component
ZXLD1362ET5TA
Public Made by Adomby adom
Diodes Incorporated LED Drivers, TSOT-25. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownZXLD1362ET5TA
Diodes Incorporated · LED Drivers · TSOT-25
ZXLD1362ET5TA from Diodes Incorporated, in a TSOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Drain of the internal NDMOS switch. Connects to the inductor and freewheel diode in the buck converter topology. Absolute max LX voltage -0.3 to +65V; continuous switch current 1A; RDS(on) typ 0.5Ω @ 1A. |
| 2 | GND | power_in | Ground reference (0V). All voltages in the datasheet are measured with respect to this pin. |
| 3 | ADJ | input | Multi-function On/Off and brightness control pin. Leave floating for nominal operation (VADJ = VREF = 1.25V, IOUTnom = 0.1/RS). Drive below 0.2V to disable output; drive with 0.3V-2.5V DC to set output current between 25% and 200% of nominal, or apply a PWM waveform (up to 1000:1 range) for LED dimming. A capacitor from ADJ to GND sets soft-start (~200µs/nF). |
| 4 | ISENSE | input | Current sense input. Connect resistor RS from this pin to VIN to define nominal average LED output current IOUTnom = 0.1/RS (VSENSE typ 100mV). RSMIN = 0.1Ω with ADJ pin open. Absolute max VSENSE = +0.3 to -5V (with respect to VIN). |
| 5 | VIN | power_in | Input supply voltage (6V to 60V operating; absolute max -0.3 to +65V). Decouple to GND with a 4.7µF or higher X7R ceramic capacitor placed close to the device. VIN > 16V recommended to fully enhance the internal output transistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-25 |
| Category | LED-drv |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
ZXLD1362ET5TA
CAD (KiCad official)
- Symbol:
ZXLD1362ET5TA - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: TSOT-25 (KiCad packages3D, STEP)
- 3D model files:
zxld1362et5ta-etched.step/zxld1362et5ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zxld1362et5ta.step/zxld1362et5ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (25 pp, sha256
00adf4e6f487de76, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).