1-2199230-6

{
 "plan": {
  "schema": "adom/mark-plan@1",
  "mpn": "1-2199230-6",
  "step": "1-2199230-6.step",
  "footprint": "1-2199230-6.kicad_mod",
  "standUp": [],
  "standUpSource": "as-is (Z up)",
  "inputs": {
   "up": "auto",
   "face": "auto",
   "along": null,
   "upSupplied": false,
   "faceSupplied": false,
   "faceSource": "inferred: top face"
  },
  "face": "top",
  "pin1": {
   "source": "footprint pad 1",
   "xyMm": [
    -9.25,
    5.275
   ],
   "corner": "left/upper"
  },
  "existingMarks": [],
  "vendorMarking": {
   "present": false,
   "glyphFaces": 6
  },
  "faceNormal": [
   0,
   0,
   1
  ],
  "longAxis": {
   "axis": "x",
   "vector": [
    1.0,
    0.0,
    0.0
   ],
   "why": "two pin rows (33 + 34 pins, 7.55 mm apart): parallel to the pin rows (band 19.93 mm along, 5.44 mm across)",
   "source": "pin-rows",
   "override": null,
   "pinRows": {
    "axis": "x",
    "pinsPerRow": [
     33,
     34
    ],
    "rowSpacingMm": 7.55,
    "exposed": 0
   }
  },
  "readingDirection": {
   "vector": [
    1.0,
    0.0,
    0.0
   ],
   "angleDeg": 0,
   "textUp": [
    -0.0,
    1.0,
    0.0
   ],
   "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
  },
  "band": {
   "regionMm": [
    -8.98,
    -0.34,
    10.95,
    5.1
   ],
   "zMm": 4.15,
   "lengthMm": 19.93,
   "heightMm": 5.44,
   "why": "highest flat face over the body centre",
   "terminationsExcludedBy": null,
   "trimmedEnds": [],
   "keepouts": [
    [
     -9.5,
     4.35,
     -9.0,
     4.75
    ]
   ],
   "sideTurn": null,
   "margins": {
    "lengthEachSide": 0.12,
    "heightEachSide": 0.15
   }
  },
  "text": {
   "lines": [
    "1-2199230-6"
   ],
   "chars": 11,
   "capHeightMm": 1.7134,
   "smallestLineMm": 1.7134,
   "heightPctOfBand": 31.5,
   "why": "one line (two lines would give 1.656 mm on the smaller line, not 1.15x larger)",
   "alternative": {
    "lines": [
     "1-",
     "2199230-6"
    ],
    "capHeightMm": 1.6557,
    "smallestLineMm": 1.6557
   },
   "font": "service-step2glb /laser-etch (single-stroke outline font)"
  },
  "etch": {
   "poseQuarterTurnsZ": 0,
   "service": "/laser-etch?mode=flat",
   "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
  },
  "outline": {
   "upAxis": "z",
   "poseRotZDeg": 180,
   "rot": 180,
   "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn 1-2199230-6 (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws 1-2199230-6 on the planned band, rot 180)",
   "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
  },
  "widget": {
   "px": 320,
   "pxPerMm": 13.62,
   "capHeightPx": 19.1
  },
  "hints": [],
  "warnings": [
   "pin 1 lands UPPER-left in the standard pose (left/upper): the pads are numbered clockwise; check the footprint is not mirrored and the model matches it"
  ],
  "summary": "Mark along the 19.93 mm axis (+X), 1.71 mm text, upright with pin 1 left upper, outline rot 180 after a 180 deg pose turn; ~19 px caps at 320 px"
 },
 "etch": {
  "out": "1-2199230-6-etched.step",
  "mpn": "1-2199230-6",
  "lines": [
   "1-2199230-6"
  ],
  "removedOldMarks": [],
  "turns": [],
  "serviceMarkTurnedQuarter": 0,
  "line2Scaled": false,
  "fit": {
   "scale": 1.0892,
   "capMm": 1.7408,
   "markMm": [
    15.1468,
    1.7554
   ],
   "bandMm": [
    19.93,
    5.44
   ],
   "zMm": 4.155
  }
 }
}