XPD720BP25 from Shenzhen Fuman, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VPWR	power_in	Chip input supply, 3.6 V to 21 V typical (max 25 V abs). UVLO rising 3.3 V, falling 2.9 V. Requires ~10 µF (min 4.7 µF) decoupling to GND.
2	OPTO	output	Optocoupler drive output. Sinks/sources current into the AC-DC / DC-DC feedback loop to dynamically adjust the primary-side regulator's output voltage for PD/PPS operation.
3	VFB	input	Voltage regulation feedback input, connected to the front-end power supply feedback divider (typ. R_FB1 = 100 kΩ upper, R_FB2 = 33 kΩ lower). Sensed to close the CV loop and step VBUS across PDO/APDO levels.
4	DP	bidirectional	Type-C USB 2.0 D+ data line. Used for BC1.2 DCP detection, QC2.0/3.0/3.0+, FCP/SCP/HVSCP, AFC, and Apple 2.4A handshake signalling. Includes over-voltage protection.
5	DM	bidirectional	Type-C USB 2.0 D- data line. Paired with DP for legacy fast-charge handshakes (QC/FCP/SCP/AFC/BC1.2/Apple). Includes over-voltage protection.
6	CC1	bidirectional	Type-C Configuration Channel 1. Drives Rp source (330 µA for 3A advertisement, 180 µA for 1.5A), detects sink attach/orientation, and carries BMC-encoded USB PD 2.0/3.0 / PPS messaging. Includes over-voltage protection.
7	CC2	bidirectional	Type-C Configuration Channel 2. Same function as CC1 for the opposite cable orientation; supports Rp advertisement and BMC PD/PPS signalling. Includes over-voltage protection.
8	VBUS	power_out	Type-C VBUS output. Internally connected via the integrated 10 mΩ power MOSFET and 10 mΩ current-sense resistor. Fast OVP trips at +20% of the target voltage, slow OVP at +15%. Requires optional 1 µF decoupling.
9	GND	power_in	Exposed thermal / power pad on the underside of the ESOP-8 package. Must be soldered to the PCB ground plane for both electrical ground reference and thermal dissipation (θJA = 42 °C/W).

Key specifications

Parameter	Value
Manufacturer	Shenzhen Fuman
Package	ESOP-8
Category	Interface
Pins	9

Ordering variants

Same part, different packaging or reel option.

XPD720BP25
XPD720A
XPD720APS25
XPD720APS30
XPD720DP30

CAD (KiCad official)

Symbol: XPD720BP25
Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
3D model: ESOP-8 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File	Size	Use it when
`xpd720bp25.step`	125 KB	You want the bare part, or you mark your own boards.
`xpd720bp25-etched.step`	2.1 MB	You want the part with `XPD720BP25` already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 531 faces against 152 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Shenzhen Fuman datasheet (12 pp, sha256 eece9ef9baf57354, retrieved 2026-08-17, tier: lcsc)
Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF