main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers 1ed3323mc12nxuma1: viewers · Ray
1ed3323mc12nxuma1-etched.glb Publish 0.1.0 · Ray
1ed3323mc12nxuma1-etched.step 1ed3323mc12nxuma1: factory component page (tier=mfr) · Ray
1ed3323mc12nxuma1-hero.glb 1ed3323mc12nxuma1: hero GLB from the etched model (keeps the MPN mark) · Ray
1ed3323mc12nxuma1-hero.overlay.json Publish 0.1.0 · Ray
1ed3323mc12nxuma1.glb Publish 0.1.0 · Ray
1ed3323mc12nxuma1.kicad_mod Publish 0.1.0 · Ray
1ed3323mc12nxuma1.kicad_sym Publish 0.1.0 · Ray
1ed3323mc12nxuma1.lbr Publish 0.1.0 · Ray
1ed3323mc12nxuma1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

1ED3323MC12NXUMA1

Infineon Technologies · Gate Drive ICs · SOIC-16

1ED3323MC12NXUMA1 from Infineon Technologies, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VEE2 power_in Negative power supply pin of the output chip; if no negative supply voltage is available, all VEE2 pins have to be connected to GND2.
2 DESAT input Desaturation detection input monitoring IGBT VCE; when OUT is high, VCE is above a defined value and the blanking time has expired, protection switches the IGBT off, with blanking time set by an external capacitor.
3 GND2 power_in Reference ground of the output chip.
4 NC unconnected Not connected.
5 VCC2 power_in Positive power supply pin of the output side, typically supplied with 15 V in the datasheet's bipolar and unipolar application examples.
6 OUT output Common output pin to charge and discharge the power transistor gate; during error mode (UVLO, internal error or DESAT) and OFF mode OUT is low.
7 CLAMP input Miller clamp that ties the gate voltage to VEE2 after turn-off once the gate voltage falls below VCLAMP (related to VEE2), designed for a Miller current up to 2 A.
8 VEE2 power_in Negative power supply pin of the output chip; if no negative supply voltage is available, all VEE2 pins have to be connected to GND2.
9 GND1 power_in Ground connection of the input side.
10 IN+ input Non-inverting driver input; the power transistor is on when IN+ is high and IN- is low, a minimum pulse width is defined for glitch robustness, and an internal pull-down ensures the output is low.
11 IN- input Inverting driver input; the power transistor is on when IN- is low and IN+ is high, a minimum pulse width is defined for glitch robustness, and an internal pull-up ensures the output is low.
12 RDY output Open-drain ready status output that is high when both chips are above the UVLO level and the internal chip transmission is faultless.
13 /FLT output Open-drain fault output, low active, which goes low when a desaturation fault of the power transistor occurs.
14 /RST input Reset input, low active: the power transistor is off when /RST is low, and holding it low for time tRST resets the DESAT fault state; an internal pull-up ensures the /FLT status output.
15 VCC1 power_in 5 V or 3.3 V power supply of the input chip.
16 GND1 power_in Ground connection of the input side.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SOIC-16
Category Power Management
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Positive power supply output side voltage VVCC2 -0.3 40 V in respect to GND2 (note 1) 18
Negative power supply output side voltage VVEE2 -22 0.3 V in respect to GND2 (note 1) 18
Maximum power supply voltage difference output side Vmax2 -0.3 40 V in respect to VEE2 (note 2) 18
Gate driver output current (1ED3323) IOUT -9 9 A t = 1 µs on, 5 µs period; not production tested (notes 3, 4) 18
CLAMP output current ICLAMP -4.5 4.5 A t = 1 µs on, 5 µs period; not production tested (notes 3, 4) 18
Positive power supply voltage input side VVCC1 -0.3 7 V in respect to GND1 (note 5) 18
Logic input voltages IN+, IN-, /RST VLogicIN -0.3 V in respect to GND1 (note 5); upper limit printed as VVCC1 + 0.3 18
Open drain output current /FLT, RDY IFLT, IRDY 10 mA open drain output in low state, output voltage <= VVCC1 18
DESAT voltage VDESAT -0.3 V in respect to GND2; IDESAT limited <= 5 mA (note 4); upper limit printed as VVCC2 + 0.3 18
Input to output offset voltage VOFFSET 2300 V VVEE2,max - VVEE2,min with VVEE2,max >= VGND1 >= VVEE2,min; for functional operation only (note 6) 19
Junction temperature TJ -40 150 °C 19
Storage temperature TST -55 150 °C 19
Power dissipation input part PDIN 100 mW @ TA = 85°C 19
Power dissipation output part DSO-16 wide body PDOUT-16 810 mW @ TA = 85°C, JEDEC 2s2p, no cooling 19
ESD capability HBM model VESDHBM -4 4 kV HBM model according to ANSI/ESDA/JEDEC JS-001 19
Maximum switching frequency fSW 1 MHz 19
Positive power supply output side VVCC2 35 V in respect to GND2 (note 1); lower limit printed as VUVLOH2 20
Negative power supply output side VVEE2 -20 0 V in respect to GND2 (note 1) 20
Power supply difference output side Vmax2 35 V Vmax2 = VVCC2 - VVEE2 (note 2) 20
Power supply input side VVCC1 5.5 V in respect to GND1 (note 3); lower limit printed as VUVLOH1 20
Logic input voltages VLogicIN -0.3 V in respect to GND1 (note 3); upper limit printed as VVCC1 20
DESAT voltage VDESAT -0.3 V in respect to GND2 (note 1); upper limit printed as VVCC2 + 0.3 20
Ambient temperature TA -40 125 °C 20
Operating junction temperature TJop -40 150 °C 20
Common Mode Transient Immunity CMTI -300 300 kV/µs @ VISO = 1.5 kV; not production tested (note 4) 20
UVLO threshold output side (on), 1ED3323 VUVLOH2 12 12.6 V VVCC2-VGND2, 1ED3323 21
UVLO threshold output side (off), 1ED3323 VUVLOL2 10.4 11 V VVCC2-VGND2, 1ED3323 21
UVLO hysteresis output side VHYS2 0.6 0.9 V VUVLOH2 - VUVLOL2 21
UVLO hysteresis input side VHYS1 0.1 0.2 V VUVLOH1 - VUVLOL1 21
Quiescent current input side IQ1 1.1 3 mA VVCC1 = 5 V, VVCC2 = 15 V, VVEE2 = -8 V, IN+ High, IN- Low, OUT High, RDY High, /FLT High, VDESAT = 0 V (note 1) 21
Quiescent current output side IQ2 2 3 mA VVCC1 = 5 V, VVCC2 = 15 V, VVEE2 = -8 V, IN+ High, IN- Low, OUT High, RDY High, /FLT High, VDESAT = 0 V (note 1) 21
Digital input current IN-, /RST IIN-, IRST -200 -40 µA VIN- = GND1, VRST = GND1 21
Digital input current IN+ IIN+ 40 200 µA VIN+ = VVCC1 21
Digital pull up current RDY, /FLT IPRDY, IPFLT -400 -100 µA VRDY = GND1, VFLT = GND1 21
High level output peak current (1ED3323) IOUTH 4 6 A IN+ High, IN- Low, VOUT = VVCC2 - 15 V, VVCC2 = 15 V, CL = 100 nF, RL = 0.1 Ohm (note 1) 22
High level output on resistance (1ED3323) RDSON,H 0.5 0.79 1.3 Ω IOUTH = 0.1 A 22
