Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

ZD24C32A-SSGMB

Zetta · EEPROM · SOP-8

ZD24C32A-SSGMB from Zetta, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
2 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
3 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
4 GND power_in Ground reference for the power supply. Connect to system ground.
5 SDA bidirectional Serial Data. Open-drain bidirectional I/O for serial data transfer. Requires an external pull-up resistor to VCC (not to exceed 10 kΩ). Can be wire-ORed with other open-drain/open-collector devices on the same bus.
6 SCL input Serial Clock input from the master. Data on SDA is latched on the rising edge of SCL and clocked out on the falling edge. Must be forced high or pulled high via external resistor when the bus is idle. Supports up to 1 MHz (Fast Mode Plus at 2.5-5.5V).
7 WP input Write Protect (active high). Tie to GND for normal write operations; tie to VCC to inhibit all writes to the memory array. If left floating it is internally pulled down to GND, but a defined connection is recommended.
8 VCC power_in Device power supply, 1.7V to 5.5V (2.5V to 5.5V for 1 MHz Fast Mode Plus operation). Operations at invalid VCC should not be attempted.

Key specifications

Parameter Value
Manufacturer Zetta
Package SOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ZD24C32A-SSGMT
  • ZD24C32A-SSGMB
  • ZD24C32A-SSGMBSSPMT
  • ZD24C32A-SSGMBSSPMB
  • ZD24C32A-SSGMBXGMT
  • ZD24C32A-SSGMBXGMB
  • ZD24C32A-SSGMBXPMT
  • ZD24C32A-SSGMBXPMB
  • ZD24C32A-SSGMBMAGMT
  • ZD24C32A-SSGMBMAGMB
  • ZD24C32A-SSGMBMAPMT
  • ZD24C32A-SSGMBMAPMB
  • ZD24C32A-SSGMBPGMT
  • ZD24C32A-SSGMBPGMB
  • ZD24C32A-SSGMBPPMT
  • ZD24C32A-SSGMBPPMB
  • ZD24C32A-SSGMBSTGMT
  • ZD24C32A-SSGMBSTGMB
  • ZD24C32A-SSGMBSTPMT
  • ZD24C32A-SSGMBSTPMB
  • ZD24C32A-SSGMBCGMT
  • ZD24C32A-SSGMBCGMB
  • ZD24C32A-SSGMBCPMT
  • ZD24C32A-SSGMBCPMB
  • ZD24C32A-SSGMBUGMT
  • ZD24C32A-SSGMBUGMB
  • ZD24C32A-SSGMBUPMT
  • ZD24C32A-SSGMBUPMB
  • ZD24C32A-SSGMBU1GMT
  • ZD24C32A-SSGMBU1GMB
  • ZD24C32A-SSGMBU1PMT
  • ZD24C32A-SSGMBU1PMB

CAD (KiCad official)

  • Symbol: ZD24C32A-SSGMB
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Zetta datasheet (28 pp, sha256 1ee3f07c57169b62, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF