main
Ray Publish 0.1.0 b5ac468
(footprint "NorComp_182_1d2c35"
	(version 20240108)
	(generator "adom_assets")
	(layer "F.Cu")
	(descr "Derived host land (NorComp drawing 182-YYY-113RYY1 rev 16 (R/A 0.318in male economy D-sub), p.1 'RECOMMENDED PCB LAYOUT': contact holes dia 0.047 [1.19], pitch 0.109 [2.77], rows 0.112 [2.84]; mounting (boardlock/standoff) holes dia 0.126 [3.2] at B = 0.984 [24.99] for 9 positions (table), 0.056 [1.42] from the pin row (half the row spacing, as in KiCad DSUB-9 ..._EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm, whose 25.0 / 1.42 geometry matches). Positions and drills are printed. NorComp prints NO copper pad diameters: 1.8 (contacts, 0.3 ring on the 1.19 drill) and 4.0 (mounting, as KiCad) are derived, hence land_source derived. Mounting-hole x = centre of pins 1-5 (5.54) +/- 24.99/2. Body: A 30.80 (1.213) wide, 0.494 [12.55] above the board, 0.374 [9.5] deep; its depth placement is approximate.; family D1d2c35, spec 1d2c358883)")
	(tags "adom generated")
	(attr through_hole)
	(property "Reference" "REF**" (at 0 -4.58 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))
	(property "Value" "NorComp_182_1d2c35" (at 0 7.42 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))
	(fp_line (start -9.86 -3.33) (end 20.94 -3.33) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start 20.94 -3.33) (end 20.94 6.17) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start 20.94 6.17) (end -9.86 6.17) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start -9.86 6.17) (end -9.86 -3.33) (stroke (width 0.1) (type solid)) (layer "F.Fab"))
	(fp_line (start -10.11 -3.58) (end 21.19 -3.58) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start 21.19 -3.58) (end 21.19 6.42) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start 21.19 6.42) (end -10.11 6.42) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start -10.11 6.42) (end -10.11 -3.58) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))
	(fp_line (start -1.3 -0.9) (end -1.3 0.9) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))
	(pad "1" thru_hole rect (at 0 0) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "2" thru_hole circle (at 2.77 0) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "3" thru_hole circle (at 5.54 0) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "4" thru_hole circle (at 8.31 0) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "5" thru_hole circle (at 11.08 0) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "6" thru_hole circle (at 1.385 2.84) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "7" thru_hole circle (at 4.155 2.84) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "8" thru_hole circle (at 6.925 2.84) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "9" thru_hole circle (at 9.695 2.84) (size 1.8 1.8) (drill 1.19) (layers "*.Cu" "*.Mask"))
	(pad "MP" thru_hole circle (at -7.185 1.42) (size 4 4) (drill 3.2) (layers "*.Cu" "*.Mask"))
	(pad "MP" thru_hole circle (at 17.805 1.42) (size 4 4) (drill 3.2) (layers "*.Cu" "*.Mask"))
	(model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/NorComp_182_1d2c35.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))
)