Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

182-009-113R531

NorComp Inc. · Connectors, Interconnects · Unknown

182-009-113R531 from NorComp Inc., in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive contact 1
2 2 passive contact 2
3 3 passive contact 3
4 4 passive contact 4
5 5 passive contact 5
6 6 passive contact 6
7 7 passive contact 7
8 8 passive contact 8
9 9 passive contact 9
MP MP passive boardlock / mounting (shell)

Key specifications

Parameter Value
Manufacturer NorComp Inc.
Package Unknown
Category Connectors, Interconnects
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Working voltage 250 V 1
Current rating 5 A 5 AMPS MAX 1
Dielectric strength 1000 VAC rms 1
Insulation resistance 1000 MOhm 1,000 MOHMS MIN 1
Contact resistance 15 mOhm 15 mOHM MAX 1
Operating temperature -55 105 °C 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
shell nickel SHELL PLATING 3 = NICKEL 1

CAD (Adom-generated)

  • Symbol: 182-009-113R531
  • Footprint: Adom_Gen:NorComp_182_1d2c35
  • 3D model: generated to fit the land (STEP)
  • 3D model files: 182-009-113r531-etched.step / 182-009-113r531-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 182-009-113r531.step / 182-009-113r531.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NorComp Inc. datasheet (2 pp, sha256 bbdfba8ac0d25c59, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: NorComp drawing 182-YYY-113RYY1 rev 16 (R/A 0.318in male economy D-sub), p.1 'RECOMMENDED PCB LAYOUT': contact holes dia 0.047 [1.19], pitch 0.109 [2.77], rows 0.112 [2.84]; mounting (boardlock/standoff) holes dia 0.126 [3.2] at B = 0.984 [24.99] for 9 positions (table), 0.056 [1.42] from the pin row (half the row spacing, as in KiCad DSUB-9 ..._EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm, whose 25.0 / 1.42 geometry matches). Positions and drills are printed. NorComp prints NO copper pad diameters: 1.8 (contacts, 0.3 ring on the 1.19 drill) and 4.0 (mounting, as KiCad) are derived, hence land_source derived. Mounting-hole x = centre of pins 1-5 (5.54) +/- 24.99/2. Body: A 30.80 (1.213) wide, 0.494 [12.55] above the board, 0.374 [9.5] deep; its depth placement is approximate.

Datasheet PDF