# 93C46B

**Microchip Tech** · Pre-ordered Chips · SOIC-8

93C46B from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select: a high level selects the device and a low level deselects it into Standby mode, and CS must be low for 250 ns minimum (TCSL) between consecutive instructions. |
| 2 | CLK | input | Serial Clock synchronizes communication, with opcodes, address and data clocked in and read data clocked out on the positive edge of CLK, and CLK is a don't care when CS is low. |
| 3 | DI | input | Data In clocks in the Start bit, opcode, address and data synchronously with the CLK input. |
| 4 | DO | output | Data Out outputs read data synchronously with CLK (TPD after the positive edge of CLK) and also provides Ready/Busy status during erase and write cycles when CS is brought high after TCSL. |
| 5 | VSS | power_in | Ground reference pin for the device. |
| 6 | ORG/NC | unconnected | The ORG pin is NC on A/B devices, and 93XX46B devices are always x16 organization, so this pin has no internal connection on the 93C46B. |
| 7 | NC | unconnected | No internal connection. |
| 8 | VCC | power_in | Power supply pin; the 93C46B operates at VCC 4.5-5.5 V per the device selection table. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level input voltage | VIH1 | 2 |  |  | V | VCC 2.7V | 3 |
| Low-level input voltage | VIL1 | -0.3 |  | 0.8 | V | VCC 2.7V | 3 |
| Low-level output voltage | VOL1 |  |  | 0.4 | V | IOL = 2.1 mA, VCC = 4.5V | 3 |
| High-level output voltage | VOH1 | 2.4 |  |  | V | IOH = -400 µA, VCC = 4.5V | 3 |
| Input leakage current | ILI | -1 |  | 1 | µA | VIN = VSS or VCC | 3 |
| Output leakage current | ILO | -1 |  | 1 | µA | VOUT = VSS or VCC | 3 |
| Pin capacitance (all inputs/outputs) | CIN, COUT |  |  | 7 | pF | VIN/VOUT = 0V (Note 1); TA = 25°C, FCLK = 1 MHz | 3 |
| Write current | ICC write |  |  | 500 | mA | FCLK = 3 MHz, VCC = 5.5V | 3 |
| Read current | ICC read |  |  | 100 | mA | FCLK = 3 MHz, VCC = 5.5V | 3 |
| Standby current (I-Temp) | ICCS |  |  | 1 | µA | I-Temp; CLK = CS = 0V; ORG = DI = VSS or VCC (Note 2) (Note 3) | 3 |
| Standby current (E-Temp) | ICCS |  |  | 5 | µA | E-Temp; CLK = CS = 0V; ORG = DI = VSS or VCC (Note 2) (Note 3) | 3 |
| VCC voltage detect | VPOR | 1.5 |  | 3.8 | V | (Note 1) | 3 |
| Clock frequency | FCLK |  |  | 2 | MHz | 2.5V VCC 5.5V | 4 |
| Clock high time | TCKH | 250 |  |  | ns | 2.5V VCC 5.5V | 4 |
| Clock low time | TCKL | 200 |  |  | ns | 2.5V VCC 5.5V | 4 |
| Chip Select setup time | TCSS | 50 |  |  | ns | 4.5V VCC 5.5V | 4 |
| Chip Select hold time | TCSH | 0 |  |  | ns | 1.8V VCC 5.5V | 4 |
| Chip Select low time | TCSL | 250 |  |  | ns | 1.8V VCC 5.5V | 4 |
| Data input setup time | TDIS | 100 |  |  | ns | 2.5V VCC 5.5V | 4 |
| Data input hold time | TDIH | 100 |  |  | ns | 2.5V VCC 5.5V | 4 |
| Data output delay time | TPD |  |  | 200 | ns | 4.5V VCC 5.5V, CL = 100 pF | 4 |
| Data output disable time | TCZ |  |  | 100 | ns | 4.5V VCC 5.5V, (Note 1) | 4 |
| Status valid time | TSV |  |  | 200 | ns | 4.5V VCC 5.5V, CL = 100 pF | 4 |
| Program cycle time (93C versions) | TWC |  |  | 2 | ms | Erase/Write mode (93C versions) | 4 |
| ERAL mode time | TEC |  |  | 6 | ms | ERAL mode, 4.5V VCC 5.5V | 4 |
| WRAL mode time | TWL |  |  | 15 | ms | WRAL mode, 4.5V VCC 5.5V | 4 |
| Clock frequency range (device supply) | VCC | 4.5 |  | 5.5 | V | 93C46B device selection table | 1 |
| Ambient temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial (I) | 3 |
| Ambient temperature (Automotive) | TA | -40 |  | 125 | °C | Automotive (E) | 3 |
| VCC supply voltage | VCC |  |  | 7 | V |  | 3 |
| Voltage on all inputs and outputs w.r.t. VSS |  | -0.6 |  |  | V | up to VCC +1.0V | 3 |
| Storage temperature |  | -65 |  | 150 | °C |  | 3 |
| Ambient temperature with power applied |  | -40 |  | 125 | °C |  | 3 |
| ESD protection on all pins |  |  |  | 4 | kV | ESD protection on all pins | 3 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | 2x3 DFN/TDFN and 8-lead TSSOP. All packages are Pb-free (Matte Tin) finish. | 1 |

## CAD (KiCad official)

- Symbol: `93C46B`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `93c46b-etched.step` / `93c46b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `93c46b.step` / `93c46b.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Microchip Tech datasheet](docs/93c46b-datasheet.pdf) (38 pp, sha256 `585657b44209872a`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/93c46b-datasheet.pdf)