93AA46

{
  "schema_version": 1,
  "type": "component",
  "slug": "93aa46",
  "title": "93AA46",
  "brief": "Microchip Tech Pre-ordered MCUs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "single chip microcomputer-microcontroller",
    "93aa46",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "93AA46",
    "manufacturer": "Microchip Tech",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Single Chip Microcomputer/Microcontroller",
    "subcategory": "Pre-ordered MCUs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/57feb1e901fad4d645b41f603d6484ba.pdf",
    "parts": {
      "symbol": "93aa46.kicad_sym",
      "footprint": "93aa46.kicad_mod",
      "model_3d": "93aa46-hero.glb",
      "model_3d_plain": "93aa46-etched.glb",
      "model_3d_step": "93aa46-etched.step",
      "model_3d_step_plain": "93aa46.step",
      "lbr": "93aa46.lbr"
    },
    "distributor_links": {
      "lcsc": "C615326"
    },
    "distributor_check": {
      "checked_at": "2026-10-27T01:35:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip Select: a high level selects the device, a low level deselects it into Standby mode, and CS must be low for at least 250 ns (TCSL) between consecutive instructions."
      },
      {
        "number": "2",
        "name": "CLK",
        "type": "input",
        "description": "Serial Clock: synchronizes communication, with opcode, address and data bits clocked in and out on the positive edge, at up to 2 MHz for VCC ≥ 4.5V and 1 MHz for VCC < 4.5V."
      },
      {
        "number": "3",
        "name": "DI",
        "type": "input",
        "description": "Serial Data Input: used to clock in the Start bit, opcode, address and data synchronously with CLK."
      },
      {
        "number": "4",
        "name": "DO",
        "type": "tri_state",
        "description": "Serial Data Output: outputs read data synchronously with CLK and provides Ready/Busy status during erase/write cycles, otherwise High-Z (a pull-up resistor is needed to read Ready if status is checked after the cycle)."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "6",
        "name": "ORG",
        "type": "input",
        "description": "Memory Configuration: tied to VCC selects x16 organization, tied to VSS selects x8, and it may be floated only for x16 at clock speeds of 1 MHz or less."
      },
      {
        "number": "7",
        "name": "NU",
        "type": "unconnected",
        "description": "Not Utilized."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, operating from 1.8V to 5.5V (absolute maximum 7.0V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package pin diagram on page 1 is garbled in the extracted text. Pin numbers 5-8 (VSS, ORG, NU, V; The datasheet pin table gives only the names and functions, not the electrical types. The types are "
        ],
        "pages_sent": 22,
        "cost_usd": 0.1749,
        "at": "2026-10-27T01:35:06"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/57feb1e901fad4d645b41f603d6484ba.pdf",
        "pages": 22,
        "sha256": "9e8124bb7fb7343d",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "93aa46.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "93aa46-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2691b50192fac55d9d0ab4cd88a55d6b418c4c37e7935e92b9242f6ac70b1348",
        "checked": "2026-10-27",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "SOIC-8",
      "Category": "Single Chip Microcomputer/Microcontroller",
      "Pins": "8"
    },
    "appearance": {
      "contacts": {
        "quote": "mount SOIC packages. The rotated pin-out 93AA46X/ 56X/66X are offered in the “SN” package only.",
        "page": 1,
        "doc": "ds.pdf",
        "plating": "tin"
      },
      "version": 1,
      "datasheet_sha256": "9e8124bb7fb7343d51ac0ea7a4825f5fc3150e7105b9d4bb9a05f066d477e2ae"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "9e8124bb7fb7343d51ac0ea7a4825f5fc3150e7105b9d4bb9a05f066d477e2ae",
      "rows": [
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Commercial operating temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": 0,
          "typ": null,
          "max": 70,
          "conditions": "Commercial (C)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Industrial operating temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Industrial (I)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Inputs and outputs voltage minimum",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": null,
          "conditions": "w.r.t. VSS; upper limit VCC +1.0V",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature with power applied",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Soldering temperature of leads",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "10 seconds",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "ESD protection on all pins",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "High-level input voltage",
          "symbol": "VIH1",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": null,
          "conditions": "VCC ≥ 2.7V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Low-level input voltage",
          "symbol": "VIL1",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 0.8,
          "conditions": "VCC ≥ 2.7V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Low-level input voltage",
          "symbol": "VIL2",
          "kind": "electrical",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "VCC < 2.7V; max 0.2 VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Low-level output voltage",
          "symbol": "VOL1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 2.1 mA; VCC = 4.5V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Low-level output voltage",
          "symbol": "VOL2",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.2,
          "conditions": "IOL = 100µA; VCC = 1.8V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage",
          "symbol": "VOH1",
          "kind": "electrical",
          "unit": "V",
          "min": 2.4,
          "typ": null,
          "max": null,
          "conditions": "IOH = -400 µA; VCC = 4.5V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current",
          "symbol": "ILI",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "VIN = 0.1V to VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Output leakage current",
          "symbol": "ILO",
          "kind": "electrical",
          "unit": "µA",
          "min": -10,
          "typ": null,
          "max": 10,
          "conditions": "VOUT = 0.1V to VCC",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Pin capacitance (all inputs/outputs)",
          "symbol": "CIN, COUT",
          "kind": "electrical",
          "unit": "pF",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "VIN/VOUT = 0V (Note 1 & 2); TA = +25°C, FCLK = 1 MHz",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating current, write",
          "symbol": "ICC write",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "FCLK = 2 MHz; VCC=5.5V (Note 2)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating current, read",
          "symbol": "ICC read",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 70,
          "max": null,
          "conditions": "FCLK = 1 MHz; VCC = 1.8V",
          "source_page": 1,
          "source": "datasheet"
        },
        {
          "name": "Clock high time",
          "symbol": "TCKH",
          "kind": "timing",
          "unit": "ns",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Clock low time",
          "symbol": "TCKL",
          "kind": "timing",
          "unit": "ns",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Chip select setup time",
          "symbol": "TCSS",
          "kind": "timing",
          "unit": "ns",
          "min": 50,
          "typ": null,
          "max": null,
          "conditions": "Relative to CLK",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Chip select hold time",
          "symbol": "TCSH",
          "kind": "timing",
          "unit": "ns",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "Relative to CLK",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Chip select low time",
          "symbol": "TCSL",
          "kind": "timing",
          "unit": "ns",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Data input setup time",
          "symbol": "TDIS",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "Relative to CLK",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Data input hold time",
          "symbol": "TDIH",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "Relative to CLK",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Data output delay time",
          "symbol": "TPD",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 400,
          "conditions": "CL = 100 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Data output disable time",
          "symbol": "TCZ",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "CL = 100 pF (Note 2)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Status valid time",
          "symbol": "TSV",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 500,
          "conditions": "CL = 100 pF",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Program cycle time, erase/write",
          "symbol": "TWC",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 4,
          "max": 10,
          "conditions": "Erase/Write mode",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Program cycle time, ERAL",
          "symbol": "TEC",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 8,
          "max": 15,
          "conditions": "ERAL mode (Vcc = 5V ± 10%)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Program cycle time, WRAL",
          "symbol": "TWL",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 16,
          "max": 30,
          "conditions": "WRAL mode (Vcc = 5V ± 10%)",
          "source_page": 3,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "93aa46"
  ],
  "discovery_pitch": "93AA46 (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "93aa46.kicad_sym",
    "93aa46.kicad_mod",
    "93aa46.glb",
    "93aa46.step",
    "93aa46.lbr",
    "docs/hero.png",
    "docs/93aa46-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "93aa46-hero.glb",
    "93aa46-hero.overlay.json",
    "93aa46-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}