main
Ray
Publish 0.1.0
34e38fc
24CW1280T-I
Microchip Tech · Pre-ordered Chips · SOT-23-5
24CW1280T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial data pin that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz and 1 MHz); SDA may change only while SCL is low except for Start and Stop conditions. |
| 4 | VCC | power_in | Device power supply, operating from 1.6 V to 5.5 V. |
| 5 | NC | unconnected | No connect pin, listed as NC in the pin function table for the 5-Lead SOT-23 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 2.1 mA, VCC = 3.0V | 4 | ||
| Low-Level Output Voltage | VOL | 0.2 | V | IOL = 0.15 mA, VCC = 1.8V | 4 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = VSS or VCC | 4 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VOUT =VSS or VCC | 4 | |
| Internal Capacitance (all inputs and outputs) | CINT | 7 | pF | TAMB = +25°C, FCLK = 1 MHz, VCC = 5.5V (Note 1) | 4 | ||
| Operating Current | ICCREAD | 0.3 | mA | VCC = 1.8V, FCLK = 400 kHz | 4 | ||
| Operating Current | ICCREAD | 1 | mA | VCC = 5.5V, FCLK = 1 MHz | 4 | ||
| Standby Current | ICCS | 0.5 | µA | SCL = SDA = VCC = 1.8V | 4 | ||
| Standby Current | ICCS | 1 | µA | SCL = SDA = VCC = 5.5V | 4 | ||
| Clock Frequency | FCLK | 1000 | kHz | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Clock High Time | THIGH | 260 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Clock Low Time | TLOW | 500 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| SDA and SCL Rise Time | TR | 1000 | ns | 1.6V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| SDA and SCL Fall Time | TF | 300 | ns | 1.6V ≤ VCC ≤ 5.5V (Note 1) | 5 | ||
| Start Condition Hold Time | THD:STA | 260 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Start Condition Setup Time | TSU:STA | 260 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Data Input Hold Time | THD:DAT | 0 | ns | (Note 2) | 5 | ||
| Data Input Setup Time | TSU:DAT | 50 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Stop Condition Setup Time | TSU:STO | 260 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Output Valid from Clock | TAA | 450 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Bus Free Time: Bus Time must be Free before a New Transmission can Start | TBUF | 500 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 | ||
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | 50 | ns | (Note 3) | 5 | ||
| Write Cycle Time (byte or page) | TWC | 5 | ms | 5 | |||
| Write Endurance | 1e+06 | Write Cycles | TA = 25°C, 1.6V VCC 5.5V | 5 | |||
| Data Retention | 200 | Years | TA = 55°C | 5 | |||
| Time Required after VCC is Stable before the Device can Accept Commands | TPUP | 100 | µs | 6 | |||
| Power-on Reset Threshold Voltage | VPOR | 1.5 | V | 6 | |||
| Minimum Time at VCC = 0V between Power Cycles | TPOFF | 1 | ms | 6 | |||
| Supply voltage | VCC | 1.6 | 5.5 | V | Industrial (I) grade | 4 | |
| Ambient temperature | TA | -40 | 85 | °C | Industrial (I) grade | 4 | |
| Supply voltage | VCC | 6.5 | V | 4 | |||
| All inputs and outputs w.r.t. VSS | -0.6 | 6.5 | V | 4 | |||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Ambient temperature under bias | -40 | 85 | °C | 4 | |||
| ESD protection on all pins | 4 | kV | Printed as >4 kV | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package: SN = 8-Lead Plastic Small Outline, Narrow, 3.90 mm Body | 48 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
24CW1280T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
24cw1280t-i-ot-etched.step/24cw1280t-i-ot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);24cw1280t-i-ot.step/24cw1280t-i-ot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
213f52757c654a29, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# 24CW1280T-I
**Microchip Tech** · Pre-ordered Chips · SOT-23-5
24CW1280T-I from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCL | input | Serial clock input used to synchronize data transfer to and from the device. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | SDA | bidirectional | Open-drain serial data pin that requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz and 1 MHz); SDA may change only while SCL is low except for Start and Stop conditions. |
| 4 | VCC | power_in | Device power supply, operating from 1.6 V to 5.5 V. |
| 5 | NC | unconnected | No connect pin, listed as NC in the pin function table for the 5-Lead SOT-23 package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Low-Level Output Voltage | VOL | | | 0.4 | V | IOL = 2.1 mA, VCC = 3.0V | 4 |
| Low-Level Output Voltage | VOL | | | 0.2 | V | IOL = 0.15 mA, VCC = 1.8V | 4 |
| Input Leakage Current | ILI | -1 | | 1 | µA | VIN = VSS or VCC | 4 |
| Output Leakage Current | ILO | -1 | | 1 | µA | VOUT =VSS or VCC | 4 |
| Internal Capacitance (all inputs and outputs) | CINT | | | 7 | pF | TAMB = +25°C, FCLK = 1 MHz, VCC = 5.5V (Note 1) | 4 |
| Operating Current | ICCREAD | | | 0.3 | mA | VCC = 1.8V, FCLK = 400 kHz | 4 |
| Operating Current | ICCREAD | | | 1 | mA | VCC = 5.5V, FCLK = 1 MHz | 4 |
| Standby Current | ICCS | | | 0.5 | µA | SCL = SDA = VCC = 1.8V | 4 |
| Standby Current | ICCS | | | 1 | µA | SCL = SDA = VCC = 5.5V | 4 |
| Clock Frequency | FCLK | | | 1000 | kHz | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Clock High Time | THIGH | 260 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Clock Low Time | TLOW | 500 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| SDA and SCL Rise Time | TR | | | 1000 | ns | 1.6V ≤ VCC ≤ 5.5V (Note 1) | 5 |
| SDA and SCL Fall Time | TF | | | 300 | ns | 1.6V ≤ VCC ≤ 5.5V (Note 1) | 5 |
| Start Condition Hold Time | THD:STA | 260 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Start Condition Setup Time | TSU:STA | 260 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Data Input Hold Time | THD:DAT | 0 | | | ns | (Note 2) | 5 |
| Data Input Setup Time | TSU:DAT | 50 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Stop Condition Setup Time | TSU:STO | 260 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Output Valid from Clock | TAA | | | 450 | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Bus Free Time: Bus Time must be Free before a New Transmission can Start | TBUF | 500 | | | ns | 1.6V ≤ VCC ≤ 5.5V | 5 |
| Input Filter Spike Suppression (SDA and SCL pins) | TSP | | | 50 | ns | (Note 3) | 5 |
| Write Cycle Time (byte or page) | TWC | | | 5 | ms | | 5 |
| Write Endurance | | 1e+06 | | | Write Cycles | TA = 25°C, 1.6V VCC 5.5V | 5 |
| Data Retention | | 200 | | | Years | TA = 55°C | 5 |
| Time Required after VCC is Stable before the Device can Accept Commands | TPUP | 100 | | | µs | | 6 |
| Power-on Reset Threshold Voltage | VPOR | | | 1.5 | V | | 6 |
| Minimum Time at VCC = 0V between Power Cycles | TPOFF | 1 | | | ms | | 6 |
| Supply voltage | VCC | 1.6 | | 5.5 | V | Industrial (I) grade | 4 |
| Ambient temperature | TA | -40 | | 85 | °C | Industrial (I) grade | 4 |
| Supply voltage | VCC | | | 6.5 | V | | 4 |
| All inputs and outputs w.r.t. VSS | | -0.6 | | 6.5 | V | | 4 |
| Storage temperature | | -65 | | 150 | °C | | 4 |
| Ambient temperature under bias | | -40 | | 85 | °C | | 4 |
| ESD protection on all pins | | 4 | | | kV | Printed as >4 kV | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Package: SN = 8-Lead Plastic Small Outline, Narrow, 3.90 mm Body | 48 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `24CW1280T-I`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `24cw1280t-i-ot-etched.step` / `24cw1280t-i-ot-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `24cw1280t-i-ot.step` / `24cw1280t-i-ot.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/24cw1280t-i-ot-datasheet.pdf) (50 pp, sha256 `213f52757c654a29`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/24cw1280t-i-ot-datasheet.pdf)