component

925-126J-51P

Public Made by Adom

by adom

Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards.

componentconnectors925-126j-51pboard-derived

Verified 925-126J-51P

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Amphenol RF customer outline drawing 925-126J-51P Rev A; footprint and 3D rebuilt to itfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: Amphenol RF customer outline drawing 925-126J-51P Rev A (03-Jun-16, ECO 00941), the file the product page https://www.amphenolrf.com/en-us/part/925-126j-51p/4449/ links today (asset 4065789372, fetched 2026-10-27, sha256 d0f7d88e2577de06). Amphenol's file is vector art with no text layer; the attached copy is that file with an invisible OCR text layer (ocrmypdf 15.2), renders pixel-identical. Replaces the page's 400 dpi raster + OCR copy
  • ✓BOM: rf-molecules rf-scaffold-module J3, J4 (BOM 'Conn_Coaxial_Small,J3/J4,925-126j-51p', footprint coax:925-126j-51p): the intended part is this page's MPN
  • ✓Pins: 1 CONTACT = centre contact, 2 BODY = body (names from the drawing's materials list; the drawing has no pin table); both passive; descriptions rewritten from the drawing, cited p.1
  • ✓Footprint rebuilt to the RECOMMENDED PCB LAYOUT, x = 0 on the board edge: Edge.Cuts slot 3.60 (3.6 +-0.05) wide x 5.03 deep (was 3.40 x 5.00, zero clearance to the 3.4 REF body); outer pads 0..8.12 from the edge, outer edges 4.92 apart, inner edges 3.60 apart over the slot and 2.08 apart from 5.03 to 8.12 (each an L of two rectangles numbered 2, so EAGLE/Fusion keep the full copper); centre pad 0.97 wide from 5.03 to 8.28 (was 5.10..8.35: every copper edge had been 0.07 further from the edge than drawn)
  • ✓3D: Amphenol RF's STP download (asset 4066964497) redirects to the myAmphenol login and the site has no redistribution licence; KiCad has no SMPM model; model built by Adom from the drawing (tier 3, CC-BY-SA-4.0, builder provenance/tools/build_925-126j-51p.py): 7.95 REF to the tab ends, contact to 8.11, 4.47 wide, z -1.40..2.11 (3.51 REF, 2.11 REF), 3.4 REF below the board with 0.32 chamfers, tabs 0.58 thick on z = 0, contact 0.71 dia on the axis 0.36 above the mounting plane; bore depth and pin tip position are not dimensioned (display assumptions, in provenance/3d-model.json)
  • ✓Pose (step_pose.py, both STEPs): Z-up, identity binding, centre 0.085 mm from the pad-pattern centre, seated on z = 0 on the pads with the body 1.40 mm below the board through the Edge.Cuts slot, as the drawing requires; MPN etched on the top flat (adom-chip-laser)
  • ✓DigiKey ARF2549-ND and Mouser 523-925-126J-51P (Amphenol RF 925-126J-51P), confirmed by part lookup 2026-10-27
  • •Boards to update (Caleb): rf-scaffold-module J3, J4 still carry the 3.40 x 5.00 slot and the 0.07 mm copper offset, and their 3D model reference is 925-169J-51PT_SMPM_Coax.step (another part)
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Amphenol RF)product page
Verified files✓ 925-126j-51p.kicad_sym✓ 925-126j-51p.kicad_mod✓ 925-126j-51p.step
9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded
reviewfor all variants
  • •Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.
9 Oct 2026Claude (AI build)On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and v...superseded
reviewfor all variants
  • •On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and vice versa (swapped). This page uses the geometry placed for this reference designator; confirm it matches the Amphenol 925-126J-51P drawing.
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 925-126j-51p.kicad_sym! 925-126j-51p.kicad_mod! 925-126j-51p.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
925-126j-51p / 925-126j-51p.kicad_mod
HistoryDownload
Caleb Publish 0.1.1 6d0dee9 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203
(footprint "925-126j-51p"
	(layer "F.Cu")
	(descr "Amphenol RF 925-126J-51P SMPM jack, full detent, edge mount; land pattern and board slot per the RECOMMENDED PCB LAYOUT of customer outline drawing 925-126J-51P Rev A (x = 0 is the board edge)")
	(tags "SMPM edge mount coaxial Amphenol RF 925-126J-51P")
	(property "Reference" "REF**"
		(at 4.06 -3.6)
		(unlocked yes)
		(layer "F.SilkS")
		(uuid "9055c63d-28b6-4ec9-adf6-9ba99badd243")
		(effects
			(font (size 1.0 1.0) (thickness 0.15))
		)
	)
	(property "Value" "925-126j-51p"
		(at 4.06 3.6)
		(unlocked yes)
		(layer "F.Fab")
		(uuid "88488edb-44da-468f-bf4b-97d3e3de8567")
		(effects
			(font (size 1.0 1.0) (thickness 0.15))
		)
	)
	(property "Datasheet" "https://www.amphenolrf.com/en-us/assets/file/4065789372/"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "364ea61f-3d70-4ba7-8393-a41b97895158")
		(effects
			(font (size 1.0 1.0) (thickness 0.15))
		)
	)
	(property "Description" "SMPM jack, full detent, edge mount (Amphenol RF 925-126J-51P)"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "325789b7-05ff-40f2-893f-0c9350b312e2")
		(effects
			(font (size 1.0 1.0) (thickness 0.15))
		)
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start 0 -1.8)
		(end 5.03 -1.8)
		(stroke (width 0.05) (type default))
		(layer "Edge.Cuts")
		(uuid "2ebf7d7d-cc81-4697-ad22-76e7a41e8c3f")
	)
	(fp_line
		(start 5.03 -1.8)
		(end 5.03 1.8)
		(stroke (width 0.05) (type default))
		(layer "Edge.Cuts")
		(uuid "eb3968a0-80ff-4641-88f8-ec9bb286d82c")
	)
	(fp_line
		(start 5.03 1.8)
		(end 0 1.8)
		(stroke (width 0.05) (type default))
		(layer "Edge.Cuts")
		(uuid "6f4bc2d0-4b46-4a59-bbd7-24b5b3148e20")
	)
	(fp_line
		(start 0 -1.8)
		(end 0 -2.7)
		(stroke (width 0.05) (type default))
		(layer "Edge.Cuts")
		(uuid "41ccb779-a56a-434d-b2d9-f89253c06de5")
	)
	(fp_line
		(start 0 1.8)
		(end 0 2.7)
		(stroke (width 0.05) (type default))
		(layer "Edge.Cuts")
		(uuid "5a0e3a51-d922-476e-969c-d94d60af5137")
	)
	(fp_line
		(start 0 -2.235)
		(end 7.95 -2.235)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "02938584-31ef-41cc-b92f-a7304addefd0")
	)
	(fp_line
		(start 7.95 -2.235)
		(end 7.95 2.235)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "f583900c-b112-4ac4-9e1b-3ed58f5d907a")
	)
	(fp_line
		(start 7.95 2.235)
		(end 0 2.235)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "92b44eb9-fe2c-494e-850d-57b4189424dc")
	)
	(fp_line
		(start 0 2.235)
		(end 0 -2.235)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "753436db-fe85-4a71-80de-3f702da5c751")
	)
	(fp_line
		(start 7.95 -0.355)
		(end 8.11 -0.355)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "d72e7fa4-1f3e-4a33-b3fd-6853f20a5043")
	)
	(fp_line
		(start 8.11 -0.355)
		(end 8.11 0.355)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "386500d8-065b-48ab-8324-169690cf46fa")
	)
	(fp_line
		(start 8.11 0.355)
		(end 7.95 0.355)
		(stroke (width 0.1) (type default))
		(layer "F.Fab")
		(uuid "c928157c-a98b-41c5-9c0d-25bca2d4039c")
	)
	(fp_text user "${REFERENCE}"
		(at 2.5 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(uuid "4121a7ba-296e-4058-93a7-5b16fc796311")
		(effects
			(font (size 0.6 0.6) (thickness 0.09))
		)
	)
	(fp_line
		(start 0 -2.66)
		(end 8.48 -2.66)
		(stroke (width 0.12) (type default))
		(layer "F.SilkS")
		(uuid "58e7d249-705e-4b74-98a0-b5545d52ab5d")
	)
	(fp_line
		(start 8.48 -2.66)
		(end 8.48 2.66)
		(stroke (width 0.12) (type default))
		(layer "F.SilkS")
		(uuid "d42906c4-870c-4095-84b1-f5f8a3adcd1e")
	)
	(fp_line
		(start 8.48 2.66)
		(end 0 2.66)
		(stroke (width 0.12) (type default))
		(layer "F.SilkS")
		(uuid "1a23c957-eb2e-4b54-94a3-e18a4b091fac")
	)
	(fp_rect
		(start -0.25 -2.71)
		(end 8.53 2.71)
		(stroke (width 0.05) (type default))
		(fill no)
		(layer "F.CrtYd")
		(uuid "2cc1cece-1aad-4076-8a75-9c86b98ebcea")
	)
	(pad "1" smd rect
		(at 6.655 0.0)
		(size 3.25 0.97)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "7967faa4-bb92-4211-8284-404dca1565d2")
	)
	(pad "2" smd rect
		(at 4.06 -2.13)
		(size 8.12 0.66)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "5fef2f79-5add-4728-8136-7306d3418860")
	)
	(pad "2" smd rect
		(at 6.575 -1.47)
		(size 3.09 0.86)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "80f9d4dd-d4b7-43e8-9bde-479ff9e975d1")
	)
	(pad "2" smd rect
		(at 4.06 2.13)
		(size 8.12 0.66)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "591e9bb5-1ad0-4477-8509-8e5a5ff6165d")
	)
	(pad "2" smd rect
		(at 6.575 1.47)
		(size 3.09 0.86)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(uuid "e4e2c951-6f33-47e6-9035-0c1bb031f237")
	)
	(embedded_fonts no)
	(model "${KIPRJMOD}/925-126j-51p.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)