component

ZD24C32A-SSGMB

Public Made by Adom

by adom

Zetta EEPROM, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentmemoryzd24c32a-ssgmb
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs zd24c32a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
package.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md zd24c32a-ssgmb: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 17d ago
zd24c32a-ssgmb-etched.fit.json zd24c32a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
zd24c32a-ssgmb-etched.glb zd24c32a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
zd24c32a-ssgmb-etched.step zd24c32a-ssgmb: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 4d ago
zd24c32a-ssgmb.glb Publish 0.1.0 · Ray 1mo ago
zd24c32a-ssgmb.kicad_mod Publish 0.1.0 · Ray 1mo ago
zd24c32a-ssgmb.kicad_sym Publish 0.1.0 · Ray 1mo ago
zd24c32a-ssgmb.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
zd24c32a-ssgmb.step Publish 0.1.0 · Ray 1mo ago

ZD24C32A-SSGMB

Zetta · EEPROM · SOP-8

ZD24C32A-SSGMB from Zetta, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
2 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
3 NC unconnected No Connect. Not bonded to a die pad. May be tied to GND or left floating.
4 GND power_in Ground reference for the power supply. Connect to system ground.
5 SDA bidirectional Serial Data. Open-drain bidirectional I/O for serial data transfer. Requires an external pull-up resistor to VCC (not to exceed 10 kΩ). Can be wire-ORed with other open-drain/open-collector devices on the same bus.
6 SCL input Serial Clock input from the master. Data on SDA is latched on the rising edge of SCL and clocked out on the falling edge. Must be forced high or pulled high via external resistor when the bus is idle. Supports up to 1 MHz (Fast Mode Plus at 2.5-5.5V).
7 WP input Write Protect (active high). Tie to GND for normal write operations; tie to VCC to inhibit all writes to the memory array. If left floating it is internally pulled down to GND, but a defined connection is recommended.
8 VCC power_in Device power supply, 1.7V to 5.5V (2.5V to 5.5V for 1 MHz Fast Mode Plus operation). Operations at invalid VCC should not be attempted.

Key specifications

Parameter Value
Manufacturer Zetta
Package SOP-8
Category Memory
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • ZD24C32A-SSGMT
  • ZD24C32A-SSGMB
  • ZD24C32A-SSGMBSSPMT
  • ZD24C32A-SSGMBSSPMB
  • ZD24C32A-SSGMBXGMT
  • ZD24C32A-SSGMBXGMB
  • ZD24C32A-SSGMBXPMT
  • ZD24C32A-SSGMBXPMB
  • ZD24C32A-SSGMBMAGMT
  • ZD24C32A-SSGMBMAGMB
  • ZD24C32A-SSGMBMAPMT
  • ZD24C32A-SSGMBMAPMB
  • ZD24C32A-SSGMBPGMT
  • ZD24C32A-SSGMBPGMB
  • ZD24C32A-SSGMBPPMT
  • ZD24C32A-SSGMBPPMB
  • ZD24C32A-SSGMBSTGMT
  • ZD24C32A-SSGMBSTGMB
  • ZD24C32A-SSGMBSTPMT
  • ZD24C32A-SSGMBSTPMB
  • ZD24C32A-SSGMBCGMT
  • ZD24C32A-SSGMBCGMB
  • ZD24C32A-SSGMBCPMT
  • ZD24C32A-SSGMBCPMB
  • ZD24C32A-SSGMBUGMT
  • ZD24C32A-SSGMBUGMB
  • ZD24C32A-SSGMBUPMT
  • ZD24C32A-SSGMBUPMB
  • ZD24C32A-SSGMBU1GMT
  • ZD24C32A-SSGMBU1GMB
  • ZD24C32A-SSGMBU1PMT
  • ZD24C32A-SSGMBU1PMB

CAD (KiCad official)

  • Symbol: ZD24C32A-SSGMB
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: zd24c32a-ssgmb-etched.step / zd24c32a-ssgmb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); zd24c32a-ssgmb.step / zd24c32a-ssgmb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Zetta datasheet (28 pp, sha256 1ee3f07c57169b62, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF