7499111121A

{
 "plan": {
  "schema": "adom/mark-plan@1",
  "mpn": "7499111121A",
  "step": "7499111121a.step",
  "footprint": "7499111121a.kicad_mod",
  "standUp": [],
  "standUpSource": "as-is (Z up)",
  "inputs": {
   "up": "auto",
   "face": "auto",
   "along": null,
   "upSupplied": false,
   "faceSupplied": false,
   "faceSource": "inferred: LED detected, front long side wall"
  },
  "face": "side",
  "pin1": {
   "source": "footprint pad 1",
   "xyMm": [
    -5.715,
    9.155
   ],
   "corner": "left/lower"
  },
  "existingMarks": [],
  "vendorMarking": {
   "present": false,
   "glyphFaces": 0
  },
  "faceNormal": [
   -1.0,
   0.0,
   0.0
  ],
  "longAxis": {
   "axis": "y",
   "vector": [
    0.0,
    1.0,
    0.0
   ],
   "why": "long side wall (21.25 mm)",
   "source": "side-wall",
   "override": null,
   "pinRows": null
  },
  "readingDirection": {
   "vector": [
    -0.0,
    -1.0,
    0.0
   ],
   "angleDeg": 270,
   "textUp": [
    1.0,
    -0.0,
    0.0
   ],
   "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
  },
  "band": {
   "regionMm": [
    -0.0,
    -10.625,
    13.5,
    10.625
   ],
   "zMm": 8.0,
   "lengthMm": 21.25,
   "heightMm": 13.5,
   "why": "flat high band of the side wall",
   "terminationsExcludedBy": null,
   "trimmedEnds": [],
   "keepouts": [],
   "sideTurn": {
    "axis": "y",
    "quarterTurns": 1,
    "textUpInTurnedFrame": [
     1,
     0,
     0
    ],
    "baselineInTurnedFrame": [
     0.0,
     -1.0,
     0.0
    ]
   },
   "margins": {
    "lengthEachSide": 0.12,
    "heightEachSide": 0.15
   }
  },
  "text": {
   "lines": [
    "7499111121A"
   ],
   "chars": 11,
   "capHeightMm": 1.8269,
   "smallestLineMm": 1.8269,
   "heightPctOfBand": 13.5,
   "why": "one line (two lines would give 2.014 mm on the smaller line, not 1.15x larger)",
   "alternative": {
    "lines": [
     "7499111121",
     "A"
    ],
    "capHeightMm": 2.0137,
    "smallestLineMm": 2.0137
   },
   "font": "service-step2glb /laser-etch (single-stroke outline font)"
  },
  "etch": {
   "poseQuarterTurnsZ": 1,
   "service": "/laser-etch?mode=flat",
   "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
  },
  "outline": {
   "upAxis": "z",
   "poseRotZDeg": 180,
   "rot": 90,
   "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn 7499111121A (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws 7499111121A on the planned band, rot 90)",
   "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
  },
  "widget": {
   "px": 320,
   "pxPerMm": 10.56,
   "capHeightPx": 15.7
  },
  "hints": [
   "LED detected (footprint/model name): the mark goes on the front long side wall, the window stays clear; --face top overrides",
   "LED: the top window stays clear; the mark goes on the front long wall"
  ],
  "warnings": [],
  "summary": "Mark along the 21.25 mm axis (-Y), 1.83 mm text, upright with pin 1 left lower, outline rot 90 after a 180 deg pose turn; ~16 px caps at 320 px"
 },
 "etch": {
  "out": "7499111121a-etched.step",
  "mpn": "7499111121A",
  "lines": [
   "7499111121A"
  ],
  "removedOldMarks": [],
  "turns": [
   {
    "axis": "y",
    "quarterTurns": 1
   },
   {
    "axis": "z",
    "quarterTurns": 1
   }
  ],
  "serviceMarkTurnedQuarter": 0,
  "line2Scaled": false,
  "fit": {
   "scale": 0.8749,
   "capMm": 1.7821,
   "markMm": [
    16.15,
    1.8609
   ],
   "bandMm": [
    21.25,
    13.5
   ],
   "zMm": 8.005
  }
 }
}