74439346047

{
  "schema": "adom/mark-check@1",
  "step": "74439346047-etched.step",
  "mpn": "74439346047",
  "status": "PASS",
  "checks": [
    {
      "check": "axis",
      "status": "PASS",
      "detail": "text along the 6.25 mm axis",
      "angleDeg": 0
    },
    {
      "check": "upright",
      "status": "PASS",
      "detail": "upright, left to right, pin 1 centre lower"
    },
    {
      "check": "size",
      "status": "PASS",
      "detail": "text height 0.997 mm, 100% of what fits (1.002 mm), block fills 46% of the 5.00 mm band height",
      "capMm": 0.9973,
      "fitMm": 1.0021
    },
    {
      "check": "band",
      "status": "PASS",
      "detail": "inside the usable band"
    },
    {
      "check": "flat",
      "status": "PASS",
      "detail": "flat, coplanar with the face (+5 um)"
    },
    {
      "check": "group",
      "status": "PASS",
      "detail": "Adom.LaserEtch group"
    },
    {
      "check": "colour",
      "status": "PASS",
      "detail": "light mark (sRGB 0.90, 0.90, 0.89)",
      "rgb": [
        0.896243869286,
        0.896243869286,
        0.886003966688
      ]
    },
    {
      "check": "widget",
      "status": "PASS",
      "detail": "24.9 px caps with the outline 320 px wide",
      "capHeightPx320": 24.9
    }
  ],
  "frame": {
    "reference": "normalized pose: footprint frame, X right, Y up, Z up off the board (after the stand-up turns); the marked side wall turned to face +Z",
    "sourceToNormalized": {
      "turns": [
        {
          "axis": "y",
          "quarterTurns": 1
        }
      ],
      "text": "90 deg about Y",
      "source": "as-is (Z up)"
    },
    "normalizedToOutput": {
      "checkImage": {
        "turns": [
          {
            "axis": "z",
            "quarterTurns": 1
          }
        ],
        "text": "90 deg about Z",
        "pose": "standard reading pose: reading direction to +X, text up +Y, pin 1 lower left"
      },
      "outline": {
        "turns": [
          {
            "axis": "z",
            "quarterTurns": 2
          }
        ],
        "text": "180 deg about Z",
        "pose": "iso outline from +X+Y+Z"
      }
    },
    "modelUp": {
      "supplied": false,
      "source": "as-is (Z up)"
    },
    "packageFront": {
      "supplied": true,
      "face": "side",
      "source": "--face side"
    },
    "textUp": {
      "supplied": false,
      "vector": [
        1.0,
        -0.0,
        0.0
      ],
      "source": "inferred from pin 1: footprint pad 1"
    },
    "mountedPose": false,
    "summary": "frame: normalized pose (source -> normalized: 90 deg about Y, as-is (Z up); normalized -> check image: 90 deg about Z, -> outline: 180 deg about Z); model up inferred, face side supplied, text up inferred from pin 1; not a mounted-pose check"
  },
  "plan": {
    "summary": "Mark along the 6.25 mm axis (-Y), 1.00 mm text (2 lines), upright with pin 1 centre lower, outline rot 90 after a 180 deg pose turn; ~25 px caps at 320 px",
    "band": [
      0.6,
      -3.125,
      5.6,
      3.125
    ],
    "readingDirection": [
      -0.0,
      -1.0,
      0.0
    ],
    "lines": [
      "74439",
      "346047"
    ]
  },
  "thresholds": {
    "sizePass": 0.8,
    "sizeFail": 0.6,
    "widgetPxPass": 6.0,
    "widgetPxFail": 4.0,
    "outlineOffsetMax": 0.15,
    "coplanarMaxMm": 0.02
  },
  "image": "74439346047-etched.check.png",
  "reportPath": "74439346047-etched.check.json"
}