Low level output peak current (1ED3323) IOUTL 4 8.5 A IN+ Low, IN- Low, OUT = VVEE2 + 15 V, VVCC2 = 15 V, CL = 100 nF, RL = 0.1 Ohm (note 4) 22
Low level output on resistance (1ED3323) RDSON,L 0.35 0.51 0.85 Ω IOUTL = 0.1 A 22
Short circuit clamp voltage OUT / VCC2 (1ED3323) VCLP_OUT 1 1.5 V path off, IOUT = 500 mA, t < 10 µs; not production tested (note 6) 22
Low level clamp current ICLAMP,L 2 3 A VCLAMP = 1.5 V, VVCC2 = 15 V, VVEE2 = 0 V, Rg = 0.1 Ω, Cg = 1 µF (note 1) 23
Low level clamp on resistance RDSON,CLP 0.4 0.6 1 Ω IOUTL = 0.1 A 23
Clamp threshold voltage VCLAMP 1.6 2.1 2.4 V in respect to VEE2 23
Short circuit clamp voltage CLAMP / VCC2 VCLP 1.8 2 V path off, ICLAMP = 500 mA, t < 10 µs (note 1) 23
Input IN+, IN-, /RST to output propagation delay on tPDON 74 80 84 ns CLOAD = 100 pF, VIN+ = 70 %, VOUT = 20 %, TA = 25 °C 23
Input IN+, IN-, /RST to output propagation delay off tPDOFF 81 86 92 ns CLOAD = 100 pF, VIN+ = 30 %, VOUT = 80 %, TA = 25 °C 23
Input IN+, IN-, /RST pulse suppression time (filter time) tINFLT 29 35 41 ns shorter pulses will not propagate to the output 23
Rise time 1 trise1 15 20 ns CLOAD = 1 nF, VL 20 %, VH 80 %, VVCC2 = 15 V, VVEE2 = GND2 = 0 V 24
Rise time 2 trise2 10 15 ns CLOAD = 100 pF, VL 20 %, VH 80 %, VVCC2 = 15 V, VVEE2 = GND2 = 0 V (note 1) 24
Fall time 1 tfall1 15 20 ns CLOAD = 1 nF, VL 20 %, VH 80 %, VVCC2 = 15 V, VVEE2 = GND2 = 0 V 24
Fall time 2 tfall2 10 15 ns CLOAD = 100 pF, VL 20 %, VH 80 %, VVCC2 = 15 V, VVEE2 = GND2 = 0 V (note 1) 24
Blanking capacitor charge current IDESATC 438 510 582 µA VVCC2 = 15 V, VVEE2 = GND2, VDESAT - VGND2 = 2 V 24
Blanking capacitor discharge current IDESATD 90 150 mA VVCC2 = 15 V, VVEE2 = GND2, VDESAT - VGND2 = 6 V 24
Desaturation reference level VDESATth 8.5 9 9.5 V VVCC2 = 15 V, in respect to GND2 24
Desaturation sense to out low delay (1ED3323) tDESATOUT 350 430 ns VOUT = 90 %, COUT = 1 nF, OUT = OUTH + OUTL shorted 25
Desaturation low voltage VDESATL 0.25 0.5 0.95 V IN+ = Low, IN- = Low, OUT(H,L) = Low, IDESAT = 70 mA 25
Leading edge blanking tDESATleb 280 400 500 ns 25
Short circuit clamp voltage desat / vcc2 VCLP_DESAT 1.4 1.6 V path off, IDESAT = 500 mA, t < 10 µs (note 1) 25
Active shut down voltage VACTSD 2 2.6 V IOUT = 200 mA; VVCC2 = open 25
Thermal resistance junction to ambient DSO-16 wide body, JEDEC 1s0p PCB with cooling RTHJAwc 86.7 K/W @ TA = 85 °C, PDIN = 100 mW, PDOUT = 650 mW, JEDEC 1s0p PCB, DSO-16 wide body with cooling 19
Thermal resistance junction to ambient DSO-16 wide body, JEDEC 2s2p PCB no cooling RTHJAnc 71.4 K/W @ TA = 85 °C, PDIN = 100 mW, PDOUT = 810 mW, JEDEC 2s2p PCB, DSO-16 wide body no cooling 19

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper dissipation. The 1ED332xMC12N is conceived to dissipate most of the heat generated through this pins. Figure 16 Reference layout for thermal data (Copper thickness 102 μm) 30

CAD (KiCad official)

  • Symbol: 1ED3323MC12NXUMA1
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: 1ed3323mc12nxuma1-etched.step / 1ed3323mc12nxuma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 1ed3323mc12nxuma1.step / 1ed3323mc12nxuma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (33 pp, sha256 8b0f42f9805be5a6, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF