component
74LVC1G11W6-7
Public Made by Adomby adom
Diodes Incorporated Gates, SOT-26. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
Contents
README
markdown74LVC1G11W6-7
Diodes Incorporated · Gates · SOT-26
74LVC1G11W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A | input | Data input A of the 3-input AND gate. CMOS input, 5.5V tolerant regardless of VCC. Unused inputs should be tied to VCC or GND. |
| 2 | GND | power_in | Ground reference (0 V) for the device. |
| 3 | B | input | Data input B of the 3-input AND gate. CMOS input, 5.5V tolerant regardless of VCC. Unused inputs should be tied to VCC or GND. |
| 4 | Y | output | Data output Y = A · B · C. Push-pull CMOS output; ±24 mA drive at VCC = 3V. IOFF circuitry disables the output during partial-power-down. |
| 5 | VCC | power_in | Supply voltage input, 1.65V to 5.5V operating range (1.5V minimum for data retention). Decouple with a local ceramic capacitor to GND. |
| 6 | C | input | Data input C of the 3-input AND gate. CMOS input, 5.5V tolerant regardless of VCC. Unused inputs should be tied to VCC or GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | Logic |
| Pins | 6 |
Ordering variants
74LVC1G11W6-7
CAD (KiCad official)
- Symbol:
74LVC1G11W6-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files:
74lvc1g11w6-7-etched.step/74lvc1g11w6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lvc1g11w6-7.step/74lvc1g11w6-7.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
74lvc1g11w6-7.step |
97 KB | You want the bare part, or you mark your own boards. |
74lvc1g11w6-7-etched.step |
1.7 MB | You want the part with 74LVC1G11W6-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 455 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (12 pp, sha256
f80971eb32dfb18a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).