main
History Download
Ray Publish 0.1.0 453e67e

436500212

MOLEX · Wire To Board Connector · SMD, P=3mm, SMD horizontal

436500212 from MOLEX, in a SMD, P=3mm, SMD horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Circuit 1 (Molex SD-43650-005: CIRCUIT 1, the right-hand pad seen from the component side).
2 2 passive Circuit 2, the last circuit of the 2-circuit header.

Key specifications

Parameter Value
Manufacturer MOLEX
Package SMD, P=3mm, SMD horizontal
Category Connectors
Pins 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing black 1. HOUSING MATERIAL: LIQUID CRYSTAL POLYMER, GLASS FILLED, UL94V-0, COLOR: BLACK 1
contacts gold B = .000015/(0.00038) MIN. SELECT GOLD IN CONTACT AREA 1.181 1

CAD (Adom-generated)

  • Symbol: 436500212
  • Footprint: Adom_Gen:Molex_436500212_1dd51e
  • 3D model: generated to fit the land (STEP)
  • 3D model files: 436500212-etched.step / 436500212-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 436500212.step / 436500212.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MOLEX datasheet (2 pp, sha256 145bb802dc5b5a4b, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Molex SD-43650-005 rev E9 (Micro-Fit 3.0 right angle SMT nails, single row) sheet 1 'PCB LAYOUT: COMPONENT SIDE', 2 circuits (43650-0212, finish A): signal pads .050 [1.27] x .115 [2.92] at .118 [3.00] (B = 3.00), CIRCUIT 1 on the right, LAST CIRCUIT on the left; metal nail pads .135 [3.43] x .065 [1.65], outer edges C = .559 [14.20] apart (5.60 from the last circuit's centre), centres .273 [6.93] below the signal pads' top edge. Housing outline (dashed) A = 9.65 x .390 [9.90], starting 1.50 below the signal-pad tops; housing height .172 [4.37] (+1.20 latch). Note 8: keep the hatched areas next to the nails free of exposed traces and vias. Model: gen_pkg3d CONN_SMT (housing plus contact tails from the housing edge to each pad outside it), housing height .172 [4.37] from the drawing.

Datasheet PDF