0705530001

{
 "slug": "0705530001",
 "mpn": "0705530001",
 "date": "2026-10-28",
 "source": {
  "tier": 1,
  "kind": "manufacturer",
  "manufacturer": "Molex",
  "file": "vendor/0705530001-molex-original.step",
  "original_name": "705530001.stp in 705530001_stp.zip",
  "format": "STEP AP203 (CONFIG_CONTROL_DESIGN), Pro/ENGINEER export 2013-07-31, one fused solid, no colour",
  "sha256": "ff4d96c76047a576610ea15f2f35236b9a91587c0355f347ee05627cefc3764f",
  "zip_url": "https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/3dcadmodels/705/70553/705530001_stp.zip",
  "zip_sha256": "527f26661697ef81967c388bb1dc7f518d5cc80bf0cd18ca675505c447434ee5",
  "source_page": "https://www.molex.com/en-us/products/part-detail/705530001",
  "retrieved": "2026-10-27",
  "ruling": "Caleb 2026-10-28: follow Ray's trend (publish the manufacturer's own STEP, posed, on the CC-BY-SA page, as adom/670688000 does).",
  "site_terms": "molex.com Legal: 'The entire content (images and text) of this Website is copyrighted and may not be distributed, downloaded, modified, reused, reposted or otherwise used, except as provided herein, without the express written permission of Molex. Content from the Website may be downloaded and used only for the purpose of evaluating Molex's products for use in an application.' The STEP zip carries no licence of its own.",
  "site_terms_url": "https://www.molex.com/en-us/about/legal"
 },
 "transform": {
  "description": "Rotation and translation only; the original solid is wrapped in an assembly that carries the location (XCAF), so the Molex geometry and attributes are unchanged.",
  "rotation_rows_in_source_axes": [
   [
    0,
    0,
    1
   ],
   [
    1,
    0,
    0
   ],
   [
    0,
    1,
    0
   ]
  ],
  "translate_mm_after_rotation": [
   7.1755,
   -1.27,
   2.922
  ],
  "tail_check": {
   "tails": 2,
   "pads": 2,
   "max_offset_mm": 0.0
  }
 },
 "drawing_check": "provenance/drawing_check.json",
 "etch": "adom-chip-laser etch <slug>.step <MPN> (top face) -> <slug>-etched.step; GLBs by step2glb convert",
 "outputs": {
  "0705530001.step": "83c9cf4eb81697123183f1eac8e74bcfc3d3398ceaeaf7029509056a65f10f3e",
  "0705530001-etched.step": "0c657be43b2dbbcf5a5966a1559dabe30263b660662d4f7bd96683bc20757bed",
  "0705530001.glb": "4cc144624a2c72c318a43be73449f3aaf92b8fb1cbcab8f9bc8e324f8645472f",
  "0705530001-etched.glb": "b22c6085b5ee5a933ccd70023d47b016470b30a2db7f4ff1121fff1b15501e0d"
 },
 "previous": {
  "file": "provenance/previous/PinHeader_1x02_P2.54mm_Vertical.step",
  "note": "KiCad PinHeader_1x02_P2.54mm_Vertical (CC-BY-SA-4.0) placed from the source board: a vertical header, not this part."
 },
 "checks": [
  {
   "text": "3D: Molex's own STEP 705530001.stp for 70553-0001 (STEP AP203 (CONFIG_CONTROL_DESIGN), Pro/ENGINEER export 2013-07-31, one fused solid, no colour), from the 3D CAD model link on the Molex product page (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/3dcadmodels/705/70553/705530001_stp.zip, retrieved 2026-10-27; zip sha256 527f26661697, STEP sha256 ff4d96c76047); original bytes kept as vendor/0705530001-molex-original.step.",
   "result": "pass"
  },
  {
   "text": "Posed by rotation and translation only (provenance/tools/pose_vendor.py): new X, Y, Z = Molex axes [[0, 0, 1], [1, 0, 0], [0, 1, 0]], then translate [7.1755, -1.27, 2.922] mm; seat (lowest housing level, found by bisection) on z = 0, mating face toward +X; all 2 tails land on their drilled pads (max offset 0.000 mm); footprint binding identity.",
   "result": "pass"
  },
  {
   "text": "Molex model against SDA-70553-XXXX rev M (provenance/tools/measure_vendor.py, provenance/drawing_check.json): overall depth (13.59) REF 13.589 (drawing 13.59); overall height (6.99) REF 6.986 (drawing 6.99); width B + 2 x (1.02) 7.366 (drawing 7.37); tail below seat D (3.30) REF 3.301 (drawing 3.3); mating face to tail rear edge (13.21) TYP 13.21 (drawing 13.21); cavity height 4.32 (2 ckt, under latch) 4.318 (drawing 4.32); cavity height 2.79 (2 ckt, behind latch) 2.667 (drawing 2.79); E: pin tip to cavity rear wall 6.10 +-0.25 6.096 (drawing 6.1); cavity rear wall from mating face (8.89) 8.889 (drawing 8.89); pin square (0.64) 0.635 (drawing 0.64): all within the drawing tolerances.",
   "result": "pass"
  },
  {
   "text": "The posed Molex model, overlaid on the drawing views at the drawing scale, coincides with the outline, pins and tails (provenance/evidence/overlay_sheet1_side_view.png, provenance/evidence/overlay_sheet1_pcb_layout.png).",
   "result": "pass"
  },
  {
   "text": "Undimensioned detail: the latch block on top is 2.79 mm deep in the Molex model against about 3.8 mm drawn on the 4:1 side view; every printed dimension agrees.",
   "result": "note"
  },
  {
   "text": "Colour: none in the Molex file (AP203, one fused solid); nothing to keep, GLB uncoloured.",
   "result": "note"
  }
 ]
}