component

5033981892

Public Made by Adom

by adom

Molex PC Card Sockets, SMD. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentconnectors5033981892board-derived

Verified 5033981892

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Molex sales drawing SD-503398-003 revision J (503398-1892, microSD push/push)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: the page already carries Molex's current sales drawing SD-503398-003 rev J (dated 2020/01/14, released 2020/04/02); sha256 5eacff35 matches the molex.com salesdrawingpdf fetched 2026-10-27
  • ✓Pins 1-8 match the drawing's contact list (p.1) by number and name: DAT2, CD/DAT3, CMD, VDD, CLK, Vss, DAT0, DAT1. Renamed 2 DAT3/CD -> CD/DAT3 and 6 VSS -> Vss (drawing spelling)
  • ✓Pads 9 and 10 identified from the recommended PCB pattern (p.2): pad 9 (0.90 x 0.93 mm, 2.21 mm from the left edge) is DETECT LEVER MOUNT AREA (Vss: GROUND), pad 10 (1.05 x 0.78 mm, 6.40 mm from the left edge) is DETECT SWITCH MOUNT AREA; renamed 9 DETECT SWITCH -> DETECT LEVER. Note 4: switch closed with a card inserted, open with no card. Pad 11 = the four SHELL MOUNT AREA pads
  • ✓Pin types: all passive (connector contacts); was bidirectional/input/power_in on the card contacts
  • ✓Descriptions rewritten from the drawing only (the old text carried SPI-mode, supply-range and clock-rate claims the Molex drawing does not make); pin 2 described
  • ✓Footprint vs recommended PCB pattern (p.2): 8 terminal pads 0.70 x 1.10 mm at 1.10 mm pitch, 0.35 mm below the pattern's top edge, pin 1 centre 4.45 mm from the left edge, pin 1 to pin 8 = 7.70 mm; shell pads 1.14 x 1.83 (top left), 0.86 x 2.80 (top right), 0.70 x 3.33 (both bottom corners); detect pads 0.90 x 0.93 and 1.05 x 0.78; overall 13.66 x 13.83 mm: every pad matches. Pin 1 at the left of the terminal row as in the drawing
  • ✓3D body: shell 13.50 x 14.34 x 1.28 mm against width 13.1 +0.4/-0.2, length 14.05 +-0.3, height 1.28 +0.12/-0.1 (p.1); the STEP's overall 14.51 mm includes the two detect-contact tails 0.17 mm beyond the shell. Terminal tails sit on pads 1-8 and the detect tails on pads 9 and 10; Z-up, seated on z = 0
  • ✓DigiKey WM11190TR-ND (tape and reel) and Mouser 538-503398-1892 confirmed by part lookup 2026-10-27 (Molex 5033981892 / 503398-1892)
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencesales drawing (Molex)
Verified files✓ 5033981892.kicad_sym✓ 5033981892.kicad_mod✓ 5033981892.step
9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: CD/DAT3, CD_SWsuperseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: CD/DAT3, CD_SW
9 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded
reviewfor all variants
  • •Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 2: symbol "DAT3/CD" vs datasheet "CD/DAT3"; 9: symbol "DETECT SWITCH" vs datasheet "CD_SW"
9 Oct 2026Claude (AI build)1 of 11 pins have no datasheet description yet (pins 2).superseded
reviewfor all variants
  • •1 of 11 pins have no datasheet description yet (pins 2).
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •10 of 11 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! 5033981892.kicad_sym! 5033981892.kicad_mod✓ 5033981892.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
5033981892 / 5033981892-hero.overlay.json
HistoryDownload
Caleb Publish 0.1.2 081a012 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370
{
  "spec": "adom-hero 1.4",
  "mpn": "5033981892",
  "kind": "component + footprint reference art",
  "board_use": false,
  "plane_z_mm": -0.02,
  "units": "metre",
  "upAxis": "Z",
  "layers": {
    "pad_outlines": {
      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",
      "rgba": [
        0.0,
        0.902,
        0.863,
        0.5
      ],
      "pads": 14,
      "span_mm": 15.87,
      "dash_mm": 0.3968,
      "gap_mm": 0.238,
      "pad_stroke_mm": 0.09
    },
    "silkscreen": {
      "material": "Silkscreen reference lines - 30 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.3
      ],
      "footprint_items": 6,
      "pin1": {
        "source": "added dot (AI)",
        "pad": "1",
        "center_mm": [
          -3.084,
          -5.625
        ],
        "r_mm": 0.154
      }
    },
    "signal_names": {
      "material": "Signal names - 50 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.5
      ],
      "font": "DejaVu Sans Mono",
      "labels": 11,
      "sides": "top + mirrored underside (single-sided)",
      "fallback_to_pad_number": 0
    }
  },
  "align": {
    "ok": true,
    "centre_offset_mm": 0.045,
    "tolerance_mm": 1.106,
    "orientation_flipped": false,
    "contacts_bbox_mm": [
      -6.75,
      6.75,
      -7.17,
      6.3
    ],
    "pads_bbox_mm": [
      -6.83,
      6.83,
      -7.305,
      6.525
    ],
    "seating_z_mm": -0.0
  },
  "sources": {
    "glb": "5033981892.glb",
    "glb_sha256": "6299597b1b62bf21cc25258456c9f0f68c5430830235d7f9b3a71bab922db4a6",
    "footprint": "5033981892.kicad_mod",
    "footprint_sha256": "d3eefdaf86099139256e6dc0828922a94439de76f4ca7a93d8d67d5d1a4d792d",
    "pins": "page.json component.pins",
    "pins_sha256": "0fe3c65f1ef7030b1d9ebe23956000441aedf8c555c188197c864069e7773fd4"
  },
  "generator": "adom-wiki 1.8.0 (component_hero)",
  "labels": [
    {
      "pad": "1",
      "text": "DAT2",
      "x": -2.38,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "2",
      "text": "CD/DAT3",
      "x": -1.28,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "3",
      "text": "CMD",
      "x": -0.18,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "4",
      "text": "VDD",
      "x": 0.92,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "5",
      "text": "CLK",
      "x": 2.02,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "6",
      "text": "Vss",
      "x": 3.12,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "7",
      "text": "DAT0",
      "x": 4.22,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "8",
      "text": "DAT1",
      "x": 5.32,
      "y": -6.312,
      "align": "left",
      "vertical": true,
      "h": 0.55
    },
    {
      "pad": "9",
      "text": "DETECT LEVER",
      "x": -4.17,
      "y": 7.455,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "10",
      "text": "DETECT SWITCH",
      "x": 0.095,
      "y": 7.455,
      "align": "right",
      "vertical": true,
      "h": 0.6
    },
    {
      "pad": "11",
      "text": "SHELL",
      "x": -6.98,
      "y": 5.64,
      "align": "right",
      "vertical": false,
      "h": 0.6
    }
  ],
  "pads": [
    {
      "number": "1",
      "shape": "rect",
      "center_mm": [
        -2.38,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "2",
      "shape": "rect",
      "center_mm": [
        -1.28,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "3",
      "shape": "rect",
      "center_mm": [
        -0.18,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "4",
      "shape": "rect",
      "center_mm": [
        0.92,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "5",
      "shape": "rect",
      "center_mm": [
        2.02,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "6",
      "shape": "rect",
      "center_mm": [
        3.12,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "7",
      "shape": "rect",
      "center_mm": [
        4.22,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "8",
      "shape": "rect",
      "center_mm": [
        5.32,
        -5.625
      ],
      "size_mm": [
        0.7,
        1.1
      ],
      "rot": 0.0
    },
    {
      "number": "9",
      "shape": "rect",
      "center_mm": [
        -4.17,
        6.84
      ],
      "size_mm": [
        0.9,
        0.93
      ],
      "rot": 0.0
    },
    {
      "number": "10",
      "shape": "rect",
      "center_mm": [
        0.095,
        6.915
      ],
      "size_mm": [
        1.05,
        0.78
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "rect",
      "center_mm": [
        -6.48,
        5.64
      ],
      "size_mm": [
        0.7,
        3.33
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "rect",
      "center_mm": [
        -6.26,
        -5.61
      ],
      "size_mm": [
        1.14,
        1.83
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "rect",
      "center_mm": [
        6.4,
        -5.125
      ],
      "size_mm": [
        0.86,
        2.8
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "rect",
      "center_mm": [
        6.48,
        5.64
      ],
      "size_mm": [
        0.7,
        3.33
      ],
      "rot": 0.0
    }
  ]
}