main
Ray Publish 0.1.0 16ac1d3

0603WAF2001T5E

UNI-ROYAL(Uniroyal Elec) · Chip Resistor - Surface Mount · 0603

0603WAF2001T5E from UNI-ROYAL(Uniroyal Elec), in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a thick film chip resistor (2.00 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation.
2 2 passive Terminal 2 of a thick film chip resistor (2.00 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation.

Key specifications

Parameter Value
Manufacturer UNI-ROYAL(Uniroyal Elec)
Package 0603
Category Resistors
Pins 2

Electrical characteristics

Limits from the LCSC catalog entry for this part (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance 2 kΩ nominal, catalog attribute (LCSC C22975) catalog
Tolerance -1 1 % catalog attribute (LCSC C22975) catalog
Rated power 100 mW catalog attribute (LCSC C22975) catalog
Temperature coefficient TCR -100 100 ppm/°C catalog description (LCSC C22975) catalog
Operating temperature -55 155 °C catalog description (LCSC C22975) catalog

CAD (Adom-generated)

  • Symbol: 0603WAF2001T5E
  • Footprint: Adom_Gen:UNI-ROYAL_Uniroyal_Elec__0603_8c6b04
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UNI-ROYAL(Uniroyal Elec) datasheet (9 pp, sha256 11cd644d5d8a34a6, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Uniroyal '8. Recommend the size of welding plate' (p.5), 0603: A 0.9±0.05 (gap between pads), B 0.65±0.05 (pad length), C 0.8±0.05 (pad width), D 2.1±0.05 (overall); letters fixed by the drawing. The nominals do not close (0.9 + 2 x 0.65 = 2.2 vs D 2.1), so gap A 0.90 and overall D 2.10 are kept and B = 0.60, the low end of its printed 0.65±0.05: every printed value is within its tolerance. Pads 0.60 x 0.80 at x +/-0.75.

Datasheet PDF