main
Ray
Publish 0.1.0
af755b3
65HVD75EIM
HGSEMI · RS-485/RS-422 ICs · SOIC-8
65HVD75EIM from HGSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high when A−B is at or above the receiver threshold and low when A−B is at or below −200 mV (function table and failsafe section give the threshold as −50 mV). |
| 2 | RE | input | Receiver output enable, active low: RO is active when RE is low and high-impedance when RE is high; RE high with DE low puts the device into low-power shutdown; this pin uses a hot-plug input structure. |
| 3 | DE | input | Driver output enable: the driver output is active when DE is high and high-impedance when DE is low; DE low with RE high puts the device into low-power shutdown; this pin uses a hot-plug input structure. |
| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output on the RS-485/RS-422 bus; the bus common-mode range is −7 V to +12 V. |
| 7 | B | bidirectional | Receiver inverting input and driver inverting output on the RS-485/RS-422 bus; the bus common-mode range is −7 V to +12 V. |
| 8 | VCC | power_in | Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; decouple with a 0.1 µF capacitor to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3.15 | 3.45 | V | 3 | ||
| Differential driver output voltage, RL=100 ohm (RS-422) | VOD | 2 | V | Fig 1, RL=100 ohm; max printed as VCC | 3 | ||
| Differential driver output voltage, RL=54 ohm (RS-485) | VOD | 1.5 | V | Fig 1, RL=54 ohm; max printed as VCC | 3 | ||
| Change in magnitude of differential driver output voltage | dVOD | 0.2 | V | Fig 1, RL=100 ohm or RL=54 ohm | 3 | ||
| Driver common-mode output voltage | VOC | 3 | V | Fig 1, RL=100 ohm or RL=54 ohm; min printed as VCC/2 | 3 | ||
| Change in magnitude of common-mode output voltage | dVOC | 0.2 | V | Fig 1, RL=100 ohm or RL=54 ohm | 3 | ||
| Input high voltage | VIH | 2 | V | DE, DI inputs | 4 | ||
| Input low voltage | VIL | 0.8 | V | DE, DI inputs | 4 | ||
| Input current | IIN | -1 | 1 | uA | DE, DI inputs | 4 | |
| Input current (A,B) full duplex | IA, IB | 125 | uA | DE=GND, VCC=GND or VCC, VIN=12V | 4 | ||
| Input current (A,B) full duplex | IA, IB | -75 | uA | DE=GND, VCC=GND or VCC, VIN=-7V | 4 | ||
| Output leakage current (Y,Z) full duplex | IO | 125 | uA | DE=GND, VCC=GND or VCC, VIN=12V | 4 | ||
| Output leakage current (Y,Z) full duplex | IO | -100 | uA | DE=GND, VCC=GND or VCC, VIN=-7V | 4 | ||
| Driver short-circuit output current | IOSD | 250 | mA | 0 <= VOUT <= 12V | 4 | ||
| Driver short-circuit output current | IOSD | -250 | mA | -7 <= VOUT <= VCC | 4 | ||
| Driver short-circuit foldback output current | IOSDF | 20 | mA | VCC-1V <= VOUT <= VCC+0.5V | 4 | ||
| Driver short-circuit foldback output current | IOSDF | -20 | mA | -0.5V <= VOUT <= +1V | 4 | ||
| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V <= VCM <= 12V | 4 |
| Receiver output low voltage | VOL | 0.4 | V | IO=4mA, VID=-200mV | 4 | ||
| Receiver tri-state output current | IOZR | -1 | 1 | uA | 0 <= VO <= VCC | 4 | |
| Receiver output short-circuit current | IOSR | -95 | 95 | mA | 0V <= VRO <= VCC | 4 | |
| Standby supply current | ISHDN | 0.05 | 10 | uA | DE=GND; second control pin = VCC (symbol garbled in source) | 5 | |
| Supply current, no load | ICC | 400 | 900 | uA | No load; [control pin garbled]=VCC; DI=GND or VCC; DE=VCC | 5 | |
| Supply current, no load | ICC | 330 | 600 | uA | No load; [control pin garbled]=VCC; DI=GND or VCC; DE=GND | 5 | |
| Supply current, no load | ICC | 400 | 1000 | uA | No load; [control pin garbled]=GND; DI=GND or VCC; DE=VCC | 5 | |
| Supply current, no load | ICC | 330 | 800 | uA | No load; [control pin garbled]=GND; DI=GND or VCC; DE=GND | 5 | |
| IEC 61000-4-2 air-gap discharge on A,B pins | -16 | 16 | kV | RS-485 pins A,B | 5 | ||
| IEC 61000-4-2 contact discharge (half duplex) on A,B pins | -16 | 16 | kV | RS-485 pins A,B | 5 | ||
| HBM ESD pin to ground on A,B pins | -16 | 16 | kV | RS-485 pins A,B | 5 | ||
| Operating temperature range (industrial, EI) | -40 | 85 | C | 65HVDxxEI | 3 | ||
| Storage temperature | -65 | 150 | C | 3 | |||
| Lead temperature, soldering | TLEAD | 260 | C | 10 s soldering | 3 | ||
| Supply voltage | VCC | 6 | V | 3 | |||
| Control input voltage | RE, DE | -0.3 | 6 | V | 3 | ||
| Driver input voltage | DI | -0.3 | 6 | V | 3 | ||
| Driver output voltage | A,B | -7 | 12 | V | 3 | ||
| Receiver input voltage | A,B | -7 | 12 | V | 3 | ||
| Receiver output voltage | RO | -0.3 | V | max printed as VCC+0.3 | 3 | ||
| Continuous power dissipation | 500 | mW | TA=+70C, 8-pin SOP | 3 | |||
| Driver propagation delay | tDPLH, tDPHL | 200 | 1000 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 | |
| Driver output skew | tDSKEW | -140 | 140 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 | |
| Driver rise and fall time | tDR, tDF | 250 | 900 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 | |
| Driver enable to output high | tDZH | 2500 | ns | Fig 3&6, CL=100pF, S3 closed | 7 | ||
| Driver enable to output low | tDZL | 2500 | ns | Fig 3&6, CL=100pF, S2 closed | 7 | ||
| Driver low to disable time | tDLZ | 100 | ns | Fig 3&6, CL=15pF, S2 closed | 7 | ||
| Driver high to disable time | tDHZ | 100 | ns | Fig 3&6, CL=15pF, S3 closed | 7 | ||
| Driver enable from standby to output high | tDZH(SHDN) | 5500 | ns | Fig 3&6, CL=15pF, S3 closed | 7 | ||
| Driver enable from standby to output low | tDZL(SHDN) | 5500 | ns | Fig 3&6, CL=15pF, S2 closed | 7 | ||
| Standby time (driver) | tSHDN | 50 | 700 | ns | Note 4 | 7 | |
| Receiver propagation delay | tRPLH, tRPHL | 200 | ns | Fig 7&8, CL=15pF, /VID/>=2.0V, VID<=15ns | 7 | ||
| Receiver output skew | tRSKEW | -30 | 30 | ns | Fig 7&8, CL=15pF, /VID/>=2.0V, VID<=15ns | 7 | |
| Receiver enable to output low | tRZL | 50 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 | ||
| Receiver enable to output high | tRZH | 50 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 | ||
| Receiver low to disable time | tRLZ | 50 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 | ||
| Receiver high to disable time | tRHZ | 50 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 | ||
| Receiver enable from standby to output high | tRZH(SHDN) | 5500 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 | ||
| Receiver enable from standby to output low | tRZL(SHDN) | 5500 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 | ||
| Standby time (receiver) | tSHDN | 50 | 700 | ns | Note 4 | 7 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
65HVD75EIM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8, generated on the KiCad land (body 3.9 x 5 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
65hvd75eim-etched.step/65hvd75eim-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);65hvd75eim.step/65hvd75eim.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (20 pp, sha256
11f027c743ac8483, retrieved 2026-11-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# 65HVD75EIM
**HGSEMI** · RS-485/RS-422 ICs · SOIC-8
65HVD75EIM from HGSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high when A−B is at or above the receiver threshold and low when A−B is at or below −200 mV (function table and failsafe section give the threshold as −50 mV). |
| 2 | RE | input | Receiver output enable, active low: RO is active when RE is low and high-impedance when RE is high; RE high with DE low puts the device into low-power shutdown; this pin uses a hot-plug input structure. |
| 3 | DE | input | Driver output enable: the driver output is active when DE is high and high-impedance when DE is low; DE low with RE high puts the device into low-power shutdown; this pin uses a hot-plug input structure. |
| 4 | DI | input | Driver input: with DE high, a low on DI drives A low and B high, and a high on DI drives A high and B low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output on the RS-485/RS-422 bus; the bus common-mode range is −7 V to +12 V. |
| 7 | B | bidirectional | Receiver inverting input and driver inverting output on the RS-485/RS-422 bus; the bus common-mode range is −7 V to +12 V. |
| 8 | VCC | power_in | Positive supply: 3.15 V ≤ VCC ≤ 3.45 V; decouple with a 0.1 µF capacitor to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOIC-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3.15 | | 3.45 | V | | 3 |
| Differential driver output voltage, RL=100 ohm (RS-422) | VOD | 2 | | | V | Fig 1, RL=100 ohm; max printed as VCC | 3 |
| Differential driver output voltage, RL=54 ohm (RS-485) | VOD | 1.5 | | | V | Fig 1, RL=54 ohm; max printed as VCC | 3 |
| Change in magnitude of differential driver output voltage | dVOD | | | 0.2 | V | Fig 1, RL=100 ohm or RL=54 ohm | 3 |
| Driver common-mode output voltage | VOC | | | 3 | V | Fig 1, RL=100 ohm or RL=54 ohm; min printed as VCC/2 | 3 |
| Change in magnitude of common-mode output voltage | dVOC | | | 0.2 | V | Fig 1, RL=100 ohm or RL=54 ohm | 3 |
| Input high voltage | VIH | 2 | | | V | DE, DI inputs | 4 |
| Input low voltage | VIL | | | 0.8 | V | DE, DI inputs | 4 |
| Input current | IIN | -1 | | 1 | uA | DE, DI inputs | 4 |
| Input current (A,B) full duplex | IA, IB | | | 125 | uA | DE=GND, VCC=GND or VCC, VIN=12V | 4 |
| Input current (A,B) full duplex | IA, IB | -75 | | | uA | DE=GND, VCC=GND or VCC, VIN=-7V | 4 |
| Output leakage current (Y,Z) full duplex | IO | | | 125 | uA | DE=GND, VCC=GND or VCC, VIN=12V | 4 |
| Output leakage current (Y,Z) full duplex | IO | -100 | | | uA | DE=GND, VCC=GND or VCC, VIN=-7V | 4 |
| Driver short-circuit output current | IOSD | | | 250 | mA | 0 <= VOUT <= 12V | 4 |
| Driver short-circuit output current | IOSD | -250 | | | mA | -7 <= VOUT <= VCC | 4 |
| Driver short-circuit foldback output current | IOSDF | | | 20 | mA | VCC-1V <= VOUT <= VCC+0.5V | 4 |
| Driver short-circuit foldback output current | IOSDF | -20 | | | mA | -0.5V <= VOUT <= +1V | 4 |
| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V <= VCM <= 12V | 4 |
| Receiver output low voltage | VOL | | | 0.4 | V | IO=4mA, VID=-200mV | 4 |
| Receiver tri-state output current | IOZR | -1 | | 1 | uA | 0 <= VO <= VCC | 4 |
| Receiver output short-circuit current | IOSR | -95 | | 95 | mA | 0V <= VRO <= VCC | 4 |
| Standby supply current | ISHDN | | 0.05 | 10 | uA | DE=GND; second control pin = VCC (symbol garbled in source) | 5 |
| Supply current, no load | ICC | | 400 | 900 | uA | No load; [control pin garbled]=VCC; DI=GND or VCC; DE=VCC | 5 |
| Supply current, no load | ICC | | 330 | 600 | uA | No load; [control pin garbled]=VCC; DI=GND or VCC; DE=GND | 5 |
| Supply current, no load | ICC | | 400 | 1000 | uA | No load; [control pin garbled]=GND; DI=GND or VCC; DE=VCC | 5 |
| Supply current, no load | ICC | | 330 | 800 | uA | No load; [control pin garbled]=GND; DI=GND or VCC; DE=GND | 5 |
| IEC 61000-4-2 air-gap discharge on A,B pins | | -16 | | 16 | kV | RS-485 pins A,B | 5 |
| IEC 61000-4-2 contact discharge (half duplex) on A,B pins | | -16 | | 16 | kV | RS-485 pins A,B | 5 |
| HBM ESD pin to ground on A,B pins | | -16 | | 16 | kV | RS-485 pins A,B | 5 |
| Operating temperature range (industrial, EI) | | -40 | | 85 | C | 65HVDxxEI | 3 |
| Storage temperature | | -65 | | 150 | C | | 3 |
| Lead temperature, soldering | TLEAD | | | 260 | C | 10 s soldering | 3 |
| Supply voltage | VCC | | | 6 | V | | 3 |
| Control input voltage | RE, DE | -0.3 | | 6 | V | | 3 |
| Driver input voltage | DI | -0.3 | | 6 | V | | 3 |
| Driver output voltage | A,B | -7 | | 12 | V | | 3 |
| Receiver input voltage | A,B | -7 | | 12 | V | | 3 |
| Receiver output voltage | RO | -0.3 | | | V | max printed as VCC+0.3 | 3 |
| Continuous power dissipation | | | | 500 | mW | TA=+70C, 8-pin SOP | 3 |
| Driver propagation delay | tDPLH, tDPHL | 200 | | 1000 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 |
| Driver output skew | tDSKEW | -140 | | 140 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 |
| Driver rise and fall time | tDR, tDF | 250 | | 900 | ns | Fig 2&5, RL=54 ohm, CL=50pF | 7 |
| Driver enable to output high | tDZH | | | 2500 | ns | Fig 3&6, CL=100pF, S3 closed | 7 |
| Driver enable to output low | tDZL | | | 2500 | ns | Fig 3&6, CL=100pF, S2 closed | 7 |
| Driver low to disable time | tDLZ | | | 100 | ns | Fig 3&6, CL=15pF, S2 closed | 7 |
| Driver high to disable time | tDHZ | | | 100 | ns | Fig 3&6, CL=15pF, S3 closed | 7 |
| Driver enable from standby to output high | tDZH(SHDN) | | | 5500 | ns | Fig 3&6, CL=15pF, S3 closed | 7 |
| Driver enable from standby to output low | tDZL(SHDN) | | | 5500 | ns | Fig 3&6, CL=15pF, S2 closed | 7 |
| Standby time (driver) | tSHDN | 50 | | 700 | ns | Note 4 | 7 |
| Receiver propagation delay | tRPLH, tRPHL | | | 200 | ns | Fig 7&8, CL=15pF, /VID/>=2.0V, VID<=15ns | 7 |
| Receiver output skew | tRSKEW | -30 | | 30 | ns | Fig 7&8, CL=15pF, /VID/>=2.0V, VID<=15ns | 7 |
| Receiver enable to output low | tRZL | | | 50 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 |
| Receiver enable to output high | tRZH | | | 50 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 |
| Receiver low to disable time | tRLZ | | | 50 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 |
| Receiver high to disable time | tRHZ | | | 50 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 |
| Receiver enable from standby to output high | tRZH(SHDN) | | | 5500 | ns | Fig 4&9, S1=-1.5V, S2 to VCC | 7 |
| Receiver enable from standby to output low | tRZL(SHDN) | | | 5500 | ns | Fig 4&9, S1=+1.5V, S2 to GND | 7 |
| Standby time (receiver) | tSHDN | 50 | | 700 | ns | Note 4 | 7 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `65HVD75EIM`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8, generated on the KiCad land (body 3.9 x 5 mm, terminals on the pads, 1.4500000000000002 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `65hvd75eim-etched.step` / `65hvd75eim-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `65hvd75eim.step` / `65hvd75eim.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/65hvd75eim-datasheet.pdf) (20 pp, sha256 `11f027c743ac8483`, retrieved 2026-11-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/65hvd75eim-datasheet.pdf)