ns 4.5V VCC < 5.5V, CL = 100 pF 4
Data Output Disable Time TCZ 200 ns 1.8V VCC < 4.5V, (Note 1) 4
Data Output Disable Time TCZ 100 ns 4.5V VCC < 5.5V, (Note 1) 4
Status Valid Time TSV 300 ns 2.5V VCC < 4.5V, CL = 100 pF 4
Status Valid Time TSV 200 ns 4.5V VCC < 5.5V, CL = 100 pF 4
Program Cycle Time TWC 6 ms Erase/Write mode (AA and LC versions) 5
ERAL Cycle Time TEC 6 ms ERAL mode, 4.5V VCC 5.5V 5
WRAL Cycle Time TWL 15 ms WRAL mode, 4.5V VCC 5.5V 5
Endurance 1 M cycles +25°C, VCC = 5.0V (Note 2) 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Part Number VCC Range ORG Pin Word Size Temperature Ranges Packages 93AA56A 1.8V-5.5V No 8-bit I MC, MS, P, SN, OT, MN, ST 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: 93LC56BT-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: 93lc56bt-i-ot-etched.step / 93lc56bt-i-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 93lc56bt-i-ot.step / 93lc56bt-i-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (42 pp, sha256 7df346598452af5a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF