component

TSV611ILT

Public Unreviewed

by Ray

UMW Operational Amplifier, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.

componentop-amp-cmptsv611ilt
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

Datasheet

Open in new tab ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TSV611ILT

UMW · Operational Amplifier · SOT-23-5

TSV611ILT from UMW, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Non-inverting analog input. Rail-to-rail common-mode range (VCC-)-0.1 V to (VCC+)+0.1 V. Ultra-low 1 pA typ input bias current.
2 VCC- power_in Negative supply / ground rail. For single-supply operation tie to 0 V. Total supply (VCC+ to VCC-) 1.5 V to 5.5 V; absolute max 6 V.
3 IN- input Inverting analog input. Rail-to-rail common-mode range (VCC-)-0.1 V to (VCC+)+0.1 V. Ultra-low 1 pA typ input bias current.
4 OUT output Rail-to-rail amplifier output. Typical short-circuit source/sink 10 mA / 13 mA at VCC=1.8 V (38 mA / 44 mA at VCC=3.3 V). VOH within ~7 mV of VCC+ and VOL within ~16 mV of VCC- with RL=10 kOhm.
5 VCC+ power_in Positive supply rail. 1.5 V to 5.5 V operating (6 V absolute max). Decouple with a 100 nF ceramic capacitor to VCC-. Quiescent current 10 uA typ at 5 V per amplifier.

Key specifications

Parameter Value
Manufacturer UMW
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TSV611ILT
  • TSV611ILTAILT
  • TSV611ILTAICT
  • TSV611ILTIDT
  • TSV611ILTAIDT

CAD (KiCad official)

  • Symbol: TSV611ILT
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tsv611ilt.step 85 KB You want the bare part, or you mark your own boards.
tsv611ilt-etched.step 1.3 MB You want the part with TSV611ILT already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 346 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UMW datasheet (17 pp, sha256 2b566810f33690bd, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF