main
Ray
Publish 0.2.0
6761368
74LCX573FT
TOSHIBA · Latches · TSSOP-20
74LCX573FT from TOSHIBA, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; when HIGH all Q outputs are forced to high-impedance state; 5-V tolerant, VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 2 | D0 | input | Data input bit 0; 5-V tolerant; latched to Q0 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 3 | D1 | input | Data input bit 1; 5-V tolerant; latched to Q1 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 4 | D2 | input | Data input bit 2; 5-V tolerant; latched to Q2 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 5 | D3 | input | Data input bit 3; 5-V tolerant; latched to Q3 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 6 | D4 | input | Data input bit 4; 5-V tolerant; latched to Q4 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 7 | D5 | input | Data input bit 5; 5-V tolerant; latched to Q5 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 8 | D6 | input | Data input bit 6; 5-V tolerant; latched to Q6 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 9 | D7 | input | Data input bit 7; 5-V tolerant; latched to Q7 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 10 | GND | power_in | Ground reference; VCC/GND absolute maximum current ±100 mA. |
| 11 | LE | input | Latch enable; Q outputs track D inputs while HIGH, latch data on falling edge; minimum HIGH pulse width tw(H) = 3.3 ns (VCC = 3.3 V). |
| 12 | Q7 | tri_state | 3-state latch output bit 7; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 13 | Q6 | tri_state | 3-state latch output bit 6; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 14 | Q5 | tri_state | 3-state latch output bit 5; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 15 | Q4 | tri_state | 3-state latch output bit 4; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 16 | Q3 | tri_state | 3-state latch output bit 3; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 17 | Q2 | tri_state | 3-state latch output bit 2; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 18 | Q1 | tri_state | 3-state latch output bit 1; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 19 | Q0 | tri_state | 3-state latch output bit 0; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 20 | VCC | power_in | Positive supply voltage; operating range 1.65 to 3.6 V; absolute maximum 6.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | 6.5 | V | 4 | ||
| Input voltage (absolute maximum) | VIN | -0.5 | 6.5 | V | 4 | ||
| Output voltage (absolute maximum) | VOUT | -0.5 | 6.5 | V | Output in OFF state | 4 | |
| Input diode current (absolute maximum) | IIK | -50 | mA | 4 | |||
| Output diode current (absolute maximum) | IOK | -50 | 50 | mA | VOUT < GND, VOUT > VCC | 4 | |
| Output current (absolute maximum) | IOUT | -50 | 50 | mA | High or low state; IOUT absolute maximum must be observed | 4 | |
| Power dissipation (absolute maximum) | PD | 180 | mW | 4 | |||
| VCC/ground current (absolute maximum) | ICC/IGND | -100 | 100 | mA | 4 | ||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage (operating range) | VCC | 1.65 | 3.6 | V | Data retention only applies to the low end (Note 1) | 4 | |
| Output current IOH/IOL (operating range) | IOH,IOL | -24 | 24 | mA | VCC = 3.0 to 3.6 V | 4 | |
| Output current IOH/IOL (operating range) | IOH,IOL | -12 | 12 | mA | VCC = 2.7 to 3.0 V | 4 | |
| Operating temperature | Topr | -40 | 85 | °C | 4 | ||
| High-level input voltage | VIH | 1.7 | V | VCC = 2.3 to 2.7 V | 5 | ||
| High-level input voltage | VIH | 2 | V | VCC = 2.7 to 3.6 V | 5 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3 to 2.7 V | 5 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 2.7 to 3.6 V | 5 | ||
| High-level output voltage | VOH | 1.05 | V | VIN = VIH or VIL, IOH = -4 mA; VCC = 1.65 V | 5 | ||
| High-level output voltage | VOH | 1.7 | V | VIN = VIH or VIL, IOH = -8 mA; VCC = 2.3 V | 5 | ||
| High-level output voltage | VOH | 2.2 | V | VIN = VIH or VIL, IOH = -12 mA; VCC = 2.7 V | 5 | ||
| High-level output voltage | VOH | 2.4 | V | VIN = VIH or VIL, IOH = -18 mA; VCC = 3.0 V | 5 | ||
| Low-level output voltage | VOL | 0.2 | V | VIN = VIH or VIL, IOL = 100 µA; VCC = 1.65 to 3.6 V | 5 | ||
| Low-level output voltage | VOL | 0.45 | V | VIN = VIH or VIL, IOL = 4 mA; VCC = 1.65 V | 5 | ||
| Low-level output voltage | VOL | 0.7 | V | VIN = VIH or VIL, IOL = 8 mA; VCC = 2.3 V | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | VIN = VIH or VIL, IOL = 12 mA; VCC = 2.7 V | 5 | ||
| Low-level output voltage | VOL | 0.55 | V | VIN = VIH or VIL, IOL = 24 mA; VCC = 3.0 V | 5 | ||
| Input leakage current | IIN | -5 | 5 | µA | VIN = 0 to 5.5 V; VCC = 1.65 to 3.6 V | 5 | |
| 3-state output OFF-state leakage current | IOZ | -5 | 5 | µA | VIN = VIH or VIL, VOUT = 0 to 5.5 V; VCC = 1.65 to 3.6 V | 5 | |
| Power-OFF leakage current | IOFF | -10 | 10 | µA | VIN/VOUT = 5.5 V; VCC = 0 | 5 | |
| Quiescent supply current | ICC | 10 | µA | VIN = VCC or GND; VCC = 1.65 to 3.6 V | 5 | ||
| Quiescent supply current (per input) | ΔICC | 500 | µA | VIN/VOUT = 3.6 to 5.5 V; VIH = VCC - 0.6 V (per input); VCC = 2.7 to 3.6 V | 5 | ||
| Propagation delay time (D-Q) | tPLH,tPHL | 30 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (D-Q) | tPLH,tPHL | 10 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (D-Q) | tPLH,tPHL | 9 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (D-Q) | tPLH,tPHL | 1.5 | 8 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 | |
| Propagation delay time (LE-Q) | tPLH,tPHL | 30 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (LE-Q) | tPLH,tPHL | 10.5 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (LE-Q) | tPLH,tPHL | 9.5 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Propagation delay time (LE-Q) | tPLH,tPHL | 1.5 | 8.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 | |
| Output enable time | tPZL,tPZH | 34 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output enable time | tPZL,tPZH | 17 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output enable time | tPZL,tPZH | 9.5 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output enable time | tPZL,tPZH | 1.5 | 8.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 | |
| Output disable time | tPLZ,tPHZ | 28 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output disable time | tPLZ,tPHZ | 14 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output disable time | tPLZ,tPHZ | 7 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Output disable time | tPLZ,tPHZ | 1.5 | 6.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 | |
| Minimum pulse width (LE) | tw(H) | 10 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Minimum setup time | tS | 10 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Minimum setup time | tS | 5 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Minimum setup time | tS | 2.5 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 | ||
| Minimum hold time | th | 1.5 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
CAD (KiCad official)
- Symbol:
74LCX573FT - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
74lcx573ft-etched.step/74lcx573ft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);74lcx573ft.step/74lcx573ft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (10 pp, sha256
6ae4872c9b7d0076, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# 74LCX573FT
**TOSHIBA** · Latches · TSSOP-20
74LCX573FT from TOSHIBA, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output enable; when HIGH all Q outputs are forced to high-impedance state; 5-V tolerant, VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 2 | D0 | input | Data input bit 0; 5-V tolerant; latched to Q0 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 3 | D1 | input | Data input bit 1; 5-V tolerant; latched to Q1 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 4 | D2 | input | Data input bit 2; 5-V tolerant; latched to Q2 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 5 | D3 | input | Data input bit 3; 5-V tolerant; latched to Q3 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 6 | D4 | input | Data input bit 4; 5-V tolerant; latched to Q4 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 7 | D5 | input | Data input bit 5; 5-V tolerant; latched to Q5 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 8 | D6 | input | Data input bit 6; 5-V tolerant; latched to Q6 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 9 | D7 | input | Data input bit 7; 5-V tolerant; latched to Q7 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V). |
| 10 | GND | power_in | Ground reference; VCC/GND absolute maximum current ±100 mA. |
| 11 | LE | input | Latch enable; Q outputs track D inputs while HIGH, latch data on falling edge; minimum HIGH pulse width tw(H) = 3.3 ns (VCC = 3.3 V). |
| 12 | Q7 | tri_state | 3-state latch output bit 7; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 13 | Q6 | tri_state | 3-state latch output bit 6; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 14 | Q5 | tri_state | 3-state latch output bit 5; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 15 | Q4 | tri_state | 3-state latch output bit 4; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 16 | Q3 | tri_state | 3-state latch output bit 3; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 17 | Q2 | tri_state | 3-state latch output bit 2; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 18 | Q1 | tri_state | 3-state latch output bit 1; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 19 | Q0 | tri_state | 3-state latch output bit 0; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant. |
| 20 | VCC | power_in | Positive supply voltage; operating range 1.65 to 3.6 V; absolute maximum 6.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | | 6.5 | V | | 4 |
| Input voltage (absolute maximum) | VIN | -0.5 | | 6.5 | V | | 4 |
| Output voltage (absolute maximum) | VOUT | -0.5 | | 6.5 | V | Output in OFF state | 4 |
| Input diode current (absolute maximum) | IIK | -50 | | | mA | | 4 |
| Output diode current (absolute maximum) | IOK | -50 | | 50 | mA | VOUT < GND, VOUT > VCC | 4 |
| Output current (absolute maximum) | IOUT | -50 | | 50 | mA | High or low state; IOUT absolute maximum must be observed | 4 |
| Power dissipation (absolute maximum) | PD | | | 180 | mW | | 4 |
| VCC/ground current (absolute maximum) | ICC/IGND | -100 | | 100 | mA | | 4 |
| Storage temperature (absolute maximum) | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage (operating range) | VCC | 1.65 | | 3.6 | V | Data retention only applies to the low end (Note 1) | 4 |
| Output current IOH/IOL (operating range) | IOH,IOL | -24 | | 24 | mA | VCC = 3.0 to 3.6 V | 4 |
| Output current IOH/IOL (operating range) | IOH,IOL | -12 | | 12 | mA | VCC = 2.7 to 3.0 V | 4 |
| Operating temperature | Topr | -40 | | 85 | °C | | 4 |
| High-level input voltage | VIH | 1.7 | | | V | VCC = 2.3 to 2.7 V | 5 |
| High-level input voltage | VIH | 2 | | | V | VCC = 2.7 to 3.6 V | 5 |
| Low-level input voltage | VIL | | | 0.7 | V | VCC = 2.3 to 2.7 V | 5 |
| Low-level input voltage | VIL | | | 0.8 | V | VCC = 2.7 to 3.6 V | 5 |
| High-level output voltage | VOH | 1.05 | | | V | VIN = VIH or VIL, IOH = -4 mA; VCC = 1.65 V | 5 |
| High-level output voltage | VOH | 1.7 | | | V | VIN = VIH or VIL, IOH = -8 mA; VCC = 2.3 V | 5 |
| High-level output voltage | VOH | 2.2 | | | V | VIN = VIH or VIL, IOH = -12 mA; VCC = 2.7 V | 5 |
| High-level output voltage | VOH | 2.4 | | | V | VIN = VIH or VIL, IOH = -18 mA; VCC = 3.0 V | 5 |
| Low-level output voltage | VOL | | | 0.2 | V | VIN = VIH or VIL, IOL = 100 µA; VCC = 1.65 to 3.6 V | 5 |
| Low-level output voltage | VOL | | | 0.45 | V | VIN = VIH or VIL, IOL = 4 mA; VCC = 1.65 V | 5 |
| Low-level output voltage | VOL | | | 0.7 | V | VIN = VIH or VIL, IOL = 8 mA; VCC = 2.3 V | 5 |
| Low-level output voltage | VOL | | | 0.4 | V | VIN = VIH or VIL, IOL = 12 mA; VCC = 2.7 V | 5 |
| Low-level output voltage | VOL | | | 0.55 | V | VIN = VIH or VIL, IOL = 24 mA; VCC = 3.0 V | 5 |
| Input leakage current | IIN | -5 | | 5 | µA | VIN = 0 to 5.5 V; VCC = 1.65 to 3.6 V | 5 |
| 3-state output OFF-state leakage current | IOZ | -5 | | 5 | µA | VIN = VIH or VIL, VOUT = 0 to 5.5 V; VCC = 1.65 to 3.6 V | 5 |
| Power-OFF leakage current | IOFF | -10 | | 10 | µA | VIN/VOUT = 5.5 V; VCC = 0 | 5 |
| Quiescent supply current | ICC | | | 10 | µA | VIN = VCC or GND; VCC = 1.65 to 3.6 V | 5 |
| Quiescent supply current (per input) | ΔICC | | | 500 | µA | VIN/VOUT = 3.6 to 5.5 V; VIH = VCC - 0.6 V (per input); VCC = 2.7 to 3.6 V | 5 |
| Propagation delay time (D-Q) | tPLH,tPHL | | | 30 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (D-Q) | tPLH,tPHL | | | 10 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (D-Q) | tPLH,tPHL | | | 9 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (D-Q) | tPLH,tPHL | 1.5 | | 8 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (LE-Q) | tPLH,tPHL | | | 30 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (LE-Q) | tPLH,tPHL | | | 10.5 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (LE-Q) | tPLH,tPHL | | | 9.5 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Propagation delay time (LE-Q) | tPLH,tPHL | 1.5 | | 8.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output enable time | tPZL,tPZH | | | 34 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output enable time | tPZL,tPZH | | | 17 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output enable time | tPZL,tPZH | | | 9.5 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output enable time | tPZL,tPZH | 1.5 | | 8.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output disable time | tPLZ,tPHZ | | | 28 | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output disable time | tPLZ,tPHZ | | | 14 | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output disable time | tPLZ,tPHZ | | | 7 | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Output disable time | tPLZ,tPHZ | 1.5 | | 6.5 | ns | VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Minimum pulse width (LE) | tw(H) | 10 | | | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Minimum setup time | tS | 10 | | | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Minimum setup time | tS | 5 | | | ns | VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Minimum setup time | tS | 2.5 | | | ns | VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
| Minimum hold time | th | 1.5 | | | ns | VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 | 6 |
## CAD (KiCad official)
- Symbol: `74LCX573FT`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `74lcx573ft-etched.step` / `74lcx573ft-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `74lcx573ft.step` / `74lcx573ft.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TOSHIBA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588930383781482496) (10 pp, sha256 `6ae4872c9b7d0076`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/74lcx573ft-datasheet.pdf)