main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs 74lcx573ft: rebuilt as a full factory component page (was a placeholder) · Ray
viewers 74lcx573ft: viewers · Ray
74lcx573ft-etched.fit.json 74lcx573ft: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
74lcx573ft-etched.glb 74lcx573ft: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
74lcx573ft-etched.step 74lcx573ft: rebuilt as a full factory component page (was a placeholder) · Ray
74lcx573ft-hero.glb Publish 0.2.0 · Ray
74lcx573ft-hero.overlay.json Publish 0.2.0 · Ray
74lcx573ft.glb Publish 0.1.0 · Ray
74lcx573ft.kicad_mod Publish 0.1.0 · Ray
74lcx573ft.kicad_sym Publish 0.1.0 · Ray
74lcx573ft.lbr Publish 0.1.0 · Ray
74lcx573ft.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.2.0 · Ray

74LCX573FT

TOSHIBA · Latches · TSSOP-20

74LCX573FT from TOSHIBA, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Active-low output enable; when HIGH all Q outputs are forced to high-impedance state; 5-V tolerant, VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
2 D0 input Data input bit 0; 5-V tolerant; latched to Q0 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
3 D1 input Data input bit 1; 5-V tolerant; latched to Q1 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
4 D2 input Data input bit 2; 5-V tolerant; latched to Q2 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
5 D3 input Data input bit 3; 5-V tolerant; latched to Q3 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
6 D4 input Data input bit 4; 5-V tolerant; latched to Q4 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
7 D5 input Data input bit 5; 5-V tolerant; latched to Q5 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
8 D6 input Data input bit 6; 5-V tolerant; latched to Q6 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
9 D7 input Data input bit 7; 5-V tolerant; latched to Q7 on falling edge of LE; VIH(min) = VCC×0.9 (VCC = 1.65-2.3 V).
10 GND power_in Ground reference; VCC/GND absolute maximum current ±100 mA.
11 LE input Latch enable; Q outputs track D inputs while HIGH, latch data on falling edge; minimum HIGH pulse width tw(H) = 3.3 ns (VCC = 3.3 V).
12 Q7 tri_state 3-state latch output bit 7; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
13 Q6 tri_state 3-state latch output bit 6; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
14 Q5 tri_state 3-state latch output bit 5; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
15 Q4 tri_state 3-state latch output bit 4; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
16 Q3 tri_state 3-state latch output bit 3; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
17 Q2 tri_state 3-state latch output bit 2; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
18 Q1 tri_state 3-state latch output bit 1; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
19 Q0 tri_state 3-state latch output bit 0; IOH = −24 mA min, IOL = 24 mA min (VCC = 3.0-3.6 V); high-impedance when OE is HIGH; 5-V tolerant.
20 VCC power_in Positive supply voltage; operating range 1.65 to 3.6 V; absolute maximum 6.5 V.

