component
ts5a23157dgsr-tp
Public Unreviewedby Ray
TECH PUBLIC Analog Switches, Multiplexers, MSOP-10L. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
README
markdownTS5A23157DGSR-TP
TECH PUBLIC · Analog Switches, Multiplexers · MSOP-10L
TS5A23157DGSR-TP from TECH PUBLIC, in a MSOP-10L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Digital control input for switch 1. Selects whether COM1 connects to NO1 (IN1=1) or NC1 (IN1=0). 1.8 V logic compatible; VIH ≥ 1.6 V (VCC=3.3-5.5 V) or ≥ 1.4 V (VCC=1.5-3.3 V), VIL ≤ 0.6 V / 0.4 V respectively. |
| 2 | NO1 | passive | Analog/digital signal port for switch 1, normally open. Connects to COM1 when IN1 = 1. Signal voltage range -0.3 V to 5.5 V; continuous current ±100 mA (±200 mA pulsed). |
| 3 | GND | power_in | Ground reference (0 V) for the device. |
| 4 | NO2 | passive | Analog/digital signal port for switch 2, normally open. Connects to COM2 when IN2 = 1. Signal voltage range -0.3 V to 5.5 V; continuous current ±100 mA (±200 mA pulsed). |
| 5 | IN2 | input | Digital control input for switch 2. Selects whether COM2 connects to NO2 (IN2=1) or NC2 (IN2=0). 1.8 V logic compatible; VIH ≥ 1.6 V (VCC=3.3-5.5 V) or ≥ 1.4 V (VCC=1.5-3.3 V), VIL ≤ 0.6 V / 0.4 V respectively. |
| 6 | COM2 | passive | Port 2 common data terminal. Connects to NC2 or NO2 according to the IN2 select logic. Ron ≈ 3.5 Ω typ; supports true isolation - COMx overrides VCC so very little current flows back to the supply when VCC is dead. |
| 7 | NC2 | passive | Analog/digital signal port for switch 2, normally closed. Connects to COM2 when IN2 = 0. Signal voltage range -0.3 V to 5.5 V; continuous current ±100 mA (±200 mA pulsed). |
| 8 | V+ | power_in | Positive supply voltage (VCC). Operating range 1.5 V to 5.5 V; absolute maximum 6.5 V. Quiescent current < 2 µA (typ 1 µA). |
| 9 | NC1 | passive | Analog/digital signal port for switch 1, normally closed. Connects to COM1 when IN1 = 0. Signal voltage range -0.3 V to 5.5 V; continuous current ±100 mA (±200 mA pulsed). |
| 10 | COM1 | passive | Port 1 common data terminal. Connects to NC1 or NO1 according to the IN1 select logic. Ron ≈ 3.5 Ω typ; supports true isolation - COMx overrides VCC so very little current flows back to the supply when VCC is dead. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TECH PUBLIC |
| Package | MSOP-10L |
| Category | Interface |
| Pins | 10 |
Ordering variants
TS5A23157DGSR-TP
CAD (KiCad official)
- Symbol:
TS5A23157DGSR-TP - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10L (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TECH PUBLIC datasheet (None pp, sha256
f18ef1e41ed88de7, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).