0603WAF2001T5E
Public Made by Adomby adom
UNI-ROYAL(Uniroyal Elec) Chip Resistor - Surface Mount, 0603. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
0603WAF2001T5E
UNI-ROYAL(Uniroyal Elec) · Chip Resistor - Surface Mount · 0603
0603WAF2001T5E from UNI-ROYAL(Uniroyal Elec), in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of a thick film chip resistor (2.00 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation. |
| 2 | 2 | passive | Terminal 2 of a thick film chip resistor (2.00 kOhm ±1 %, 1/10 W, 0603); unpolarised, either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI-ROYAL(Uniroyal Elec) |
| Package | 0603 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits from the LCSC catalog entry for this part (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance | 2 | kΩ | nominal, catalog attribute (LCSC C22975) | catalog | |||
| Tolerance | -1 | 1 | % | catalog attribute (LCSC C22975) | catalog | ||
| Rated power | 100 | mW | catalog attribute (LCSC C22975) | catalog | |||
| Temperature coefficient | TCR | -100 | 100 | ppm/°C | catalog description (LCSC C22975) | catalog | |
| Operating temperature | -55 | 155 | °C | catalog description (LCSC C22975) | catalog |
CAD (Adom-generated)
- Symbol:
0603WAF2001T5E - Footprint:
Adom_Gen:UNI-ROYAL_Uniroyal_Elec__0603_8c6b04 - 3D model: generated to fit the land (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI-ROYAL(Uniroyal Elec) datasheet (9 pp, sha256
11cd644d5d8a34a6, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Uniroyal '8. Recommend the size of welding plate' (p.5), 0603: A 0.9±0.05 (gap between pads), B 0.65±0.05 (pad length), C 0.8±0.05 (pad width), D 2.1±0.05 (overall); letters fixed by the drawing. The nominals do not close (0.9 + 2 x 0.65 = 2.2 vs D 2.1), so gap A 0.90 and overall D 2.10 are kept and B = 0.60, the low end of its printed 0.65±0.05: every printed value is within its tolerance. Pads 0.60 x 0.80 at x +/-0.75.