1EDI60N12AF

{
  "slug": "1edi60n12af",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "motor driver ics",
    "1edi60n12af",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "1edi60n12af.kicad_sym",
    "1edi60n12af.kicad_mod",
    "1edi60n12af.glb",
    "1edi60n12af.step",
    "1edi60n12af.lbr",
    "docs/hero.png",
    "docs/1edi60n12af-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "1edi60n12af-hero.glb",
    "1edi60n12af-hero.overlay.json",
    "1edi60n12af-etched.glb"
  ],
  "component": {
    "mpn": "1EDI60N12AF",
    "manufacturer": "Infineon Technologies",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Motor Driver ICs",
    "subcategory": "Gate Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884715147841536",
    "parts": {
      "symbol": "1edi60n12af.kicad_sym",
      "footprint": "1edi60n12af.kicad_mod",
      "model_3d": "1edi60n12af-hero.glb",
      "model_3d_plain": "1edi60n12af-etched.glb",
      "model_3d_step": "1edi60n12af-etched.step",
      "model_3d_step_plain": "1edi60n12af.step",
      "lbr": "1edi60n12af.lbr"
    },
    "distributor_links": {
      "lcsc": "C454268",
      "mouser": "726-1EDI60N12AF"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T06:49:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": "726-1EDI60N12AF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC1",
        "type": "power_in",
        "description": "Logic input supply voltage with a 3.3 V to 15 V wide operating range (Table 3 gives an operating range of 3.1 V to 17 V for VCC1)."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverted driver input (active high) that controls the output when IN- is low, with an internal weak pull-down that favors the off-state and a minimum pulse width to filter noise."
      },
      {
        "number": "3",
        "name": "IN-",
        "type": "input",
        "description": "Inverted driver input (active low) that controls the output when IN+ is high, with an internal weak pull-up that favors the off-state and a minimum pulse width to filter noise."
      },
      {
        "number": "4",
        "name": "GND1",
        "type": "power_in",
        "description": "Logic ground and ground connection of the input circuit, to which the input-side voltages are referenced."
      },
      {
        "number": "5",
        "name": "VCC2",
        "type": "power_in",
        "description": "Positive power supply of the output driving circuit, which needs a blocking capacitor placed close to the pin (operating range 10 V to 35 V referenced to GND2 per Table 3)."
      },
      {
        "number": "6",
        "name": "OUT+",
        "type": "output",
        "description": "Driver source output that turns on the external MOSFET by switching to VCC2 in the on-state, is turned off at a UVLO event, and can sink approximately 100 mA during turn-off."
      },
      {
        "number": "7",
        "name": "OUT-",
        "type": "output",
        "description": "Driver sink output that turns off the external MOSFET by switching to GND2 in the off-state, where an active shut-down keeps the output low during UVLO."
      },
      {
        "number": "8",
        "name": "GND2",
        "type": "power_in",
        "description": "Reference ground of the output driving circuit; in a bipolar supply this pin is connected to the negative supply voltage (e.g. -8 V relative to the MOSFET source in the typical example)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names are taken from Table 1 (Pin Configuration) on page 10, which matches the Figur; The datasheet gives different VCC1 ranges in different places: 3.3 V to 15 V in the pin description "
        ],
        "pages_sent": 22,
        "cost_usd": 0.0802,
        "at": "2026-10-19T06:46:30"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884715147841536",
        "pages": 22,
        "sha256": "e151972a8f8433c8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "1edi60n12af.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "1edi60n12af-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ffa361fbfe3402de767602e43026c5e2db1d6f6977fcad418fb43561d741cfa",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}