Key specifications

Parameter Value
Manufacturer TOSHIBA
Package TSSOP-20
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC -0.5 6.5 V 4
Input voltage (absolute maximum) VIN -0.5 6.5 V 4
Output voltage (absolute maximum) VOUT -0.5 6.5 V Output in OFF state 4
Input diode current (absolute maximum) IIK -50 mA 4
Output diode current (absolute maximum) IOK -50 50 mA VOUT < GND, VOUT > VCC 4
Output current (absolute maximum) IOUT -50 50 mA High or low state; IOUT absolute maximum must be observed 4
Power dissipation (absolute maximum) PD 180 mW 4
VCC/ground current (absolute maximum) ICC/IGND -100 100 mA 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Supply voltage (operating range) VCC 1.65 3.6 V Data retention only applies to the low end (Note 1) 4
Output current IOH/IOL (operating range) IOH,IOL -24 24 mA VCC = 3.0 to 3.6 V 4
Output current IOH/IOL (operating range) IOH,IOL -12 12 mA VCC = 2.7 to 3.0 V 4
Operating temperature Topr -40 85 °C 4
High-level input voltage VIH 1.7 V VCC = 2.3 to 2.7 V 5
High-level input voltage VIH 2 V VCC = 2.7 to 3.6 V 5
Low-level input voltage VIL 0.7 V VCC = 2.3 to 2.7 V 5
Low-level input voltage VIL 0.8 V VCC = 2.7 to 3.6 V 5
High-level output voltage VOH 1.05 V VIN = VIH or VIL, IOH = -4 mA; VCC = 1.65 V 5
High-level output voltage VOH 1.7 V VIN = VIH or VIL, IOH = -8 mA; VCC = 2.3 V 5
High-level output voltage VOH 2.2 V VIN = VIH or VIL, IOH = -12 mA; VCC = 2.7 V 5
High-level output voltage VOH 2.4 V VIN = VIH or VIL, IOH = -18 mA; VCC = 3.0 V 5
Low-level output voltage VOL 0.2 V VIN = VIH or VIL, IOL = 100 µA; VCC = 1.65 to 3.6 V 5
Low-level output voltage VOL 0.45 V VIN = VIH or VIL, IOL = 4 mA; VCC = 1.65 V 5
Low-level output voltage VOL 0.7 V VIN = VIH or VIL, IOL = 8 mA; VCC = 2.3 V 5
Low-level output voltage VOL 0.4 V VIN = VIH or VIL, IOL = 12 mA; VCC = 2.7 V 5
Low-level output voltage VOL 0.55 V VIN = VIH or VIL, IOL = 24 mA; VCC = 3.0 V 5
Input leakage current IIN -5 5 µA VIN = 0 to 5.5 V; VCC = 1.65 to 3.6 V 5
3-state output OFF-state leakage current IOZ -5 5 µA VIN = VIH or VIL, VOUT = 0 to 5.5 V; VCC = 1.65 to 3.6 V 5
Power-OFF leakage current IOFF -10 10 µA VIN/VOUT = 5.5 V; VCC = 0 5
Quiescent supply current ICC 10 µA VIN = VCC or GND; VCC = 1.65 to 3.6 V 5
Quiescent supply current (per input) ΔICC 500 µA VIN/VOUT = 3.6 to 5.5 V; VIH = VCC - 0.6 V (per input); VCC = 2.7 to 3.6 V 5
Propagation delay time (D-Q) tPLH,tPHL 30 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (D-Q) tPLH,tPHL 10 ns VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (D-Q) tPLH,tPHL 9 ns VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (D-Q) tPLH,tPHL 1.5 8 ns VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (LE-Q) tPLH,tPHL 30 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (LE-Q) tPLH,tPHL 10.5 ns VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (LE-Q) tPLH,tPHL 9.5 ns VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 6
Propagation delay time (LE-Q) tPLH,tPHL 1.5 8.5 ns VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 6
Output enable time tPZL,tPZH 34 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Output enable time tPZL,tPZH 17 ns VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 6
Output enable time tPZL,tPZH 9.5 ns VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 6
Output enable time tPZL,tPZH 1.5 8.5 ns VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 6
Output disable time tPLZ,tPHZ 28 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Output disable time tPLZ,tPHZ 14 ns VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 6
Output disable time tPLZ,tPHZ 7 ns VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 6
Output disable time tPLZ,tPHZ 1.5 6.5 ns VCC = 3.3 ± 0.3 V; 12.5 AC test circuit, Table 12.6.1 6
Minimum pulse width (LE) tw(H) 10 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Minimum setup time tS 10 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6
Minimum setup time tS 5 ns VCC = 2.5 ± 0.2 V; 12.5 AC test circuit, Table 12.6.1 6
Minimum setup time tS 2.5 ns VCC = 2.7 V; 12.5 AC test circuit, Table 12.6.1 6
Minimum hold time th 1.5 ns VCC = 1.8 ± 0.15 V; 12.5 AC test circuit, Table 12.6.1 6

CAD (KiCad official)

  • Symbol: 74LCX573FT
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: 74lcx573ft-etched.step / 74lcx573ft-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 74lcx573ft.step / 74lcx573ft.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TOSHIBA datasheet (10 pp, sha256 6ae4872c9b7d0076, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF