74439346047
Public Made by Adomby adom
Würth Elektronik 74439346047 WE-XHMI 6060 shielded SMT power inductor, 4.7 uH +/-20%, IR 7.4 A, Isat 6.5 A (10%), RDC 13 mOhm typ, 6.65 x 6.45 x 5.8 mm, AEC-Q200. KiCad symbol, footprint, Fusion library and 3D.
| Name | Last updated |
|---|---|
| docs | 2d ago |
| provenance | 2d ago |
| viewers | 2d ago |
| 74439346047-etched.glb | 2d ago |
| 74439346047-etched.step | 2d ago |
| 74439346047-hero.glb | 2d ago |
| 74439346047-hero.overlay.json | 2d ago |
| 74439346047.glb | 2d ago |
| 74439346047.kicad_mod | 2d ago |
| 74439346047.kicad_sym | 2d ago |
| 74439346047.lbr | 2d ago |
| 74439346047.step | 2d ago |
| LICENSE | 2d ago |
| models.json | 2d ago |
| page.json | 2d ago |
| README.md | 2d ago |
74439346047
Würth Elektronik · Power inductors (shielded, SMT) · WE-XHMI 6060, 6.65 x 6.45 x 5.8 mm, 2 terminals
Würth Elektronik 74439346047 WE-XHMI 6060 shielded SMT power inductor, 4.7 uH +/-20%, IR 7.4 A, Isat 6.5 A (10%), RDC 13 mOhm typ, 6.65 x 6.45 x 5.8 mm, AEC-Q200.
Key specifications
| Parameter | Value | Source |
|---|---|---|
| Inductance | 4.7 uH +/-20% (100 kHz, 10 mA) | p.1 |
| Rated current IR (dT = 40 K) | 7.4 A max | p.1 |
| Rated current IRP (dT = 40 K, IEC 62024-2) | 9.6 A max | p.1 |
| Saturation current | 6.5 A typ (10% drop), 13 A typ (30% drop) | p.1 |
| DC resistance | 13 mOhm typ, 14.3 mOhm max (20 C) | p.1 |
| Self-resonant frequency | 28 MHz typ | p.1 |
| Operating voltage | 120 V DC max | p.1 |
| Operating temperature | -40 C to +125 C | p.1 |
| Qualification | AEC-Q200 grade 1, MSL 1 | p.1 |
| Size | 6.65 x 6.45 x 5.8 mm | p.1 |
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 (start of winding, marked by dot) |
| 2 | 2 | passive | Terminal 2 |
Source: p.1 Schematic + Product Marking (start-of-winding dot = pin 1).
Footprint and pin 1
The part is not polarized electrically. Pad 1 is the start of the winding, marked by the dot on the top of the part (datasheet p.1 product marking). The footprint puts pad 1 on the left, matching Würth's own KiCad footprint L_Wurth_WE-XHMI-6060, with a silkscreen dot below pad 1. Keep vias and sensitive traces out from under the part (datasheet land pattern note).
Land pattern source: p.1 'Recommended Land Pattern [mm]': pads 5.5 x 1.45, gap 2.55 -> pad centres x = +-2.00 mm; 'no vias and sensitive traces underneath the component'.
Pads: 2 x 1.45 x 5.5 mm at x = -2.0 and +2.0 mm (2.55 mm gap), the datasheet's recommended land pattern; identical to Würth's own KiCad footprint L_Wurth_WE-XHMI-6060.
3D models
The model is Würth Elektronik's own L_Wurth_WE-XHMI-6060 from its KiCad library (CC BY-SA 4.0), modified by Adom: a header note marks it as modified and names the original, and the -etched variant adds the virtual MPN mark. Geometry, pose and colours are Würth's. It is Z-up with the terminals on z = 0. Würth's model carries a placeholder engraving 'Marking' on the top, so the MPN mark sits on a side wall. The product-page STEP download is not published here because it carries no licence text.
| File | What it is |
|---|---|
74439346047.step / 74439346047.glb |
Plain model |
74439346047-etched.step / 74439346047-etched.glb |
The same model with the MPN as a virtual laser mark (side face, adom-aiflow-etch, gate PASS). This is the board/library model. |
74439346047-hero.glb |
The page's 3D view: the marked model plus teal dashed pad outlines, silkscreen with pin 1 and signal names (adom-hero 1.4). Not for boards. |
The MPN mark is an identification aid added by Adom, not a claim about the manufacturer's real marking.
Sourcing
| Distributor | Part number |
|---|---|
| Mouser | 710-74439346047 |
| DigiKey | 732-10703-2-ND |
| LCSC | not listed |
Snapshot 2026-10-17 (adom-parts-search): Mouser 710-74439346047: 887 in stock, USD 4.05 (1 pc), USD 3.68 (100). DigiKey 732-10703-2-ND: 8,572 in stock, USD 4.05. LCSC: not listed.
Manufacturer and resources
- Datasheet 74439346047, revision 004.002 (2024-10-26)
- WE-XHMI product family page (REDEXPERT simulation, samples, CAD)
- Würth Elektronik KiCad library (footprint and 3D model L_Wurth_WE-XHMI-6060)
Manufacturer documents are linked, not copied: their terms do not allow redistribution.
Provenance
| File | Classification | Source |
|---|---|---|
74439346047.kicad_sym |
source-derived | p.1 Schematic + Product Marking (start-of-winding dot = pin 1) |
74439346047.kicad_mod |
source-derived | p.1 'Recommended Land Pattern [mm]': pads 5.5 x 1.45, gap 2.55 -> pad centres x = +-2.00 mm; 'no vias and sensitive traces underneath the component' |
74439346047.step |
manufacturer-supplied (modified) | wurth_kicad_library_step |
74439346047-etched.step |
derived (virtual MPN mark added) | 74439346047.step |
74439346047.glb |
derived (format conversion) | 74439346047.step |
74439346047-etched.glb |
derived (format conversion) | 74439346047-etched.step |
74439346047-hero.glb |
derived (annotated presentation model, not for board use) | 74439346047-etched.glb, 74439346047.kicad_mod, page.json component.pins |
74439346047.lbr |
derived | 74439346047.kicad_sym, 74439346047.kicad_mod |
Every file's SHA-256, the source documents with their hashes and retrieval dates, the dimensions used and the assumptions are in provenance/provenance.json. The MPN mark plan and gate result are in provenance/.
Found a wrong pin, pad or dimension? Open an issue on this page with the file name and hash, the disputed value, the source page and a screenshot.
License
Adom-authored files: CC BY-SA 4.0. 3D model: modified from Würth Elektronik's CC BY-SA 4.0 KiCad library model, attribution and terms in LICENSE. See LICENSE.