1EDI60N12AF

{
  "schema_version": 1,
  "type": "component",
  "slug": "1edi60n12af",
  "title": "1EDI60N12AF",
  "brief": "Infineon Technologies Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "motor driver ics",
    "1edi60n12af",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "1EDI60N12AF",
    "manufacturer": "Infineon Technologies",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884715147841536",
    "parts": {
      "symbol": "1edi60n12af.kicad_sym",
      "footprint": "1edi60n12af.kicad_mod",
      "model_3d": "1edi60n12af-hero.glb",
      "model_3d_plain": "1edi60n12af-etched.glb",
      "model_3d_step": "1edi60n12af-etched.step",
      "model_3d_step_plain": "1edi60n12af.step",
      "lbr": "1edi60n12af.lbr"
    },
    "distributor_links": {
      "lcsc": "C454268",
      "mouser": "726-1EDI60N12AF"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T06:49:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": "726-1EDI60N12AF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic input supply voltage with a 3.3 V to 15 V wide operating range (Table 3 gives an operating range of 3.1 V to 17 V for VCC1)."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverted driver input (active high) that controls the output when IN- is low, with an internal weak pull-down that favors the off-state and a minimum pulse width to filter noise."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverted driver input (active low) that controls the output when IN+ is high, with an internal weak pull-up that favors the off-state and a minimum pulse width to filter noise."
      },
      {
        "number": "4",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic ground and ground connection of the input circuit, to which the input-side voltages are referenced."
      },
      {
        "number": "5",
        "name": "VCC2",
        "type": "power_in",
        "description": "Positive power supply of the output driving circuit, which needs a blocking capacitor placed close to the pin (operating range 10 V to 35 V referenced to GND2 per Table 3)."
      },
      {
        "number": "6",
        "name": "OUT+",
        "type": "output",
        "description": "Driver source output that turns on the external MOSFET by switching to VCC2 in the on-state, is turned off at a UVLO event, and can sink approximately 100 mA during turn-off."
      },
      {
        "number": "7",
        "name": "OUT-",
        "type": "output",
        "description": "Driver sink output that turns off the external MOSFET by switching to GND2 in the off-state, where an active shut-down keeps the output low during UVLO."
      },
      {
        "number": "8",
        "name": "GND2",
        "type": "power_in",
        "description": "Reference ground of the output driving circuit; in a bipolar supply this pin is connected to the negative supply voltage (e.g. -8 V relative to the MOSFET source in the typical example)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names are taken from Table 1 (Pin Configuration) on page 10, which matches the Figur; The datasheet gives different VCC1 ranges in different places: 3.3 V to 15 V in the pin description "
        ],
        "pages_sent": 22,
        "cost_usd": 0.0802,
        "at": "2026-10-19T06:46:30"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884715147841536",
        "pages": 22,
        "sha256": "e151972a8f8433c8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "1edi60n12af.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "1edi60n12af-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ffa361fbfe3402de767602e43026c5e2db1d6f6977fcad418fb43561d741cfa",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Infineon Technologies",
      "Package": "SO-8",
      "Category": "Motor Driver ICs",
      "Pins": "8"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "e151972a8f8433c833ad5046d0a102241287aca48b982ecc65eeee7613e714ca",
      "rows": [
        {
          "name": "Power supply output side",
          "symbol": "VVCC2",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 40,
          "conditions": "With respect to GND2",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Positive power supply input side",
          "symbol": "VVCC1",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 18,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Logic input voltages (IN+,IN-)",
          "symbol": "VLogicIN",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 18,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Input to output isolation voltage (GND2)",
          "symbol": "VISO",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -1200,
          "typ": null,
          "max": 1200,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "TS",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -55,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation (Input side)",
          "symbol": "PD, IN",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "@TA = 25°C",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation (Output side)",
          "symbol": "PD, OUT",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 400,
          "conditions": "@TA = 25°C",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance (Input side)",
          "symbol": "RTHJA,IN",
          "kind": "thermal",
          "unit": "K/W",
          "min": null,
          "typ": null,
          "max": 145,
          "conditions": "@TA = 85°C",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance (Output side)",
          "symbol": "RTHJA,OUT",
          "kind": "thermal",
          "unit": "K/W",
          "min": null,
          "typ": null,
          "max": 165,
          "conditions": "@TA = 85°C",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "ESD capability",
          "symbol": "VESD,HBM",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": null,
          "typ": null,
          "max": 2,
          "conditions": "Human Body Model",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Power supply output side",
          "symbol": "VVCC2",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 10,
          "typ": null,
          "max": 35,
          "conditions": "With respect to GND2",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Power supply input side",
          "symbol": "VVCC1",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3.1,
          "typ": null,
          "max": 17,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Logic input voltages (IN+,IN-)",
          "symbol": "VLogicIN",
          "kind": "recommended_operating",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 17,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Switching frequency",
          "symbol": "fsw",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "Do not exceed max. power dissipation",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Thermal coefficient, junction-top",
          "symbol": "Ψth,jt",
          "kind": "thermal",
          "unit": "K/W",
          "min": null,
          "typ": null,
          "max": 4.8,
          "conditions": "@TA = 85°C",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Common mode transient immunity (CMTI)",
          "symbol": "|dVISO/dt|",
          "kind": "electrical",
          "unit": "kV/µs",
          "min": null,
          "typ": null,
          "max": 100,
          "conditions": "@ 1000 V",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO threshold input chip (rising)",
          "symbol": "VUVLOH1",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 2.85,
          "max": 3.1,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO threshold input chip (falling)",
          "symbol": "VUVLOL1",
          "kind": "electrical",
          "unit": "V",
          "min": 2.55,
          "typ": 2.75,
          "max": null,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO hysteresis input chip (VUVLOH1 - VUVLOL1)",
          "symbol": "VHYS1",
          "kind": "electrical",
          "unit": "mV",
          "min": 90,
          "typ": 100,
          "max": null,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO threshold output chip MOSFET supply (rising)",
          "symbol": "VUVLOH2",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 9.1,
          "max": 10,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO threshold output chip MOSFET supply (falling)",
          "symbol": "VUVLOL2",
          "kind": "electrical",
          "unit": "V",
          "min": 8,
          "typ": 8.5,
          "max": null,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "UVLO hysteresis output chip (VUVLOH2 - VUVLOL2)",
          "symbol": "VHYS2",
          "kind": "electrical",
          "unit": "mV",
          "min": 550,
          "typ": 600,
          "max": null,
          "conditions": "",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "IN+,IN- low input voltage (relative to VCC1)",
          "symbol": "VIN+L, VIN-L",
          "kind": "electrical",
          "unit": "% of VCC1",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "IN+,IN- high input voltage (relative to VCC1)",
          "symbol": "VIN+H, VIN-H",
          "kind": "electrical",
          "unit": "% of VCC1",
          "min": 70,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "IN+,IN- low input voltage",
          "symbol": "VIN+L, VIN-L",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.5,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "IN+,IN- high input voltage",
          "symbol": "VIN+H, VIN-H",
          "kind": "electrical",
          "unit": "V",
          "min": 3.5,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "IN- input current",
          "symbol": "IIN-",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 70,
          "max": 200,
          "conditions": "VIN- = GND1",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "IN+ input current",
          "symbol": "IIN+",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 70,
          "max": 200,
          "conditions": "VIN+ = VCC1",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Quiescent current input chip",
          "symbol": "IQ1",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.65,
          "max": 1,
          "conditions": "VVCC1 = 5 V, IN+ = High, IN- = Low => OUT = High",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Quiescent current output chip",
          "symbol": "IQ2",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.2,
          "max": 2,
          "conditions": "VVCC2 = 15 V, IN+ = High, IN- = Low => OUT = High",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "High level output peak current",
          "symbol": "IOUT+,PEAK",
          "kind": "electrical",
          "unit": "A",
          "min": 6,
          "typ": null,
          "max": 10,
          "conditions": "IN+ = High, IN- = Low, VVCC2 = 15 V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Low level output peak current",
          "symbol": "IOUT-,PEAK",
          "kind": "electrical",
          "unit": "A",
          "min": 6,
          "typ": null,
          "max": 9.4,
          "conditions": "IN+ = Low, IN- = Low, VVCC2 = 15 V",
          "source_page": 16,
          "source": "datasheet"
        },
        {
          "name": "Clamping voltage (OUT+) (VOUT - VVCC2)",
          "symbol": "VCLPout",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 0.9,
          "max": 1.3,
          "conditions": "IN+ = High, IN- = Low, OUT = High, IOUT = 500 mA pulse test, tCLPmax = 10 µs",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Input IN to output propagation delay ON",
          "symbol": "TPDON",
          "kind": "timing",
          "unit": "ns",
          "min": 95,
          "typ": 120,
          "max": 142,
          "conditions": "CLOAD = 100 pF, VIN+ = 50%, VOUT = 50% @ 25°C",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Input IN to output propagation delay OFF",
          "symbol": "TPDOFF",
          "kind": "timing",
          "unit": "ns",
          "min": 105,
          "typ": 125,
          "max": 150,
          "conditions": "CLOAD = 100 pF, VIN+ = 50%, VOUT = 50% @ 25°C",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Input IN to output propagation delay distortion (TPDOFF - TPDON)",
          "symbol": "TPDISTO",
          "kind": "timing",
          "unit": "ns",
          "min": -15,
          "typ": 5,
          "max": 25,
          "conditions": "",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Input pulse suppression IN+, IN-",
          "symbol": "TMININ+, TMININ-",
          "kind": "timing",
          "unit": "ns",
          "min": 30,
          "typ": 40,
          "max": null,
          "conditions": "",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "IN input to output propagation delay ON variation due to temperature",
          "symbol": "TPDONt",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "CLOAD = 100 pF, VIN+ = 50%, VOUT = 50%",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "IN input to output propagation delay OFF variation due to temperature",
          "symbol": "TPDOFFt",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "CLOAD = 100 pF, VIN+ = 50%, VOUT = 50%",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "IN input to output propagation delay distortion variation due to temperature (TPDOFF-TPDON)",
          "symbol": "TPDISTOt",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 4,
          "conditions": "CLOAD = 100 pF, VIN+ = 50%, VOUT = 50%",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Rise time",
          "symbol": "TRISE",
          "kind": "timing",
          "unit": "ns",
          "min": 5,
          "typ": 10,
          "max": 20,
          "conditions": "CLOAD = 1 nF, VL 20%, VH 80%",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Fall time",
          "symbol": "TFALL",
          "kind": "timing",
          "unit": "ns",
          "min": 4,
          "typ": 9,
          "max": 19,
          "conditions": "CLOAD = 1 nF, VL 20%, VH 80%",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "Active shut down voltage",
          "symbol": "VACTSD",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 2.2,
          "max": 2.5,
          "conditions": "IOUT-/IOUT-,PEAK = 0.1, VCC2 open",
          "source_page": 18,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "1edi60n12af"
  ],
  "discovery_pitch": "1EDI60N12AF (Infineon Technologies) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "1edi60n12af.kicad_sym",
    "1edi60n12af.kicad_mod",
    "1edi60n12af.glb",
    "1edi60n12af.step",
    "1edi60n12af.lbr",
    "docs/hero.png",
    "docs/1edi60n12af-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "1edi60n12af-hero.glb",
    "1edi60n12af-hero.overlay.json",
    "1edi60n12af-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}