Generated by adom_assets · KiCad file format 20240108
436500212
MOLEX · Wire To Board Connector · SMD, P=3mm, SMD horizontal
436500212 from MOLEX, in a SMD, P=3mm, SMD horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Circuit 1 (Molex SD-43650-005: CIRCUIT 1, the right-hand pad seen from the component side). |
| 2 | 2 | passive | Circuit 2, the last circuit of the 2-circuit header. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MOLEX |
| Package | SMD, P=3mm, SMD horizontal |
| Category | Connectors |
| Pins | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | black | 1. HOUSING MATERIAL: LIQUID CRYSTAL POLYMER, GLASS FILLED, UL94V-0, COLOR: BLACK | 1 | |
| contacts | gold | B = .000015/(0.00038) MIN. SELECT GOLD IN CONTACT AREA 1.181 | 1 |
CAD (Adom-generated)
- Symbol:
436500212 - Footprint:
Adom_Gen:Molex_436500212_1dd51e - 3D model: generated to fit the land (STEP)
- 3D model files:
436500212-etched.step/436500212-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);436500212.step/436500212.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MOLEX datasheet (2 pp, sha256
145bb802dc5b5a4b, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Molex SD-43650-005 rev E9 (Micro-Fit 3.0 right angle SMT nails, single row) sheet 1 'PCB LAYOUT: COMPONENT SIDE', 2 circuits (43650-0212, finish A): signal pads .050 [1.27] x .115 [2.92] at .118 [3.00] (B = 3.00), CIRCUIT 1 on the right, LAST CIRCUIT on the left; metal nail pads .135 [3.43] x .065 [1.65], outer edges C = .559 [14.20] apart (5.60 from the last circuit's centre), centres .273 [6.93] below the signal pads' top edge. Housing outline (dashed) A = 9.65 x .390 [9.90], starting 1.50 below the signal-pad tops; housing height .172 [4.37] (+1.20 latch). Note 8: keep the hatched areas next to the nails free of exposed traces and vias. Model: gen_pkg3d CONN_SMT (housing plus contact tails from the housing edge to each pad outside it), housing height .172 [4.37] from the drawing.