Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

ZXLD1362ET5TA

Diodes Incorporated · LED Drivers · TSOT-25

ZXLD1362ET5TA from Diodes Incorporated, in a TSOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LX output Drain of the internal NDMOS switch. Connects to the inductor and freewheel diode in the buck converter topology. Absolute max LX voltage -0.3 to +65V; continuous switch current 1A; RDS(on) typ 0.5Ω @ 1A.
2 GND power_in Ground reference (0V). All voltages in the datasheet are measured with respect to this pin.
3 ADJ input Multi-function On/Off and brightness control pin. Leave floating for nominal operation (VADJ = VREF = 1.25V, IOUTnom = 0.1/RS). Drive below 0.2V to disable output; drive with 0.3V-2.5V DC to set output current between 25% and 200% of nominal, or apply a PWM waveform (up to 1000:1 range) for LED dimming. A capacitor from ADJ to GND sets soft-start (~200µs/nF).
4 ISENSE input Current sense input. Connect resistor RS from this pin to VIN to define nominal average LED output current IOUTnom = 0.1/RS (VSENSE typ 100mV). RSMIN = 0.1Ω with ADJ pin open. Absolute max VSENSE = +0.3 to -5V (with respect to VIN).
5 VIN power_in Input supply voltage (6V to 60V operating; absolute max -0.3 to +65V). Decouple to GND with a 4.7µF or higher X7R ceramic capacitor placed close to the device. VIN > 16V recommended to fully enhance the internal output transistor.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TSOT-25
Category LED-drv
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • ZXLD1362ET5TA

CAD (KiCad official)

  • Symbol: ZXLD1362ET5TA
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: TSOT-25 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (25 pp, sha256 00adf4e6f487de76, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF