component

24C01BN

Public Made by Adom

by adom

XBLW EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemory24c01bn
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs 24c01bn: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
24c01bn-etched.fit.json 24c01bn: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
24c01bn-etched.glb 24c01bn: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
24c01bn-etched.step 24c01bn: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wit… · Ray
24c01bn-hero.glb 24c01bn: hero from the plain model · Ray
24c01bn-hero.overlay.json 24c01bn: hero from the plain model · Ray
24c01bn.glb Publish 0.1.0 · Ray
24c01bn.kicad_mod Publish 0.1.0 · Ray
24c01bn.kicad_sym Publish 0.1.0 · Ray
24c01bn.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
24c01bn.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md 24c01bn: manufacturer 'XBLW' (was 'XBLW 24C01BN XBLW': the MPN had been folded in) · Ray

24C01BN

XBLW · EEPROM · SOP-8

24C01BN from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input bit 0. Hardwire to VIH or VIL to set the chip's slave address; if left unconnected it is internally recognized as VIL, but a 10 kΩ or smaller pull-up/pull-down to a known state is recommended to avoid capacitive coupling.
2 A1 input Device address input bit 1. Hardwire to VIH or VIL to set the chip's slave address; internally pulled to VIL if left floating, 10 kΩ or smaller pull-up/pull-down recommended.
3 A2 input Device address input bit 2. Hardwire to VIH or VIL to set the chip's slave address; internally pulled to VIL if left floating, 10 kΩ or smaller pull-up/pull-down recommended.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Serial data input / open-drain output for the 2-wire (I2C-compatible) bus. Requires an external pull-up resistor; can be wire-OR'd with other open-drain devices on the same bus.
6 SCL input Serial clock input for the 2-wire (I2C-compatible) bus. Rising edge latches data into the EEPROM; falling edge clocks data out. Supports up to 1 MHz at 2.5-5V or 400 kHz at 1.8V.
7 WP input Write-protect input. Tie to VIH or Vcc to disable all programming operations (read still works); tie to VIL to allow writes. Internally recognized as VIL if unconnected; 10 kΩ or smaller pull to a known state recommended.
8 VCC power_in Positive supply, 1.8 V to 5.5 V. Standard 100 nF decoupling to GND recommended near the pin.

Key specifications

Parameter Value
Manufacturer XBLW
Package SOP-8
Category Memory
Pins 8

Ordering variants

  • 24C01BN
  • 24C01BNN
  • 24C01BNMN
  • 24C01BNTN
  • 24C01BNDN
  • 24C01BND6
  • 24C01BNS

CAD (KiCad official)

  • Symbol: 24C01BN
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: 24c01bn-etched.step / 24c01bn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24c01bn.step / 24c01bn.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
24c01bn.step 122 KB You want the bare part, or you mark your own boards.
24c01bn-etched.step 1.6 MB You want the part with 24C01BN already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 405 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XBLW datasheet (20 pp, sha256 6d6af116da82cd71, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF