Generated by kicad-footprint-generator · KiCad file format 20260206
25AA020AT-I
Microchip Tech · EEPROM · SOIC-8
25AA020AT-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | A low level selects the device, and a high level deselects it and forces it into Standby mode. |
| 2 | SO | output | Serial data output that shifts data out after the falling edge of SCK and goes high-impedance when the device is deselected. |
| 3 | WP | input | Hardware write-protect input; when low, all writes to the array or STATUS register are disabled. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SI | input | Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK. |
| 6 | SCK | input | Serial clock input that latches SI on its rising edge and updates SO after its falling edge (maximum clock 10 MHz). |
| 7 | HOLD | input | Hold input that suspends serial communication when pulled low while SCK is low, and must be held high when not used. |
| 8 | VCC | power_in | Supply voltage; 25AA020A operates from 1.8V to 5.5V and 25LC020A from 2.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 2.1 mA | 2 | ||
| Low-Level Output Voltage | VOL | 0.2 | V | IOL = 1.0 mA, VCC < 2.5V | 2 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | CS = VCC, VIN = VSS or VCC | 2 | |
| Output Leakage Current | ILO | -1 | 1 | µA | CS = VCC, VOUT = VSS or VCC | 2 | |
| Internal Capacitance (all inputs and outputs) | CINT | 7 | pF | TA = +25°C, CLK = 1.0 MHz, VCC = 5.0V (Note 1) | 2 | ||
| Read Operating Current | ICC | 5 | mA | VCC = 5.5V; FCLK = 10.0 MHz; SO = Open | 2 | ||
| Read Operating Current | ICC | 2.5 | mA | VCC = 2.5V; FCLK = 5.0 MHz; SO = Open | 2 | ||
| Write Operating Current | ICC | 5 | mA | VCC = 5.5V | 2 | ||
| Write Operating Current | ICC | 3 | mA | VCC = 2.5V | 2 | ||
| Standby Current | ICCS | 5 | µA | CS = VCC = 5.5V, Inputs tied to VCC or VSS, TA = +125°C | 2 | ||
| Standby Current | ICCS | 1 | µA | CS = VCC = 2.5V, Inputs tied to VCC or VSS, TA = +85°C | 2 | ||
| All inputs and outputs w.r.t. VSS | -0.6 | V | w.r.t. VSS; upper limit printed as VCC +1.0V | 2 | |||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temperature under bias | -40 | 125 | °C | 2 | |||
| Supply voltage VCC | VCC | 1.8 | 5.5 | V | Industrial (I): TA = -40°C to +85°C | 2 | |
| Ambient temperature TA (Industrial) | TA | -40 | 85 | °C | Industrial (I), VCC = 1.8V to 5.5V | 2 | |
| Clock Frequency | FCLK | 10 | MHz | 4.5V VCC 5.5V | 3 | ||
| Clock Frequency | FCLK | 5 | MHz | 2.5V VCC 4.5V | 3 | ||
| Clock Frequency | FCLK | 3 | MHz | 1.8V VCC 2.5V | 3 | ||
| CS Setup Time | TCSS | 50 | ns | 4.5V VCC 5.5V | 3 | ||
| CS Setup Time | TCSS | 100 | ns | 2.5V VCC 4.5V | 3 | ||
| CS Setup Time | TCSS | 150 | ns | 1.8V VCC 2.5V | 3 | ||
| CS Hold Time | TCSH | 100 | ns | 4.5V VCC 5.5V | 3 | ||
| CS Hold Time | TCSH | 200 | ns | 2.5V VCC 4.5V | 3 | ||
| CS Hold Time | TCSH | 250 | ns | 1.8V VCC 2.5V | 3 | ||
| Data Setup Time | Tsu | 10 | ns | 4.5V VCC 5.5V | 3 | ||
| Data Setup Time | Tsu | 20 | ns | 2.5V VCC 4.5V | 3 | ||
| Data Setup Time | Tsu | 30 | ns | 1.8V VCC 2.5V | 3 | ||
| Data Hold Time | THD | 20 | ns | 4.5V VCC 5.5V | 3 | ||
| Data Hold Time | THD | 40 | ns | 2.5V VCC 4.5V | 3 | ||
| Data Hold Time | THD | 50 | ns | 1.8V VCC 2.5V | 3 | ||
| CLK Rise Time | TR | 100 | ns | Note 1 | 3 | ||
| CLK Fall Time | TF | 100 | ns | Note 1 | 3 | ||
| Clock High Time | THI | 50 | ns | 4.5V VCC 5.5V | 3 | ||
| Clock High Time | THI | 100 | ns | 2.5V VCC 4.5V | 3 | ||
| Clock High Time | THI | 150 | ns | 1.8V VCC 2.5V | 3 | ||
| Clock Low Time | TLO | 50 | ns | 4.5V VCC 5.5V | 3 | ||
| Clock Low Time | TLO | 100 | ns | 2.5V VCC 4.5V | 3 | ||
| Clock Low Time | TLO | 150 | ns | 1.8V VCC 2.5V | 3 | ||
| Output Valid from Clock Low | TV | 50 | ns | 4.5V VCC 5.5V | 3 | ||
| Output Valid from Clock Low | TV | 100 | ns | 2.5V VCC 4.5V | 3 | ||
| Output Valid from Clock Low | TV | 160 | ns | 1.8V VCC 2.5V | 3 | ||
| Output Hold Time | THO | 0 | ns | Note 1 | 3 | ||
| Output Disable Time | TDIS | 40 | ns | 4.5V VCC 5.5V (Note 1) | 3 | ||
| Output Disable Time | TDIS | 80 | ns | 2.5V VCC 4.5V (Note 1) | 3 | ||
| Output Disable Time | TDIS | 160 | ns | 1.8V VCC 2.5V (Note 1) | 3 | ||
| HOLD Setup Time | THS | 20 | ns | 4.5V VCC 5.5V | 3 | ||
| HOLD Setup Time | THS | 40 | ns | 2.5V VCC 4.5V | 3 | ||
| HOLD Setup Time | THS | 80 | ns | 1.8V VCC 2.5V | 3 | ||
| HOLD Hold Time | THH | 20 | ns | 4.5V VCC 5.5V | 4 | ||
| HOLD Hold Time | THH | 40 | ns | 2.5V VCC 4.5V | 4 | ||
| HOLD Hold Time | THH | 80 | ns | 1.8V VCC 2.5V | 4 | ||
| HOLD Low to Output High-Z | THZ | 30 | ns | 4.5V VCC 5.5V (Note 1) | 4 | ||
| HOLD Low to Output High-Z | THZ | 60 | ns | 2.5V VCC 4.5V (Note 1) | 4 | ||
| HOLD Low to Output High-Z | THZ | 160 | ns | 1.8V VCC 2.5V (Note 1) | 4 | ||
| HOLD High to Output Valid | THV | 30 | ns | 4.5V VCC 5.5V | 4 | ||
| HOLD High to Output Valid | THV | 60 | ns | 2.5V VCC 4.5V | 4 | ||
| HOLD High to Output Valid | THV | 160 | ns | 1.8V VCC 2.5V | 4 | ||
| Internal Write Cycle Time (byte or page) | TWC | 5 | ms | Note 2 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
CAD (KiCad official)
- Symbol:
25AA020AT-I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
25aa020at-i-etched.step/25aa020at-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);25aa020at-i.step/25aa020at-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
9ba38afe24fab4b9, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).