component

24LC00T-I

Public Made by Adom

by adom

Microchip Tech EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemory24lc00t-ifactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
24lc00t-i / README.md
History Download
Ray Publish 0.1.0 2937040 8h ago

24LC00T-I

Microchip Tech · EEPROM · SOT-23-5

24LC00T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial clock input that synchronizes data transfer to and from the device, with Schmitt Trigger input and noise-spike filtering on the SCL and SDA inputs.
2 VSS power_in Ground reference for the device.
3 SDA bidirectional Open-drain serial address/data I/O that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz, 2 kΩ for 400 kHz) and may change only while SCL is low for normal data transfer.
4 NC unconnected Not connected.
5 VCC power_in Power supply; the 24LC00 operates from 2.5 V to 5.5 V per the device selection table (the pin table gives +1.8 V to 5.5 V for the family).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Memory
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (24LC00 device range) VCC 2.5 5.5 V 24LC00 device range per Device Selection Table 1
Operating ambient temperature, Industrial (I) TA -40 85 °C Temp range I 1
All inputs and outputs w.r.t. VSS -0.6 1 V Max printed as VCC +1.0V 2
Storage temperature -65 150 °C 2
Ambient temperature with power applied -40 125 °C 2
ESD protection on all pins 4 kV 2
High-level input voltage, SCL and SDA VIH 0.7 VCC (Note) 2
Low-level input voltage, SCL and SDA VIL 0.3 VCC (Note) 2
Hysteresis of Schmitt Trigger inputs VHYS 0.05 VCC VCC ≥ 2.5V (Note) 2
Low-level output voltage VOL 0.4 V IOL = 3.0 mA, VCC = 4.5V 2
Input leakage current ILI -1 1 µA VIN = VCC or VSS 2
Output leakage current ILO -1 1 µA VOUT = VCC or VSS 2
Pin capacitance (all inputs/outputs) CIN, COUT 10 pF VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz 2
Operating current, write ICC Write 2 mA VCC = 5.5V, SCL = 400 kHz 2
Operating current, read ICC Read 1 mA VCC = 5.5V, SCL = 400 kHz 2
Standby current ICCS 1 µA VCC = 5.5V, SDA = SCL = VCC 2
Clock frequency FCLK 100 kHz 1.8V ≤ VCC ≤ 4.5V 3
Clock frequency FCLK 400 kHz 4.5V ≤ VCC ≤ 5.5V 3
Clock high time THIGH 4000 ns 1.8V ≤ VCC ≤ 4.5V 3
Clock high time THIGH 600 ns 4.5V ≤ VCC ≤ 5.5V 3
Clock low time TLOW 4700 ns 1.8V ≤ VCC ≤ 4.5V 3
Clock low time TLOW 1300 ns 4.5V ≤ VCC ≤ 5.5V 3
SDA and SCL rise time TR 1000 ns 1.8V ≤ VCC ≤ 4.5V (Note 1) 3
SDA and SCL rise time TR 300 ns 4.5V ≤ VCC ≤ 5.5V (Note 1) 3
SDA and SCL fall time TF 300 ns (Note 1) 3
Start condition hold time THD:STA 4000 ns 1.8V ≤ VCC ≤ 4.5V 3
Start condition hold time THD:STA 600 ns 4.5V ≤ VCC ≤ 5.5V 3
Start condition setup time TSU:STA 4700 ns 1.8V ≤ VCC ≤ 4.5V 3
Start condition setup time TSU:STA 600 ns 4.5V ≤ VCC ≤ 5.5V 3
Data input hold time THD:DAT 0 ns (Note 2) 3
Data input setup time TSU:DAT 250 ns 1.8V ≤ VCC ≤ 4.5V 3
Data input setup time TSU:DAT 100 ns 4.5V ≤ VCC ≤ 5.5V 3
Stop condition setup time TSU:STO 4000 ns 1.8V ≤ VCC ≤ 4.5V 3
Stop condition setup time TSU:STO 600 ns 4.5V ≤ VCC ≤ 5.5V 3
Output valid from clock TAA 3500 ns 1.8V ≤ VCC ≤ 4.5V (Note 2) 3
Output valid from clock TAA 900 ns 4.5V ≤ VCC ≤ 5.5V (Note 2) 3
Bus free time TBUF 4700 ns 1.8V ≤ VCC ≤ 4.5V 3
Bus free time TBUF 1300 ns 4.5V ≤ VCC ≤ 5.5V 3
Output fall time from VIH minimum to VIL maximum TOF 250 ns (Note 1), CB ≤ 100 pF; min printed as 20+0.1CB 3
Input filter spike suppression (SDA and SCL pins) TSP 50 ns (Notes 1, 3) 3
Write cycle time TWC 4 ms 3
Endurance 1 M cycles (Note 4) 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Package: P = Plastic DIP (300 mil body), 8-lead SN = Plastic SOIC (3.90 mm body), 8-lead 31

CAD (KiCad official)

  • Symbol: 24LC00T-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: 24lc00t-i-etched.step / 24lc00t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24lc00t-i.step / 24lc00t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (34 pp, sha256 6e40fd9cafa0cec4, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF