board

Solar MPPT Power System

Public Unreviewed

by TylerK

A 30 W solar battery charger with regulated 5 V and 3.3 V rails: an STM32G031 running perturb & observe MPPT and a CC/CV charge state machine, steering a TI LM5175 4-switch buck-boost through a single analog control input. Four-layer KiCad board, schematic and PCB generated from Python, with an electrothermal simulation run against the published board file.

hardwareboardpcbkicadsolarmpptpower-electronicsbattery-chargerbuck-boostmcustm32firmwarelm5175ina180current-sensegeneratedelectrothermal-simulationfirmware-testing
Overview Files Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
mppt-power-system / docs / simulation
Name Last commit message Last updated
05-electrothermal-simulation.md Update 51 file(s) · TylerK 1mo ago
current-density-maps.png Update 51 file(s) · TylerK 1mo ago
current-density-summary.csv Update 51 file(s) · TylerK 1mo ago
mesh-convergence.csv Update 51 file(s) · TylerK 1mo ago
requirements.txt Replace discrete-analog board with MCU/IC redesign: STM32G031 P&O MPPT + CC/CV firmware, LM5175 buck-boost, INA180 curr… · TylerK 1mo ago
run_simulations.py Update 50 file(s) · TylerK 1mo ago
simulation-results.json Update 51 file(s) · TylerK 1mo ago
thermal-map.png Update 51 file(s) · TylerK 1mo ago
thermal-sensitivity.csv Update 51 file(s) · TylerK 1mo ago
via-plating-sensitivity.csv Update 51 file(s) · TylerK 1mo ago