Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

25AA020AT-I

Microchip Tech · EEPROM · SOIC-8

25AA020AT-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input A low level selects the device, and a high level deselects it and forces it into Standby mode.
2 SO output Serial data output that shifts data out after the falling edge of SCK and goes high-impedance when the device is deselected.
3 WP input Hardware write-protect input; when low, all writes to the array or STATUS register are disabled.
4 VSS power_in Ground reference for the device.
5 SI input Serial data input that receives instructions, addresses and data, latched on the rising edge of SCK.
6 SCK input Serial clock input that latches SI on its rising edge and updates SO after its falling edge (maximum clock 10 MHz).
7 HOLD input Hold input that suspends serial communication when pulled low while SCK is low, and must be held high when not used.
8 VCC power_in Supply voltage; 25AA020A operates from 1.8V to 5.5V and 25LC020A from 2.5V to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Low-Level Output Voltage VOL 0.4 V IOL = 2.1 mA 2
Low-Level Output Voltage VOL 0.2 V IOL = 1.0 mA, VCC < 2.5V 2
Input Leakage Current ILI -1 1 µA CS = VCC, VIN = VSS or VCC 2
Output Leakage Current ILO -1 1 µA CS = VCC, VOUT = VSS or VCC 2
Internal Capacitance (all inputs and outputs) CINT 7 pF TA = +25°C, CLK = 1.0 MHz, VCC = 5.0V (Note 1) 2
Read Operating Current ICC 5 mA VCC = 5.5V; FCLK = 10.0 MHz; SO = Open 2
Read Operating Current ICC 2.5 mA VCC = 2.5V; FCLK = 5.0 MHz; SO = Open 2
Write Operating Current ICC 5 mA VCC = 5.5V 2
Write Operating Current ICC 3 mA VCC = 2.5V 2
Standby Current ICCS 5 µA CS = VCC = 5.5V, Inputs tied to VCC or VSS, TA = +125°C 2
Standby Current ICCS 1 µA CS = VCC = 2.5V, Inputs tied to VCC or VSS, TA = +85°C 2
All inputs and outputs w.r.t. VSS -0.6 V w.r.t. VSS; upper limit printed as VCC +1.0V 2
Storage temperature -65 150 °C 2
Ambient temperature under bias -40 125 °C 2
Supply voltage VCC VCC 1.8 5.5 V Industrial (I): TA = -40°C to +85°C 2
Ambient temperature TA (Industrial) TA -40 85 °C Industrial (I), VCC = 1.8V to 5.5V 2
Clock Frequency FCLK 10 MHz 4.5V VCC 5.5V 3
Clock Frequency FCLK 5 MHz 2.5V VCC 4.5V 3
Clock Frequency FCLK 3 MHz 1.8V VCC 2.5V 3
CS Setup Time TCSS 50 ns 4.5V VCC 5.5V 3
CS Setup Time TCSS 100 ns 2.5V VCC 4.5V 3
CS Setup Time TCSS 150 ns 1.8V VCC 2.5V 3
CS Hold Time TCSH 100 ns 4.5V VCC 5.5V 3
CS Hold Time TCSH 200 ns 2.5V VCC 4.5V 3
CS Hold Time TCSH 250 ns 1.8V VCC 2.5V 3
Data Setup Time Tsu 10 ns 4.5V VCC 5.5V 3
Data Setup Time Tsu 20 ns 2.5V VCC 4.5V 3
Data Setup Time Tsu 30 ns 1.8V VCC 2.5V 3
Data Hold Time THD 20 ns 4.5V VCC 5.5V 3
Data Hold Time THD 40 ns 2.5V VCC 4.5V 3
Data Hold Time THD 50 ns 1.8V VCC 2.5V 3
CLK Rise Time TR 100 ns Note 1 3
CLK Fall Time TF 100 ns Note 1 3
Clock High Time THI 50 ns 4.5V VCC 5.5V 3
Clock High Time THI 100 ns 2.5V VCC 4.5V 3
Clock High Time THI 150 ns 1.8V VCC 2.5V 3
Clock Low Time TLO 50 ns 4.5V VCC 5.5V 3
Clock Low Time TLO 100 ns 2.5V VCC 4.5V 3
Clock Low Time TLO 150 ns 1.8V VCC 2.5V 3
Output Valid from Clock Low TV 50 ns 4.5V VCC 5.5V 3
Output Valid from Clock Low TV 100 ns 2.5V VCC 4.5V 3
Output Valid from Clock Low TV 160 ns 1.8V VCC 2.5V 3
Output Hold Time THO 0 ns Note 1 3
Output Disable Time TDIS 40 ns 4.5V VCC 5.5V (Note 1) 3
Output Disable Time TDIS 80 ns 2.5V VCC 4.5V (Note 1) 3
Output Disable Time TDIS 160 ns 1.8V VCC 2.5V (Note 1) 3
HOLD Setup Time THS 20 ns 4.5V VCC 5.5V 3
HOLD Setup Time THS 40 ns 2.5V VCC 4.5V 3
HOLD Setup Time THS 80 ns 1.8V VCC 2.5V 3
HOLD Hold Time THH 20 ns 4.5V VCC 5.5V 4
HOLD Hold Time THH 40 ns 2.5V VCC 4.5V 4
HOLD Hold Time THH 80 ns 1.8V VCC 2.5V 4
HOLD Low to Output High-Z THZ 30 ns 4.5V VCC 5.5V (Note 1) 4
HOLD Low to Output High-Z THZ 60 ns 2.5V VCC 4.5V (Note 1) 4
HOLD Low to Output High-Z THZ 160 ns 1.8V VCC 2.5V (Note 1) 4
HOLD High to Output Valid THV 30 ns 4.5V VCC 5.5V 4
HOLD High to Output Valid THV 60 ns 2.5V VCC 4.5V 4
HOLD High to Output Valid THV 160 ns 1.8V VCC 2.5V 4
Internal Write Cycle Time (byte or page) TWC 5 ms Note 2 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 25

CAD (KiCad official)

  • Symbol: 25AA020AT-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: 25aa020at-i-etched.step / 25aa020at-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 25aa020at-i.step / 25aa020at-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (42 pp, sha256 9ba38afe24fab4b9, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF