Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

TS391CG-AF5-R

UTC Unisonic Tech · Comparators · SOT-25-5

TS391CG-AF5-R from UTC Unisonic Tech, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN(-) input Inverting comparator input. Common-mode voltage range includes ground: 0V to VCC-1.5V at TA=+25°C. Differential input voltage may equal supply voltage; low-side input must not go below -0.3V.
2 GND power_in Ground / negative supply reference. All voltages are referenced to this pin.
3 IN(+) input Non-inverting comparator input. Common-mode voltage range includes ground: 0V to VCC-1.5V at TA=+25°C. Input bias current 25nA typ, offset current ±5nA typ.
4 Output output Open-collector comparator output. Requires external pull-up to VCC (or other voltage up to +36V). Low-level output voltage 250mV typ at IOUT=4mA; sink current 6mA min at VOUT=1.5V; maximum output current ~20mA.
5 VCC power_in Positive supply pin. Single-supply range +2V to +36V, or ±1V to ±18V split supply. Supply current 0.2mA typ at VCC=5V (no load), 0.5mA typ at VCC=30V.

Key specifications

Parameter Value
Manufacturer UTC Unisonic Tech
Package SOT-25-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TS391CG-AF5-R
  • TS391CG-AL5-R

CAD (KiCad official)

  • Symbol: TS391CG-AF5-R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-25-5 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UTC Unisonic Tech datasheet (6 pp, sha256 148a7cf2cdeb20cf, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF