component

XL6013E1

Public Unreviewed

by Ray

XLSEMI LED Drivers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentled-drvxl6013e1
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗

Symbol & Footprint

Schematic Symbol

Open full view ↗

PCB Footprint

Open full view ↗
Contents

README

markdown

XL6013E1

XLSEMI · LED Drivers · SOIC-8

XL6013E1 from XLSEMI, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin. Drive low (<0.8 V) to shut the device down; drive high (>1.4 V) to turn it on. Floating defaults high. TTL-compatible.
2 VIN power_in Supply voltage input. Operates from 5 V to 40 V DC (absolute max 45 V). Bypass to GND with a suitably large capacitor (e.g. 100 uF/35 V) to eliminate input noise.
3 FB input Feedback pin. Regulates to a 0.22 V (typ) threshold voltage across the sense resistor to set LED current (I_LED = 0.22 V / R_CS).
4 NC unconnected Not connected. Leave floating or tie to GND.
5 SW output Power switch output. Drain of internal NMOS (Rdson ~110 mΩ), rated 60 V / 2 A with built-in OVP. Connect to the boost inductor / Schottky diode node. Pins 5 and 6 are tied together internally.
6 SW output Power switch output. Drain of internal NMOS (Rdson ~110 mΩ), rated 60 V / 2 A with built-in OVP. Connect to the boost inductor / Schottky diode node. Pins 5 and 6 are tied together internally.
7 GND power_in Ground return. Pins 7 and 8 are tied together internally and both must be connected to system ground for proper thermal and switching-current return.
8 GND power_in Ground return. Pins 7 and 8 are tied together internally and both must be connected to system ground for proper thermal and switching-current return.

Key specifications

Parameter Value
Manufacturer XLSEMI
Package SOIC-8
Category LED-drv
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • XL6013E1

CAD (KiCad official)

  • Symbol: XL6013E1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XLSEMI datasheet (12 pp, sha256 a32de76219b0882d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF