component
zxct1109sa-7
Public Unreviewedby Ray
Diodes Incorporated Current-Sensing Amplifiers, SOT-23. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
README
markdownZXCT1109SA-7
Diodes Incorporated · Current-Sensing Amplifiers · SOT-23
ZXCT1109SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Current output pin. Sources a current proportional to VSENSE (IOUT = 4mA/V × VSENSE, typ). Also serves as the substrate/ground return for the ZXCT1109, so the minimum rail voltage that can be used is 2.5V + VOUT. An external RGAIN from OUT to GND converts the output current into a voltage. |
| 2 | S+ | power_in | Positive input of the current monitor and analog supply pin. Wide common-mode input range 2.5V to 36V; provides power to the internal circuitry (line-powered). Current through this pin varies with the differential sense voltage. Connect to the high side of the external RSENSE shunt resistor. |
| 3 | S- | input | Negative input of the current monitor with wide common-mode input range (up to 36V relative to OUT). Connect to the load side of the external RSENSE shunt resistor. Differential sense voltage VSENSE = VS+ − VS- (0 to 0.5V recommended, absolute max −0.3 to 0.8V); input current must be limited to ±8.5mA (RPROT recommended for short-circuit protection). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Op-amp/Cmp |
| Pins | 3 |
Ordering variants
ZXCT1109SA-7ZXCT1109SA-7ZXCT1107SA-7ZXCT1109SA-7ZXCT1110W5-7
CAD (KiCad official)
- Symbol:
ZXCT1109SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (None pp, sha256
168470be7bc3bef4, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
PCB Footprint
Open full view ↗Loads on click. Unloads when scrolled away or the tab is hidden.
Datasheet
Open in new tab ↗Loads on click. Unloads when scrolled away or the tab is hidden.