component

925-126J-51P

Public Made by Adom

by adom

Amphenol RF RF Coaxial Connectors (SMPM jack), 925-126j-51p. KiCad symbol, footprint and 3D as used on Adom boards.

Verified 925-126J-51P

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match

SymbolFootprint3D modelPins

Verification log 4 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Amphenol RF customer outline drawing 925-126J-51P Rev A; footprint and 3D rebuilt to itfiles match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: Amphenol RF customer outline drawing 925-126J-51P Rev A (03-Jun-16, ECO 00941), the file the product page https://www.amphenolrf.com/en-us/part/925-126j-51p/4449/ links today (asset 4065789372, fetched 2026-10-27, sha256 d0f7d88e2577de06). Amphenol's file is vector art with no text layer; the attached copy is that file with an invisible OCR text layer (ocrmypdf 15.2), renders pixel-identical. Replaces the page's 400 dpi raster + OCR copy
✓BOM: rf-molecules rf-scaffold-module J3, J4 (BOM 'Conn_Coaxial_Small,J3/J4,925-126j-51p', footprint coax:925-126j-51p): the intended part is this page's MPN
✓Pins: 1 CONTACT = centre contact, 2 BODY = body (names from the drawing's materials list; the drawing has no pin table); both passive; descriptions rewritten from the drawing, cited p.1
✓Footprint rebuilt to the RECOMMENDED PCB LAYOUT, x = 0 on the board edge: Edge.Cuts slot 3.60 (3.6 +-0.05) wide x 5.03 deep (was 3.40 x 5.00, zero clearance to the 3.4 REF body); outer pads 0..8.12 from the edge, outer edges 4.92 apart, inner edges 3.60 apart over the slot and 2.08 apart from 5.03 to 8.12 (each an L of two rectangles numbered 2, so EAGLE/Fusion keep the full copper); centre pad 0.97 wide from 5.03 to 8.28 (was 5.10..8.35: every copper edge had been 0.07 further from the edge than drawn)
✓3D: Amphenol RF's STP download (asset 4066964497) redirects to the myAmphenol login and the site has no redistribution licence; KiCad has no SMPM model; model built by Adom from the drawing (tier 3, CC-BY-SA-4.0, builder provenance/tools/build_925-126j-51p.py): 7.95 REF to the tab ends, contact to 8.11, 4.47 wide, z -1.40..2.11 (3.51 REF, 2.11 REF), 3.4 REF below the board with 0.32 chamfers, tabs 0.58 thick on z = 0, contact 0.71 dia on the axis 0.36 above the mounting plane; bore depth and pin tip position are not dimensioned (display assumptions, in provenance/3d-model.json)
✓Pose (step_pose.py, both STEPs): Z-up, identity binding, centre 0.085 mm from the pad-pattern centre, seated on z = 0 on the pads with the body 1.40 mm below the board through the Edge.Cuts slot, as the drawing requires; MPN etched on the top flat (adom-chip-laser)
✓DigiKey ARF2549-ND and Mouser 523-925-126J-51P (Amphenol RF 925-126J-51P), confirmed by part lookup 2026-10-27
•Boards to update (Caleb): rf-scaffold-module J3, J4 still carry the 3.40 x 5.00 slot and the 0.07 mm copper offset, and their 3D model reference is 925-169J-51PT_SMPM_Coax.step (another part)
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify: all checks pass

Evidencedatasheet (Amphenol RF)product page

Verified files✓ 925-126j-51p.kicad_sym✓ 925-126j-51p.kicad_mod✓ 925-126j-51p.step

9 Oct 2026Claude (AI build)Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...superseded

reviewfor all variants

•Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.

9 Oct 2026Claude (AI build)On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and v...superseded

reviewfor all variants

•On the source board the 925-126J-51P footprint references the 925-169J-51PT 3D model and vice versa (swapped). This page uses the geometry placed for this reference designator; confirm it matches the Amphenol 925-126J-51P drawing.

9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓2 of 2 pins described
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! 925-126j-51p.kicad_sym! 925-126j-51p.kicad_mod! 925-126j-51p.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

Releases

No downloadable binaries. This is an installable package: grab it from the Packages tab with adom-wiki pkg install adom/925-126j-51p. Publishers attach per-platform binaries with adom-wiki release upload.

Compare →