132322

{
 "schema": "adom/verification@1",
 "part": "132322",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "2 of 2 pins described",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/132322-datasheet.pdf"
    }
   ],
   "files": {
    "132322.kicad_sym": "cfcdb45f77eec50f48c41978728cea53bbcd52d9b639cbf1c8a91e8af4989d3a",
    "132322.kicad_mod": "6fc86497ca0d122ead0ab3809ae1912f38c89f937d248766790b0fa4fef70d0d",
    "132322.step": "250d1b053856ac5aa91528387c9f56bf6174363b034ceb8117aaf0c9be4585b7"
   }
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "The board footprint scales its 3D model by 0.7x; KiCad STEP export ignores model scale, so...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "The board footprint scales its 3D model by 0.7x; KiCad STEP export ignores model scale, so the extracted model is the unscaled geometry. Check the body size against the Amphenol drawing.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-09",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet text layer: the manufacturer drawing is a scanned image; the attached PDF is the same pages with an OCR text layer added (ocrmypdf/tesseract) so pin names can be checked against it.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against Amphenol RF (Amphenol Connex) drawing 132322 Rev D",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: Amphenol RF customer drawing 132322.DWG Rev D (11/30/11), the file the 132322 product page links today (asset 4065786498, fetched 2026-10-27, sha256 090fe648); replaces the page's 400 dpi raster + OCR copy of the same drawing",
     "result": "pass"
    },
    {
     "text": "Pins: 1 CONTACT = centre contact pin (RF signal), 2 BODY = body legs; names are the drawing's part list nouns (CONTACT PIN, BODY); both passive. Descriptions rewritten from the drawing",
     "result": "pass"
    },
    {
     "text": "Footprint vs RECOMMENDED PCB LAYOUT: top side 3 pads 1.50 mm wide at 2.77 mm centres, centre pad 4.25 mm long, outer pads 3.95 mm long and set back 0.30 mm from the centre pad's edge end; bottom side 2 pads 1.50 x 3.95 mm at 5.54 mm centres: footprint pads 1 (1.50 x 4.25 at x 0) and 2 (1.50 x 3.95 at x +-2.77, top and bottom copper, 0.30 mm set back) match exactly",
     "result": "pass"
    },
    {
     "text": "Board edge: the footprint's Edge.Cuts line is 0.20 mm outside the centre pad; the drawing shows the board edge just outside the pads but does not dimension it",
     "result": "note"
    },
    {
     "text": "3D body: flange 6.35 x 6.35 mm, length 9.52 + 3.81 = 13.33 mm, contact pin Ø0.76 lying on pad 1 at z 0, legs 1.73 mm apart for the 1.57 mm board (top legs on the top pads, bottom legs to z -2.80): matches the drawing at its 6.35 [.250] SQ, 9.52 [.375], 3.81 [.150], 1.73 [.068] dimensions; the old 0.7x model-scale note is moot (the STEP is full size)",
     "result": "pass"
    },
    {
     "text": "DigiKey ACX1652-ND and Mouser 523-132322 confirmed by part lookup 2026-10-27 (Amphenol RF 132322)",
     "result": "pass"
    },
    {
     "text": "Datasheet copy on the page is Amphenol's drawing with an OCR text layer added (ocrmypdf), because the drawing is vector artwork with no text; the drawing itself is unchanged; Amphenol's file sha256 090fe6487b8f736f",
     "result": "note"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify 0.2.0: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Amphenol RF)",
     "href": "https://www.amphenolrf.com/en-us/assets/file/4065786498/"
    }
   ],
   "files": {
    "132322.kicad_sym": "6244933af29dc4128a18742c8d63ed7412a13da5282c562709de81ad97c7b6a6",
    "132322.kicad_mod": "eba2cd985e15d6c19988241aa8d2ad0675174a6302457be456493951414e9211",
    "132322.step": "250d1b053856ac5aa91528387c9f56bf6174363b034ceb8117aaf0c9be4585b7"
   }
  }
 ]
}