component
132322
Public Made by Adomby adom
Amphenol RF RF Coaxial Connectors (SMA end-launch jack), 132322. KiCad symbol, footprint and 3D as used on Adom boards.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdown132322
Amphenol RF · RF Coaxial Connectors (SMA end-launch jack) · 132322
132322 from Amphenol RF, in a 132322. Symbol, footprint and 3D model are the ones used on Adom board designs (3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed).
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CONTACT | passive | Centre contact (CONTACT PIN, beryllium copper, gold plated, Ø0.76 mm), the RF signal; lies on the 1.50 x 4.25 mm centre pad of the recommended PCB layout. [datasheet p.1] |
| 2 | BODY | passive | Connector body (brass, gold plated, 6.35 mm square flange); its four legs straddle the 1.57 mm board and solder to the two outer top-side pads and both bottom-side pads (1.50 x 3.95 mm) of the recommended PCB layout. [datasheet p.1] |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Amphenol RF |
| Package | 132322 |
| Category | Connectors |
| Pins | 2 |
| Mouser | 523-132322 |
| DigiKey | ACX1652-ND |
CAD
- Symbol:
132322(source libraryConnector:Conn_Coaxial_Small) - Footprint:
coax:132322 - 3D model path in footprint:
${KIPRJMOD}/132322.step - 3D files:
132322.step/132322.glb. - EAGLE/Fusion library:
132322.lbr(adom-lbr)
Provenance
- Datasheet: Amphenol RF 132322 customer drawing (Drawing 132322.DWG Rev D (11/30/11, ECR 2254), sha256
bc523ca1f6bdc261, retrieved 2026-10-27, tier: mfr) - CAD: Footprint and symbol as used on Adom board designs; 3D model: Adom-generated 3D model built from the datasheet dimensions (simplified; CC-BY-SA 4.0); no vendor CAD is redistributed.
- Pins: KiCad symbol from the source board.